[Hammond] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
- by Product group
- by Product
Sort by:
-
Hammond 1599, ABS Enclosure, IP54, 170 x 85 x 34mm 1599EBK
Stock nos. ; 770-9350 770-9350 , ; 770-9353 770-9353 , ; 818-0533 818-0533 ; ; 818-0542 818-0542 have a battery compartment, accepts either four AA batteries or one 9 volt PP3 battery. Hammond 1599 Handheld Enclosure, Tablet. The Hammond Tablet enclosure with its low profile is ergonomically designed for handheld comfort and is ideally suited to house instrument or mobile data applications that require a touch screen. This handheld case is moulded from flame retardant ABS plastic and carries a UL flammability rating of 94V-0. Available with either a black, RAL 9011 colour housing or a grey, RAL 7035 colour housing. Features and Benefits. Both the display and keyboard areas are recessed for membrane devices Moulded from flame retardant ABS plastic, choice of black (RAL 9011) or grey (RAL 7035) - material carries a UL flammability rating of 94V-0. Handheld section of enclosure has a dark grey (RAL 7012) soft sided plastic grip Enclosure is assembled with six M3-0.5x18mm Philips machine screws, threaded into integral brass bushings. Integral brass bushings are factory inserted into top half of the enclosure Lap joint construction provides protection against access of dust and splashing water, IP54 PCB mounts are moulded into the top and bottom halves of the case Available with or without a battery door/compartment Contains one removable end panel for easy modification Bottom half of enclosure has a square moulded inlay for labels, 50x50mm. (IP) Ingress Protection and what it means. IP rating classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. FAQ's. Can the enclosure be used outside?. This enclosure holds some waterproof qualities, but not enough to be used outside being IP54.
1 products found
JPY: 1,740
USD: 10.91
-
Hammond, ABS, Handheld Enclosure, IP54 ,220 mm x 44.8 mm x 110 mm 1599HSGY
Flame retardant version carries a UL flammability rating of 94V-0. Hand Held Instrument Cases. Moulded in either flame retardant ABS or general purpose ABS plastic. 2-piece lap joint construction Designed to meet IP54 Extra deep top and shallow base sections Recessed area on top of case for keypads/displays, etc. Lid is secured with either Philips machine screws, threaded into tapped integral brass bushings (flame retardant version or self tapping screws (general purpose version) Base with moulded knockouts for wall mounting Top and base have 6 bosses for PCB mounting Tops have vertical card guides
1 products found
JPY: 2,110
USD: 13.23
-
Hammond, ABS, Handheld Enclosure With Integral Battery Compartment ,92 mm x 28 mm x 66 mm 1593PGY
Instrument cases with one panel include a battery compartment for 1 x PP3 or 2 x AA batteries. Hand Held Instrument Case. The Hammond 1593 Series is a handheld electronic enclosure, ideally suited for mounting printed circuit boards (PCBs). The enclosure is ergonomically designed for a comfortable fit in the users hand and has a two piece lap joint construction which provides IP54 protection against dust and splashing water. These instrument cases are moulded in black or grey general purpose ABS plastic and are secured with self tapping screws. Electronic instrument enclosure, ideally suited for mounting printed circuit boards Ergonomically designed for a comfortable fit into the user's hand Recessed top for membrane display or pad Units with battery door use a long life three snap door Lap joint construction provides protection against dust accumulation and splashing water Moulded in grey or black general purpose ABS plastic with a satin texture Enclosure is secured with self tapping screws
1 products found
JPY: 1,350
USD: 8.46
-
Hammond 1590, Die Cast Aluminium Enclosure, IP66, Shielded, 79.6 x 74.6 x 52mm 1590Z100
Overall height includes lid. Watertight Thick Wall Diecast Aluminium Enclosure, IP66. Hammond Manufacturing 1590X Diecast Aluminum Enclosures are rugged and easy to machine electronic instrument enclosures.These enclosures provide low wide wall draft angles (2 degrees or less) for easy mounting of printed circuit board. 1590X are lap joint constructed to provide protection against access of dust and splashing water, as well as improved EMI/RFI shielding. These enclosures provide the unpainted version in vibra finish to assure no sharp edges. The satin black version is painted with tough polyester powder paint for a lasting finish, even after machining. 1590X enclosures are available with four (4) 6-32 x 1/2" machine screws to secure the lid into factory tapped holes. Features and Benefits. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Two piece tongue ; groove construction with a one piece neoprene gasket provides protection against dust and water Ideal for repetitive opening and closing Four recessed stainless steel machine screws secure lid into factory tapped holes Easy to wall mount using 'through box - blind hole' construction, outside of gasket protection Lid screws are self captivating (lid holes are threaded with the first installation of lid screws) Designed to meet IP66. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 5,710
USD: 35.79
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 50.5 x 50.5 x 31mm 1590LB
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 1,750
USD: 10.97
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, 52.5 x 38 x 31mm 1590H
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 1,870
USD: 11.72
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, 112.4 x 60.5 x 31mm 1590B
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,020
USD: 12.66
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 188 x 120 x 37mm 1590DD
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 4,810
USD: 30.15
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, 121.2 x 65.5 x 39.8mm 1590N1
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,940
USD: 18.43
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 110.5 x 82.4 x 44mm 1590S
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,670
USD: 16.74
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 145 x 95 x 49.1mm 1590J
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 3,080
USD: 19.31
-
Hammond 1590, Die Cast Aluminium Enclosure, Shielded, 187.75 x 119.5 x 56mm 1590D
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 5,200
USD: 32.60
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 119.5 x 94 x 56.5mm 1590C
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,950
USD: 18.49
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 120 x 80 x 59mm 1590T
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,550
USD: 15.98
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 120 x 120 x 58.6mm 1590U
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. The enclosure, also known as a Stomp Box, is available in a rectangular, trapezoidal or octagonal design. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 3,970
USD: 24.89
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 92.5 x 38.5 x 27mm 1590AFL
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures with Flanged Lid. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting Flanged Lids allow for wall or shelf mounting External Length excludes flanges. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 1,860
USD: 11.66
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, Flanged, 111.5 x 59.5 x 27mm 1590BFL
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures with Flanged Lid. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting Flanged Lids allow for wall or shelf mounting External Length excludes flanges. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 2,010
USD: 12.60
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, Flanged, 217 x 119.5 x 33.26mm 1590DDFL
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures with Flanged Lid. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting Flanged Lids allow for wall or shelf mounting External Length excludes flanges. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 4,310
USD: 27.02
-
Hammond 1590, Die Cast Aluminium Enclosure, IP54, Shielded, 121.1 x 66 x 35.3mm 1590N1FL
Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). IP54 Diecast Enclosures with Flanged Lid. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction which provides IP54 protection against dust and splashing water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy, tough yet easy to machine Lap joint construction provides IP54 protection against dust and splashing water also provides improved EMI/RFI shielding Vibra finished for a smooth surface with no sharp edges Four or six, depending on size of enclosure, 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Low side wall draft angle (2° or less) for easy PC board mounting Flanged Lids allow for wall or shelf mounting External Length excludes flanges. FAQ:. What does IP rating means?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Color matched screws
1 products found
JPY: 3,090
USD: 19.37
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, Shielded, 53 x 38 x 31mm 11451PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 940
USD: 5.89
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, Shielded, 92 x 38 x 31mm 27969PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 1,080
USD: 6.77
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, 111 x 60 x 31mm 27134PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 1,210
USD: 7.59
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, 145 x 95 x 49mm 10758PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 4,900
USD: 30.72
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, 120 x 95 x 53mm 26908PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 2,680
USD: 16.80
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, Shielded, 188 x 120 x 57mm 26827PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 6,060
USD: 37.99
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, 125 x 125 x 79mm 11130PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 4,970
USD: 31.15
-
Hammond Shallow Lid - Thin Wall, Die Cast Aluminium Enclosure, IP54, Shielded, 188 x 120 x 82mm 26357PSLA
Thin Wall Diecast Enclosure, IP54. The Hammond 11451 series also known as Hammond Eddystone series enclosures are made from natural finished aluminium. Durable and impact resistant, also features IP54 rating that guarantees resistant from splashing water from any direction. Features and Benefits:. Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure Aluminium alloy to BS1490, LM2M - in natural finish Lap joint construction provides protection against dust and splashing water, also provides improved EMC performance Lids are retained by M3.5 x x12 countersunk screws (POZIDRIV No. 2 head) Countersunk lid holes Designed to meet IP54 Low side wall draft angle (2 degrees or less) for easy PCB mounting. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 cover screws
1 products found
JPY: 6,730
USD: 42.19
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, 51 x 51 x 27mm 1590WLB
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 2,370
USD: 14.86
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 92.5 x 38.5 x 31mm 1590WA
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 2,060
USD: 12.91
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 119.5 x 94 x 34mm 1590WBB
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 3,360
USD: 21.06
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 101 x 73 x 41.05mm 1590WS
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 2,860
USD: 17.93
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 153 x 83 x 50.5mm 1590WP1
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 3,480
USD: 21.81
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 188 x 120 x 52.43mm 1590WD
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 5,620
USD: 35.23
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, Shielded, 125.5 x 80 x 59mm 1590WT
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 3,290
USD: 20.62
-
Hammond 1590, Die Cast Aluminium Enclosure, IP65, 120 x 120 x 94mm 1590WV
Replacement Lid screws 6-32 UNC x " clear with o-ring. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Hammond 1590 Watertight Diecast Aluminium Enclosures. The Hammond 1590 series is a rugged diecast aluminium alloy enclosure suitable for electronic instruments which is tough, yet easy to machine. It has a lap joint construction with a self adhesive silicone gasket around the lid perimeter which provides IP65 protection against dust and water and also provides improved EMI/RFI shielding. Features and Benefits:. Rugged, diecast aluminium alloy 384 (tough yet easy to machine), electronic instrument enclosure Lap joint construction with a silicone rubber gasket which fits around the perimeter of the lid provides protection against dust and water Silicone rubber gasket remains flexible from -62 to +232 °C (-80 to +450 °F) Vibra finished for a smooth surface with no sharp edges Four (or 6 in 1590D, 1590DD, 8 in 1590F) 6-32 x 1/2 in. stainless steel machine screws secure lid into factory tapped holes Screws use neoprene 'O' rings (included) Designed to meet IP65. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid 4 cover screws
1 products found
JPY: 5,880
USD: 36.86
-
Hammond 1594, Polystyrene Enclosure, IP54, 56 x 56 x 40mm 1594ASGY
UL flammability rating of 94V-0. Heavy Duty ABS Enclosures 1594 Series. Hammond Series 1594 Enclosures are heavy duty, thick wall type enclosures that guarantee fire resistance and IP rating up to IP54. Enclosures are moulded from high-quality ABS plastic and feature self-tapping screw mounting type lid. Perfect for applications with repetitive assembly and disassembly required.. Features and Benefits:. Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. Heavy duty, thick wall design with an average wall thickness of .13 (3.3 mm). Flame retardant ABS plastic (carries a UL flammability rating of 94V-0). Perfect for applications with repetitive assembly and disassembly required. Molded in general purpose ABS plastic. Utilizes self tapping screws into plastic posts (no brass inserts). IP54 rated. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Set of 4 self-tapping screws
1 products found
JPY: 1,550
USD: 9.72
-
Hammond 1594, Polystyrene Enclosure, IP54, 81 x 56 x 40mm 1594BSGY
UL flammability rating of 94V-0. Heavy Duty ABS Enclosures 1594 Series. Hammond Series 1594 Enclosures are heavy duty, thick wall type enclosures that guarantee fire resistance and IP rating up to IP54. Enclosures are moulded from high-quality ABS plastic and feature self-tapping screw mounting type lid. Perfect for applications with repetitive assembly and disassembly required.. Features and Benefits:. Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. Heavy duty, thick wall design with an average wall thickness of .13 (3.3 mm). Flame retardant ABS plastic (carries a UL flammability rating of 94V-0). Perfect for applications with repetitive assembly and disassembly required. Molded in general purpose ABS plastic. Utilizes self tapping screws into plastic posts (no brass inserts). IP54 rated. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Set of 4 self-tapping screws
1 products found
JPY: 1,690
USD: 10.59
-
Hammond 1594, Polystyrene Enclosure, IP54, 167 x 107 x 65mm 1594ESGY
UL flammability rating of 94V-0. Heavy Duty ABS Enclosures 1594 Series. Hammond Series 1594 Enclosures are heavy duty, thick wall type enclosures that guarantee fire resistance and IP rating up to IP54. Enclosures are moulded from high-quality ABS plastic and feature self-tapping screw mounting type lid. Perfect for applications with repetitive assembly and disassembly required.. Features and Benefits:. Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. Heavy duty, thick wall design with an average wall thickness of .13 (3.3 mm). Flame retardant ABS plastic (carries a UL flammability rating of 94V-0). Perfect for applications with repetitive assembly and disassembly required. Molded in general purpose ABS plastic. Utilizes self tapping screws into plastic posts (no brass inserts). IP54 rated. FAQ:. What does IP rating mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SOLUTIONS section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. Set of 4 self-tapping screws
1 products found
JPY: 1,870
USD: 11.72
-
Hammond 1591, Polycarbonate Enclosure, IP54, 112 x 62 x 27mm 1591BTBU
UL flammability rating of 94V-0. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Translucent Blue Boxes. The Hammond 1551 series is a miniature enclosure moulded in translucent blue, general purpose ABS plastic with a satin texture finish. Each enclosure has 2 PC board standoffs moulded into the interior and a lap joint construction which provides IP54 protection against the access of dust and splashing water. The lid of the enclosure is secured with 2 self-tapping 4x1/2in. screws. Features and Benefits:. Translucent flame retardant polycarbonate to UL94V-0 Almost totally transparent to infra-red devices, ideal for applications where parts, sensors or indicators need to be visible Integral card guides accept 1.5mm PCBs Two piece lap joint construction gives IP54 protection Lids secured with M3x10mm Philips machine screws, threaded into integral brass bushes to assist repeated removal of lid External height includes 4mm for lid. FAQ:. What does IP mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SELECTION section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 x M3x10mm Phillips screws
1 products found
JPY: 2,240
USD: 14.04
-
Hammond 1591, Polycarbonate Enclosure, IP54, 120 x 65 x 36mm 1591CTBU
UL flammability rating of 94V-0. Dimensions do not include the lid and exclude flanges (add 4mm to height for the lid). Translucent Blue Boxes. The Hammond 1551 series is a miniature enclosure moulded in translucent blue, general purpose ABS plastic with a satin texture finish. Each enclosure has 2 PC board standoffs moulded into the interior and a lap joint construction which provides IP54 protection against the access of dust and splashing water. The lid of the enclosure is secured with 2 self-tapping 4x1/2in. screws. Features and Benefits:. Translucent flame retardant polycarbonate to UL94V-0 Almost totally transparent to infra-red devices, ideal for applications where parts, sensors or indicators need to be visible Integral card guides accept 1.5mm PCBs Two piece lap joint construction gives IP54 protection Lids secured with M3x10mm Philips machine screws, threaded into integral brass bushes to assist repeated removal of lid External height includes 4mm for lid. FAQ:. What does IP mean?. The IP rating is used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc) and moisture. For more information please, visit SELECTION section at the top of the page or click on Selection Guide of an Enclosures. What is supplied?. An enclosure with a lid. 4 x M3x10mm Phillips screws
1 products found
JPY: 2,680
USD: 16.80
