[Hengstler] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
-
Hengstler Incremental Encoder 1000 ppr 6000rpm Solid 10 → 30 V dc RI32-O/ 1000ER.11KB
Mounting plate ; 260-3998 260-3998 is only suitable for the Hollow Shaft type encoders such as ; 260-3948 260-3948 , ; 291-4399 291-4399 etc. RI32 Miniature. Low torque/high efficiency with ball bearings
1 products found
JPY: 62,200
USD: 387.01
-
Hengstler 8 Digit, LCD, Digital Counter, 7.5kHz 0 731 101
LCD/LED Counter. Units display rate per minute of pulses received Resettable 7mm digit height 0 → +50°C operating temperature IP54 rated with 45 x 22 mm panel cut out Data retention better than 10 years, 7 years for battery types
1 products found
JPY: 24,400
USD: 151.82
-
Hengstler Hour Counter, 8 digits, LCD, Screw Connection 0 731 103
LCD Time Counters. Can display as either hours, minutes and seconds or total number of hours Resettable display Powered by 3V lithium battery apart from ; 227-4865 227-4865 which is externally powered (12-24Vdc) Panel cut out 45 x 22mm IP54 rated
1 products found
JPY: 24,200
USD: 150.57
-
Hengstler 8 Digit, LCD, Digital Counter, 7.5kHz, 12 → 24 V dc 0 731 202
Position Indicator/Tachometer. Units display rate per minute of pulses received Resettable 7mm digit height 0 to +50°C operating temperature
1 products found
JPY: 22,800
USD: 141.86
-
Hengstler 8 Digit, LCD, Digital Counter, 20Hz, 12 → 250 V ac/dc 0 731 301
LCD/LED Counter. Units display rate per minute of pulses received Resettable 7mm digit height 0 → +50°C operating temperature IP54 rated with 45 x 22 mm panel cut out Data retention better than 10 years, 7 years for battery types
1 products found
JPY: 32,100
USD: 199.73
-
Hengstler 6 Digit, LED, Digital Counter, 7.5kHz, 12 → 24 V dc 0 731 501
LCD/LED Counter. Units display rate per minute of pulses received Resettable 7mm digit height 0 → +50°C operating temperature IP54 rated with 45 x 22 mm panel cut out Data retention better than 10 years, 7 years for battery types
1 products found
JPY: 56,100
USD: 349.05
-
Hengstler 6 Digit, LED, Digital Counter, 7.5kHz, 12 → 24 V dc 0 731 502
LCD/LED Counter. Units display rate per minute of pulses received Resettable 7mm digit height 0 → +50°C operating temperature IP54 rated with 45 x 22 mm panel cut out Data retention better than 10 years, 7 years for battery types
1 products found
JPY: 58,300
USD: 362.74
-
Hengstler Incremental Encoder 100 ppr 6000rpm Solid 10 → 30 V dc RI32-O/ 100ER.11KB
Mounting plate ; 260-3998 260-3998 is only suitable for the Hollow Shaft type encoders such as ; 260-3948 260-3948 , ; 291-4399 291-4399 etc. RI32 Miniature. Low torque/high efficiency with ball bearings
1 products found
JPY: 60,000
USD: 373.32
-
Hengstler Incremental Encoder 360 ppr 6000rpm Solid 10 → 30 V dc 527042
RI32 incremental rotary transducer, shaft, 30 mm
1 products found
JPY: 62,200
USD: 387.01
-
Hengstler Incremental Encoder 1024 ppr 6000rpm Solid 10 → 30 V dc RI32-O/ 1024ER.11KB
Mounting plate ; 260-3998 260-3998 is only suitable for the Hollow Shaft type encoders such as ; 260-3948 260-3948 , ; 291-4399 291-4399 etc. RI32 Miniature. Low torque/high efficiency with ball bearings
1 products found
JPY: 64,500
USD: 401.32
-
Hengstler Incremental Encoder 50 ppr 10000rpm 10 → 30 V dc RS0-529-178
RI38 Universal Mounting. Low torque/High efficiency with ball bearings
1 products found
JPY: 66,300
USD: 412.52
-
Hengstler Incremental Encoder 100 ppr 10000rpm 10 → 30 V dc RS38-O/100EQ.11KB
RI38 Universal Mounting. Low torque/High efficiency with ball bearings
1 products found
JPY: 66,900
USD: 416.25
-
Hengstler Incremental Encoder 500 ppr 10000rpm 10 → 30 V dc RS0-529-181
RI38 Universal Mounting. Low torque/High efficiency with ball bearings
1 products found
JPY: 66,300
USD: 412.52
-
Hengstler Encoder Wheel Circumference 50cm, 10mm Wheel Bore Aluminium 0 601 163
500mm Circumference Measuring Wheel. Cast aluminium body For use with 10mm diameter shafts Long lasting tread Rubber tread for good grip, low wear Plastic tread for greasy metals and steel sections
1 products found
JPY: 31,800
USD: 197.86
-
Hengstler Flexible Beam Coupling RS0070653
Couplings for rotary transducers
Flexible shaft connection with axial, radial or angled offset1 products found
JPY: 15,400
USD: 95.82
-
Hengstler 25mm OD Coupling RS3520066
Couplings for rotary transducers. Flexible shaft connection with axial, radial or angled offset
1 products found
JPY: 15,400
USD: 95.82
-
Hengstler 25mm OD Coupling RS3520065
Couplings for rotary transducers. Flexible shaft connection with axial, radial or angled offset
1 products found
JPY: 17,800
USD: 110.75
-
Hengstler Flexible Beam Coupling RS1761026
Couplings for rotary transducers
Flexible shaft connection with axial, radial or angled offset1 products found
JPY: 5,260
USD: 32.73
-
Hengstler Absolute Encoder 10000rpm Solid 10 → 30 V dc RC58/0012EK.42SGB
Rotary transducer AC58 - absolute, single turn, 58 mm. "ACURO Industry" series Single turn design Integrated safety and monitoring system Magnetically insensitive Maintenance-free as no battery Compact dimensions Preset key Diagnostic LEDs
1 products found
JPY: 121,000
USD: 752.86
-
Hengstler Absolute Encoder 10000rpm Solid 7 → 30 V dc 541211
Absolute Encoder AC36 - 10mm Shaft. 12 bit resolution SSI gray interface Optical encoder with a true geared multiturn Operating temperature: -40 to 100°C Connection: Cable radial 1.5m
1 products found
JPY: 121,000
USD: 752.86
-
Hengstler Absolute Encoder 2048 ppr 10000rpm Hollow 5 V dc 541068
Motor Feedback AD35 - 8mm Shaft. Singleturn 13 bit resolution SSI Gray + SinCos 1VSS Plastic housing Operatiing temperature: -15 to 120°C Connection: pcb connector 12 pole radial 0,5m cable
1 products found
JPY: 266,000
USD: 1,655.05
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 12 → 30 V dc 0 772 402
Multifunctional Counter - Tico 773. Universally applicable as tachometer, timer, shift-counter and batch-counter. Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program 4 keys to address presets, prescaler and separate totaliser Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250 V ac / 30 V dc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical Applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 64,000
USD: 398.21
-
Hengstler 8 Digit, LCD, Digital Counter, 7.5kHz, 12 → 24 V dc 0 731 201
LCD/LED Counter. Units display rate per minute of pulses received Resettable 7mm digit height 0 → +50°C operating temperature IP54 rated with 45 x 22 mm panel cut out Data retention better than 10 years, 7 years for battery types
1 products found
JPY: 23,000
USD: 143.11
-
Hengstler Hour Counter, 8 digits, LCD, Screw Connection, 12 → 24 V dc 0 731 203
LCD Time Counters. Can display as either hours, minutes and seconds or total number of hours Resettable display Powered by 3V lithium battery apart from ; 227-4865 227-4865 which is externally powered (12-24Vdc) Panel cut out 45 x 22mm IP54 rated
1 products found
JPY: 23,500
USD: 146.22
-
Hengstler 6 Digit, LED, Digital Counter, 7.5kHz, 12 → 24 V dc 0 731 506
Position Indicator/Tachometer. Units display rate per minute of pulses received Resettable 7mm digit height 0 to +50°C operating temperature
1 products found
JPY: 31,500
USD: 195.99
-
Hengstler Incremental Encoder 360 ppr 6000rpm Hollow 10 → 30 V dc 0532219
RI 58-D series incremental hollow shaft encoders. Encoders with diameter of 58 mm, for direct mounting at end of motor arm. Reduced housing depth for highly compact mounting. Simplicity and safety of coupling to the shaft thanks to the use of a concentric clip. High precision of output signals for use in the most demanding applications. Use of Opto-Asic technology for greater reliability and protection against electrical and electromagnetic interference. Integrated control circuitry with alarm output.
1 products found
JPY: 120,000
USD: 746.64
-
Hengstler Incremental Encoder 10000rpm Hollow 10 → 30 V dc RS0530017
DIN EN 61010-1. Rotary encoder RI36, incremental, hollow shaft, 36 mm. Short-circuit and reverse polarity proof Protection class III Pollution degree 2 Overvoltage category II
1 products found
JPY: 111,000
USD: 690.64
-
Hengstler Incremental Encoder 5000 ppr 10000rpm 10 → 30 V dc RS1761026
DIN VDE 0160. Rotary encoder RI59 incremental, shaft, 58 mm, stainless steel. Short-circuit and reverse polarity proof Protection class III Pollution degree 2 Overvoltage category II
1 products found
JPY: 144,000
USD: 895.97
-
Hengstler 19.2mm OD Coupling RS3520035
Couplings for rotary transducers. Flexible shaft connection with axial, radial or angled offset
1 products found
JPY: 15,400
USD: 95.82
-
Hengstler 25mm OD Coupling RS3520033
Couplings for rotary transducers. Flexible shaft connection with axial, radial or angled offset
1 products found
JPY: 5,260
USD: 32.73
-
Hengstler Absolute Encoder 10000rpm Solid 7 → 30 V dc 0541115
Absolute Encoder AC36 - 10mm Shaft. 12 bit resolution SSI gray interface Optical encoder with a true geared multiturn Operating temperature: -40 to 100°C Connection: Cable radial 1.5m
1 products found
JPY: 173,000
USD: 1,076.41
-
Hengstler Absolute Encoder 2048 ppr 10000rpm Hollow 7 → 30 V dc AD36/0013EF.0RSCB
Motor Feedback AD36 - 8mm Shaft. 13 or 17 bit resolution SSI Gray + Quadrature 1Vp-p Optical encoder with a true geared multiturn Operating temperature: -40 to 120°C PCB connector 12 pole radial 0,5m cable
1 products found
JPY: 142,000
USD: 883.52
-
Hengstler Absolute Encoder 2048 ppr 10000rpm Hollow 7 → 30 V dc AD36/1213EF.0RSCB
Motor Feedback AD36 - 8mm Shaft. 13 or 17 bit resolution SSI Gray + Quadrature 1Vp-p Optical encoder with a true geared multiturn Operating temperature: -40 to 120°C PCB connector 12 pole radial 0,5m cable
1 products found
JPY: 194,000
USD: 1,207.07
-
Hengstler Absolute Encoder 2048 ppr 10000rpm 5 V dc AD58/0017A1.0KSCB
Absolute Encoder AD58 - 10mm Shaft. 13 or 17 bit resolution SSI Gray + SinCos 1VSS Optical encoder with a true geared multiturn Operatiing temperature: -15 to 120°C PCB connector, 12 pole, with mating connector and 0.5 m cable
1 products found
JPY: 170,000
USD: 1,057.74
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 12 → 30 V dc 0 772 101
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 62,800
USD: 390.74
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 12 → 30 V dc 0 772 102
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 63,300
USD: 393.85
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 24 V ac 0 772 111
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 68,000
USD: 423.10
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 24 V ac 0 772 112
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 68,600
USD: 426.83
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 230 V ac 0 772 131
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 68,000
USD: 423.10
-
Hengstler 6 Digit, LCD, Digital Counter, 60kHz, 230 V ac 0 772 132
The highest count frequency of 60 kHz can only be reached at a special calibration and parameter, this is otherwise quoted at 30 kHz. Multifunctional Counter - tico 772. Universally applicable as tachometer, timer, shift-counter and batch-counter Simplified handling Separate preset adjustment (signal 1, trail preset, range or limit value) Versatile and easy to program, 4 keys to directly address presets, prescaler and seperate totalizer Clearly readable display with large digits Display and preset range: -999 999 to +999 999 Alarm signal: display flashes when preset 0, 1 or 2 are active Input frequency up to 60 kHz Relay outputs: 250Vac / 30Vdc / 5A Easy installation due to pluggable terminals 3 Presets IP65 protection (front panel). Typical applications:. Time controlling Position indication Batch counting Cutting to length Rotation speed controlling
1 products found
JPY: 68,600
USD: 426.83
