[Teledyne] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
DPDT PCB Mount, RF Relay 12V dc ER412-12A
TO-5 RF Relay - ER412 Series. Signal switching from dc to 1.0GHz Highly ESD resistant, EMI shielding 10μA-10mV to 28Vdc switching range Hermetically sealed Operating temperature -65 to +125°C H25.91xDia.9.4mm
1 products found
JPY: 25,600
USD: 159.28
-
DPDT PCB Mount, RF Relay 5V dc ER412-5A
TO-5 RF Relay - ER412 Series. Signal switching from dc to 1.0GHz Highly ESD resistant, EMI shielding 10μA-10mV to 28Vdc switching range Hermetically sealed Operating temperature -65 to +125°C H25.91xDia.9.4mm
1 products found
JPY: 24,000
USD: 149.33
-
DPDT PCB Mount, RF Relay 26.5V dc ER412-26A
TO-5 RF Relay - ER412 Series. Signal switching from dc to 1.0GHz Highly ESD resistant, EMI shielding 10μA-10mV to 28Vdc switching range Hermetically sealed Operating temperature -65 to +125°C H25.91xDia.9.4mm
1 products found
JPY: 29,100
USD: 181.06
-
DPDT PCB Mount, RF Relay 12V dc 9.4mm 712D-12
TO-5 RF Relay - 712 Series. Teledyne's TO-5 DPDT relays have become one of the industry standards for low level switching from dry circuit to 1 Amp. Designed for use when close PCB spacing is required, the 712 series have a low coil power dissipation in an ultra-miniature relay package. In addition to the standard types there are the 712 D and 712 TN relays. The 712 D relays have an internal discrete silicon diode which provides coil transient suppression. The 712 TN -5 hybrid relay (stock number < 758-2449') 758-2449 has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PCB floor space requirements as well as saving on installation time. With a low inter-contact capacitance and contact circuit losses, the whole range of 712 series TO-5 relays are excellent ultra-miniature RF switches for frequencies well into the UHF spectrum (see datasheet for performance curves). A typical RF application for the TO-5 relay is in hand held radio transceivers, the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit/Receive switching. Hermetically sealed Excellent switching performance from d.c. to 1GHz High resistance to shock and vibration Gold plated contacts Low insertion loss - isolation and intercontact capacitance of 0.4pF Uni-frame design provides high magnetic efficiency and mechanical rigidity High reliability and excellent resistance to environmental extremes Low profile height of 6.99mm
1 products found
JPY: 21,300
USD: 132.53
-
DPDT PCB Mount, RF Relay 5V dc 9.4mm 712D-5
TO-5 RF Relay - 712 Series. Teledyne's TO-5 DPDT relays have become one of the industry standards for low level switching from dry circuit to 1 Amp. Designed for use when close PCB spacing is required, the 712 series have a low coil power dissipation in an ultra-miniature relay package. In addition to the standard types there are the 712 D and 712 TN relays. The 712 D relays have an internal discrete silicon diode which provides coil transient suppression. The 712 TN -5 hybrid relay (stock number < 758-2449') 758-2449 has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PCB floor space requirements as well as saving on installation time. With a low inter-contact capacitance and contact circuit losses, the whole range of 712 series TO-5 relays are excellent ultra-miniature RF switches for frequencies well into the UHF spectrum (see datasheet for performance curves). A typical RF application for the TO-5 relay is in hand held radio transceivers, the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit/Receive switching. Hermetically sealed Excellent switching performance from d.c. to 1GHz High resistance to shock and vibration Gold plated contacts Low insertion loss - isolation and intercontact capacitance of 0.4pF Uni-frame design provides high magnetic efficiency and mechanical rigidity High reliability and excellent resistance to environmental extremes Low profile height of 6.99mm
1 products found
JPY: 26,200
USD: 163.02
-
DPDT PCB Mount, Hybrid RF Relay 5V dc 9.4mm 712TN-5
TO-5 RF Relay - 712 Series. Teledyne's TO-5 DPDT relays have become one of the industry standards for low level switching from dry circuit to 1 Amp. Designed for use when close PCB spacing is required, the 712 series have a low coil power dissipation in an ultra-miniature relay package. In addition to the standard types there are the 712 D and 712 TN relays. The 712 D relays have an internal discrete silicon diode which provides coil transient suppression. The 712 TN -5 hybrid relay (stock number < 758-2449') 758-2449 has an internal silicon diode and transistor driver. The integrated packaging of the relay with its associated semiconductor devices greatly reduces PCB floor space requirements as well as saving on installation time. With a low inter-contact capacitance and contact circuit losses, the whole range of 712 series TO-5 relays are excellent ultra-miniature RF switches for frequencies well into the UHF spectrum (see datasheet for performance curves). A typical RF application for the TO-5 relay is in hand held radio transceivers, the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit/Receive switching. Hermetically sealed Excellent switching performance from d.c. to 1GHz High resistance to shock and vibration Gold plated contacts Low insertion loss - isolation and intercontact capacitance of 0.4pF Uni-frame design provides high magnetic efficiency and mechanical rigidity High reliability and excellent resistance to environmental extremes Low profile height of 6.99mm
1 products found
JPY: 67,300
USD: 418.74
-
DPDT PCB Mount, RF Relay 12V dc 9.4mm 732-12
TO-5 RF Relay - 732 Series. Teledyne's TO-5 DPDT relays have become one of the industry standards for low level switching from dry circuit to 1 Amp. Designed for use when close PCB spacing is required, the 732 series have a low coil power dissipation in an sub-miniature relay package. With a low inter-contact capacitance and contact circuit losses, the 732 series of TO-5 relays are an excellent sub-miniature RF switch for frequencies well into the UHF spectrum (see datasheet for performance curves). In addition to the standard types there are the 732 D relays which have an internal discrete silicon diode that provides coil transient suppression. A typical RF application for the TO-5 relay is in hand held radio transceivers, the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit/Receive switching. Hermetically sealed High resistance to shock and vibration Gold plated contacts Low insertion loss - isolation and intercontact capacitance of 0.4pF Uni-frame design provides high magnetic efficiency and mechanical rigidity High reliability and excellent resistance to environmental extremes
1 products found
JPY: 19,900
USD: 123.82
-
DPDT PCB Mount, RF Relay 12V dc 9.4mm 732D-12
TO-5 RF Relay - 732 Series. Teledyne's TO-5 DPDT relays have become one of the industry standards for low level switching from dry circuit to 1 Amp. Designed for use when close PCB spacing is required, the 732 series have a low coil power dissipation in an sub-miniature relay package. With a low inter-contact capacitance and contact circuit losses, the 732 series of TO-5 relays are an excellent sub-miniature RF switch for frequencies well into the UHF spectrum (see datasheet for performance curves). In addition to the standard types there are the 732 D relays which have an internal discrete silicon diode that provides coil transient suppression. A typical RF application for the TO-5 relay is in hand held radio transceivers, the combined features of good RF performance, small size, low coil power dissipation and high reliability make it a preferred method of Transmit/Receive switching. Hermetically sealed High resistance to shock and vibration Gold plated contacts Low insertion loss - isolation and intercontact capacitance of 0.4pF Uni-frame design provides high magnetic efficiency and mechanical rigidity High reliability and excellent resistance to environmental extremes
1 products found
JPY: 21,200
USD: 131.91
-
DPDT PCB Mount, RF Relay, 3GHz 5V dc RF103-5
RF100 and RF103 are through hole mount, GRF100 and GRF103 are surface mount Centigrid® relays.. Centigrid® RF Relay - RF100/GRF100 and RF103/GRF103 Series. The Centigrid® RF100 and GRF100 repeatable RF relays, along with the Centigrid® RF103 and GRF103 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range. The through hole mount RF103 (stock number < 758-2509') 758-2509 and the surface mount GRF103 (stock number < 758-2470') 758-2470 are sensitive coil versions of the through hole mount RF100 (stock numbers < 399-9414') 399-9414/ and < 399-9420') 399-9420 and the surface mount GRF100 (stock number < 758-2461') 758-2461 , they have twice the coil resistance of the standard versions so require half the power to operate. Both the sensitive and standard types have a 2.54mm Centigrid® pitch. The RF100 (< 399-9414') 399-9414/ and < 399-9420') 399-9420 have a 7.37mm profile height, the RF103 (< 758-2509') 758-2509 has a 10.03mm profile, the GRF100 (< 758-2461') 758-2461 has a 8.38mm profile and the GRF103 (< 758-2470') 758-2470 has a 11.05mm profile height. The surface mount GRF100 and GRF103 Centigrid® relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These Centigrid® relays are designed for use in RF attenuator switching in Test & Measurement applications, bypass and combiner switching functions in GSM applications, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 22,100
USD: 137.51
-
DPDT PCB Mount, RF Relay 12V dc RF300-12
RF300 and RF303 are through hole mount, GRF303 is a surface mount TO-5 relay.. TO-5 RF Relay - RF300 and RF303/GRF303 Series. The TO-5 RF300 repeatable RF relay, along with the RF303 and GRF303 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range with excellent signal integrity up to 10Gbps. The through hole mount RF303 (stock numbers < 758-2521') 758-2521/ and < 758-2518') 758-2518 and the surface mount GRF303 (stock numbers < 758-2483') 758-2483/ and < 758-2489') 758-2489 are sensitive coil versions of the through hole mount RF300 (stock numbers < 399-9436') 399-9436/ and < 399-9442') 399-9442 , they have twice the coil resistance of the standard version so require half the power to operate. The RF300 (< 399-9436') 399-9436/ and < 399-9442') 399-9442 has a 6.99mm profile height, the RF303 (< 758-2521') 758-2521/ and < 758-2518') 758-2518 has a 9.78mm profile and the GRF303 (< 758-2483') 758-2483/ and < 758-2489') 758-2489 has a 10.6mm profile height. The surface mount GRF303 TO-5 relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These TO-5 relays are designed for use in RF attenuator switching, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth, excellent signal integrity up to 10Gbps Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 19,500
USD: 121.33
-
［Discontinued］DPDT PCB Mount, RF Relay 5V dc RF300-5
RF300 and RF303 are through hole mount, GRF303 is a surface mount TO-5 relay.. TO-5 RF Relay - RF300 and RF303/GRF303 Series. The TO-5 RF300 repeatable RF relay, along with the RF303 and GRF303 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range with excellent signal integrity up to 10Gbps. The through hole mount RF303 (stock numbers < 758-2521') 758-2521/ and < 758-2518') 758-2518 and the surface mount GRF303 (stock numbers < 758-2483') 758-2483/ and < 758-2489') 758-2489 are sensitive coil versions of the through hole mount RF300 (stock numbers < 399-9436') 399-9436/ and < 399-9442') 399-9442 , they have twice the coil resistance of the standard version so require half the power to operate. The RF300 (< 399-9436') 399-9436/ and < 399-9442') 399-9442 has a 6.99mm profile height, the RF303 (< 758-2521') 758-2521/ and < 758-2518') 758-2518 has a 9.78mm profile and the GRF303 (< 758-2483') 758-2483/ and < 758-2489') 758-2489 has a 10.6mm profile height. The surface mount GRF303 TO-5 relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These TO-5 relays are designed for use in RF attenuator switching, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth, excellent signal integrity up to 10Gbps Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 17,700
USD: 110.13
-
［Discontinued］DPDT PCB Mount, RF Relay 5V dc RF100-5
RF100 and RF103 are through hole mount, GRF100 and GRF103 are surface mount Centigrid® relays.. Centigrid® RF Relay - RF100/GRF100 and RF103/GRF103 Series. The Centigrid® RF100 and GRF100 repeatable RF relays, along with the Centigrid® RF103 and GRF103 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range. The through hole mount RF103 (stock number < 758-2509') 758-2509 and the surface mount GRF103 (stock number < 758-2470') 758-2470 are sensitive coil versions of the through hole mount RF100 (stock numbers < 399-9414') 399-9414/ and < 399-9420') 399-9420 and the surface mount GRF100 (stock number < 758-2461') 758-2461 , they have twice the coil resistance of the standard versions so require half the power to operate. Both the sensitive and standard types have a 2.54mm Centigrid® pitch. The RF100 (< 399-9414') 399-9414/ and < 399-9420') 399-9420 have a 7.37mm profile height, the RF103 (< 758-2509') 758-2509 has a 10.03mm profile, the GRF100 (< 758-2461') 758-2461 has a 8.38mm profile and the GRF103 (< 758-2470') 758-2470 has a 11.05mm profile height. The surface mount GRF100 and GRF103 Centigrid® relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These Centigrid® relays are designed for use in RF attenuator switching in Test & Measurement applications, bypass and combiner switching functions in GSM applications, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 19,400
USD: 120.71
-
［Discontinued］DPDT PCB Mount, RF Relay 12V dc RF100-12
RF100 and RF103 are through hole mount, GRF100 and GRF103 are surface mount Centigrid® relays.. Centigrid® RF Relay - RF100/GRF100 and RF103/GRF103 Series. The Centigrid® RF100 and GRF100 repeatable RF relays, along with the Centigrid® RF103 and GRF103 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range. The through hole mount RF103 (stock number < 758-2509') 758-2509 and the surface mount GRF103 (stock number < 758-2470') 758-2470 are sensitive coil versions of the through hole mount RF100 (stock numbers < 399-9414') 399-9414/ and < 399-9420') 399-9420 and the surface mount GRF100 (stock number < 758-2461') 758-2461 , they have twice the coil resistance of the standard versions so require half the power to operate. Both the sensitive and standard types have a 2.54mm Centigrid® pitch. The RF100 (< 399-9414') 399-9414/ and < 399-9420') 399-9420 have a 7.37mm profile height, the RF103 (< 758-2509') 758-2509 has a 10.03mm profile, the GRF100 (< 758-2461') 758-2461 has a 8.38mm profile and the GRF103 (< 758-2470') 758-2470 has a 11.05mm profile height. The surface mount GRF100 and GRF103 Centigrid® relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These Centigrid® relays are designed for use in RF attenuator switching in Test & Measurement applications, bypass and combiner switching functions in GSM applications, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 8,240
USD: 51.27
-
［Discontinued］DPDT Surface Mount, RF Relay, 6GHz 5V dc GRF103-5
RF100 and RF103 are through hole mount, GRF100 and GRF103 are surface mount Centigrid® relays.. Centigrid® RF Relay - RF100/GRF100 and RF103/GRF103 Series. The Centigrid® RF100 and GRF100 repeatable RF relays, along with the Centigrid® RF103 and GRF103 sensitive repeatable RF relays are ultra-miniature, hermetically sealed with DPDT contact configurations designed to provide improved RF signal repeatability over the frequency range. The through hole mount RF103 (stock number < 758-2509') 758-2509 and the surface mount GRF103 (stock number < 758-2470') 758-2470 are sensitive coil versions of the through hole mount RF100 (stock numbers < 399-9414') 399-9414/ and < 399-9420') 399-9420 and the surface mount GRF100 (stock number < 758-2461') 758-2461 , they have twice the coil resistance of the standard versions so require half the power to operate. Both the sensitive and standard types have a 2.54mm Centigrid® pitch. The RF100 (< 399-9414') 399-9414/ and < 399-9420') 399-9420 have a 7.37mm profile height, the RF103 (< 758-2509') 758-2509 has a 10.03mm profile, the GRF100 (< 758-2461') 758-2461 has a 8.38mm profile and the GRF103 (< 758-2470') 758-2470 has a 11.05mm profile height. The surface mount GRF100 and GRF103 Centigrid® relays feature a unique ground shield that isolates and shields each lead to ensure excellent contact-to-contact and pole- to-pole isolation. This ground shield provides a ground interface that results in improved high frequency performance as well as parametric repeatability. These Centigrid® relays are designed for use in RF attenuator switching in Test & Measurement applications, bypass and combiner switching functions in GSM applications, wireless LAN and many other applications that require dependable high performance in which high speed signals must be transferred. Broad bandwidth Hermetically sealed Gold plated contacts Metal enclosure for EMI shielding with high resistance to ESD High isolation between control and signal paths Excellent resistance to shock and vibration High reliability and excellent resistance to environmental extremes Uni-frame design provides high magnetic efficiency and mechanical rigidity
1 products found
JPY: 9,280
USD: 57.74
