[EAO]Electronic/Electrical Parts and Controll Equipments
Filters
- by Product group
- by Product
Sort by:
-
2 Piece Push Button Tool Kit 02-905 + 02-906
When replacing the lamp the switch may become actuated. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock number ; 749-2611 749-2611 typically. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Assembly Tool Kit - EAO 31 Series. A dedicated tool kit for the EAO 31 Series of illuminated push button switches and indicators. The EAO 31 Series tool kit consists of two tools that help with installation or maintenance; a lens remover and a filament lamp insert/extraction tool.
1 products found
JPY: 4,460
USD: 27.96
-
EAO Single Pole Single Throw (SPST) Momentary Push Button Switch, IP40, 8 (Dia.)mm, Panel Mount 19-431.035
Illuminated versions require a T1 bi-pin filament lamp or LED, see typically stock no's ; 6559491 6559491. 9 mm Round ; Square Illuminated Switches. The pushbuttons are fitted with snap-action or low-level switching systems Mounting from the front through the mounting hole is assured even when the wiring has already been attached The units are equipped with soldering/plug-in terminals
1 products found
JPY: 3,440
USD: 21.56
-
EAO Single Pole Single Throw (SPST) Momentary Push Button Switch, IP40, 8 (Dia.)mm, Panel Mount 19-139.035
Illuminated versions require a T1 bi-pin filament lamp or LED, see typically stock no's ; 6559491 6559491. 9 mm Round ; Square Illuminated Switches. The pushbuttons are fitted with snap-action or low-level switching systems Mounting from the front through the mounting hole is assured even when the wiring has already been attached The units are equipped with soldering/plug-in terminals
1 products found
JPY: 4,540
USD: 28.46
-
Illuminated Push Button Switch, IP40, Panel Mount, Momentary for use with Series 31 -25°C +55°C 31-121.0252
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 8,210
USD: 51.46
-
Illuminated Push Button Switch, IP40, Panel Mount, Latching for use with Series 31 -25°C +55°C 31-262.0252
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 15,200
USD: 95.28
-
EAO Red Mushroom Push Button, NO/NC, 16mm Maintained PCB Pin 51-256.025
ENEC (EN61058-1), CSA, CB. EAO Stop Switches, Series 51. EAO Stop Switch, Series 51 is a compact design stop switch with less than 19mm back panel depth. The Series 51 Stop Switch utilises a mono block design with an integral switch which minimises the back panel depth and offers an extremely rugged construction that protects the switch from damage. The series 51 Stop Switch has been tested beyond 100,000 actuations. Typical switch applications include medical diagnostic equipment, machine and process controls, hand held terminals, supermarket checkouts and many others. Back panel depth of only 18.8 mm Visible actuation status, twist to release Attractive and ergonomic design Protected to IP65 from the front
1 products found
JPY: 6,830
USD: 42.81
-
EAO Single Pole Double Throw (SPDT) Momentary Blue LED Push Button Switch, IP65, IP67, 19 (Dia.)mm, Panel Mount, 24V 82-5551.1124
CE, UL. EAO Series 82 Illuminated Anti-Vandal Switches. Series 82 illuminated anti-vandal switches from EAO. The switches have an aesthetic design combined with a robust metal housing and conform to protection ratings; IK10 (physical attack) and IP67 (Dust and waterproof), making them ideal for use in public areas and harsh conditions. Three size versions are available for mounting into cut-outs of 16, 19 and 22mm. Aluminium construction Flat, convex and raised button types available Daylight readable illumination Excellent tactile switching action
1 products found
JPY: 4,560
USD: 28.58
-
EAO Single Pole Double Throw (SPDT) Momentary Blue LED Push Button Switch, IP65, IP67, 22 (Dia.)mm, Panel Mount, 12V 82-6551.1123
CE, UL. EAO Series 82 Illuminated Anti-Vandal Switches. Series 82 illuminated anti-vandal switches from EAO. The switches have an aesthetic design combined with a robust metal housing and conform to protection ratings; IK10 (physical attack) and IP67 (Dust and waterproof), making them ideal for use in public areas and harsh conditions. Three size versions are available for mounting into cut-outs of 16, 19 and 22mm. Aluminium construction Flat, convex and raised button types available Daylight readable illumination Excellent tactile switching action
1 products found
JPY: 4,860
USD: 30.46
-
EAO Single Pole Double Throw (SPDT) Momentary Green LED Push Button Switch, IP65, IP67, 22 (Dia.)mm, Panel Mount, 24V 82-6551.1134
CE, UL. EAO Series 82 Illuminated Anti-Vandal Switches. Series 82 illuminated anti-vandal switches from EAO. The switches have an aesthetic design combined with a robust metal housing and conform to protection ratings; IK10 (physical attack) and IP67 (Dust and waterproof), making them ideal for use in public areas and harsh conditions. Three size versions are available for mounting into cut-outs of 16, 19 and 22mm. Aluminium construction Flat, convex and raised button types available Daylight readable illumination Excellent tactile switching action
1 products found
JPY: 5,940
USD: 37.23
-
EAO Latching Red LED Emergency Stop Switch, IP65, 22.5 (Dia.)mm, Panel Mount, Arrows (symbol) 704.066.2
DIN EN ISO 13850 and EN 60204-1. See Essential Accessories for compatible switching elements. Series 04 IP65 Sealed Emergency Stop, Key Release. Product Design. This emergency stop switch actuator has been designed for industry standard 22.5 mm panel cut outs. This design makes them suitable to replace existing units or for new panel designs. It has a 37 mm diameter, red mushroom head with a yellow shaft making it highly visible. Reset Method. Once the switch has been actuated, a key is required to reset the circuit. White arrows on the front show the direction to turn the key and two keys are supplied with each unit. Features and Benefits. Front Protection: IP65 Up to 3 slow-make switching elements can be clipped on Lock type: Euro-Locks 9500 Highly visible: Red actuator on yellow shaft Industry standard 22.5 mm panel cut out
1 products found
JPY: 14,800
USD: 92.77
-
Momentary Action Contact Unit for use with 61 Series 61-8410.22
IEC 947-5-1 and EN 60-947-5-1. For suitable removal tool see stock number ; 219-5481 219-5481. EAO Contact Blocks, Series 61. Snap-action switching element for Series 61 Pushbutton, Keylock and Selector switches Switch rating: 250Vac, 5A
1 products found
JPY: 2,720
USD: 17.05
-
Push Button Tactile Switch 99-450.837
Illuminated Pushbutton PCB Mount Switches. These illuminated pushbutton PCB mount switches offer high performance and are available as both tactile and non-tactile versions. A variety of accessories are also available for these pushbutton switches. Typical applications include audio and instrumentation. High performance switches, with gold plated contacts, for use in audio and instrumentation applications Switches are single pole normally open format with a non-tactile option for ‘silent ‘ operation (momentary types only) Contact rating 100mA (42Vac) Insulation resistance 10 ;sup>12 ;/sup>Ω Switch mechanical life 5 x 10 ;sup>6 ;/sup> operations Lens caps are available with either flat or concave tops which may be easily removed to mark legends either by printing or engraving The option of coloured insert films further extends the flexibility of this range The matching keyswitch completes the range by offering low level, ‘anti-tamper ‘ security Switch banks may be formed by joining units together using the coupling sections Illumination is by T1 bi-pin lamp or LED
1 products found
JPY: 3,000
USD: 18.81
-
EAO Single Pole Single Throw (SPST) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-425.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 4,620
USD: 28.96
-
EAO Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-423.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 7,580
USD: 47.52
-
EAO Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-421.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 7,860
USD: 49.27
-
EAO Single Pole Double Throw (SPDT) Latching Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-461.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 8,280
USD: 51.90
-
EAO Latching White LED Push Button Switch, IP40, 18 x 24mm, PCB 31-041.006
To make a complete indicator you will need the indicator, a lens and a filament lamp or LED. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of lenses see stock numbers ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Indicator - EAO 31 Series. The EAO 31 series of indicators are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. Illumination for the EAO 31 series indicator is via a T1 midget groove filament lamp or single chip LED with a supply voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. The EAO 31 series indicators are available in a choice of square or rectangular bezels. The square indicator (stock number ; 248-5368 248-5368 ) has a 18x18mm bezel while the rectangular indicator (stock number ; 248-5295 248-5295 ) has a 18x24mm bezel. Both versions require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm, the indicators overall depth behind the panel is only 36mm. Universal terminals allow either direct soldering or PCB mounting Self-extinguishing (Polyetherimide) actuator housing material Raised button profile
1 products found
JPY: 3,510
USD: 22.00
-
EAO Single Pole Single Throw (SPST) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-455.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 4,620
USD: 28.96
-
EAO Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-453.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 6,700
USD: 42.00
-
EAO Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-451.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 6,750
USD: 42.31
-
EAO Single Pole Double Throw (SPDT) Latching Push Button Switch, IP40, 16 (Dia.)mm, PCB 31-483.036
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 8,550
USD: 53.60
-
EAO Indicator, Faston, Solder Lug Termination, 18mm Mounting Hole Size, IP40 31-051.006
To make a complete indicator you will need the indicator, a lens and a filament lamp or LED. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of lenses see stock numbers ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Indicator - EAO 31 Series. The EAO 31 series of indicators are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. Illumination for the EAO 31 series indicator is via a T1 midget groove filament lamp or single chip LED with a supply voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. The EAO 31 series indicators are available in a choice of square or rectangular bezels. The square indicator (stock number ; 248-5368 248-5368 ) has a 18x18mm bezel while the rectangular indicator (stock number ; 248-5295 248-5295 ) has a 18x24mm bezel. Both versions require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm, the indicators overall depth behind the panel is only 36mm. Universal terminals allow either direct soldering or PCB mounting Self-extinguishing (Polyetherimide) actuator housing material Raised button profile
1 products found
JPY: 3,100
USD: 19.43
-
Yellow Rectangular Push Button Lens for use with 31 Series 31-903.4
All lenses are transparent apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are translucent. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Lenses - EAO 31 Series. A selection of round, square and rectangular lenses in various colours suitable for use with the EAO 31 Series of illuminated push button switches and indicators. Each EAO 31 Series lens has a flat flush profile and is manufactured from Polymethyl Methacrylate. Lenses can be engraved, hot stamped or used with film inserts, apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are not suitable for use with film insert labelling.
1 products found
JPY: 4,650
USD: 29.15
-
Red Square Push Button Lens for use with 31 Series 31-953.2
All lenses are transparent apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are translucent. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Lenses - EAO 31 Series. A selection of round, square and rectangular lenses in various colours suitable for use with the EAO 31 Series of illuminated push button switches and indicators. Each EAO 31 Series lens has a flat flush profile and is manufactured from Polymethyl Methacrylate. Lenses can be engraved, hot stamped or used with film inserts, apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are not suitable for use with film insert labelling.
1 products found
JPY: 4,650
USD: 29.15
-
Green Square Push Button Lens for use with 31 Series 31-953.5
All lenses are transparent apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are translucent. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Lenses - EAO 31 Series. A selection of round, square and rectangular lenses in various colours suitable for use with the EAO 31 Series of illuminated push button switches and indicators. Each EAO 31 Series lens has a flat flush profile and is manufactured from Polymethyl Methacrylate. Lenses can be engraved, hot stamped or used with film inserts, apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are not suitable for use with film insert labelling.
1 products found
JPY: 4,650
USD: 29.15
-
White Square Push Button Lens for use with 31 Series 31-951.9
All lenses are transparent apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are translucent. For the EAO 31 series of push button switches see stock number ; 749-2605 749-2605 typically. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Lenses - EAO 31 Series. A selection of round, square and rectangular lenses in various colours suitable for use with the EAO 31 Series of illuminated push button switches and indicators. Each EAO 31 Series lens has a flat flush profile and is manufactured from Polymethyl Methacrylate. Lenses can be engraved, hot stamped or used with film inserts, apart from the white lenses ; 248-5510 248-5510 and ; 248-5504 248-5504 which are not suitable for use with film insert labelling.
1 products found
JPY: 4,670
USD: 29.27
-
EAO, Red, Twist to Reset 32mm Mushroom Head Emergency Button 84-5030.0020
DIN EN ISO 13850. UL Recognised. Series 84 Low Profile Emergency Stop Switch. The range of 84 was introduced to satisfy demands of both equipment builders and users. Typical usage covers the following areas: machinery and process control equipment, including production lines, cranes, robots, moving platforms, as well as security systems and emergency exists. Within the many different colours, the lenses are available either in plastic or anodised aluminium. To meet modern assembly standards, this range is connected to PCBs. The Series 84 of Low Profile Emergency Stop Swathes are useful for small control panels. If space is at a premium, Series 84 can be easily used as they are portable and compactable. A yellow protection guard is available to stop accidental activation. The Series 84 pushbuttons are suited to a range of industrial applications and guarantee reliable switching even of every light loads. The range requires no additional assembly because of its ‘monoblock ‘design. The double-break switching system can be supplied for the following switching functions: 1 NC, 2 NC, 1 NC + 1 NO. Electrical Characteristics. New standards in emergency-stop switches comply with EN IEC 60947-5-1, EN IEC 60947-5-5 (Emergency-stop), EN ISO13850, EN 60947-5-1. The IEC stands for International Electrotechnical Commission) and is the world ‘s leading organisation for the preparation and publication of International standards for all electrical, electronic and related technologies. Environmental conditions. Operating temperature -25°C … +65°C Storage temperature -25°C … +80°C The front protection is regulated by IP65, which is rated as ‘ ‘dust tight ‘ ‘ and protected against water projected from a nozzle. They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc.) and moisture. The numbers that follow IP each have a specific meaning and they represent the following: First Digit (intrusion protection) Second Digit (moisture protection). Approvals. Approbations UL (Underwriters Laboratories), is a world leader in product safety testing and certification SEV (Swiss Designation)
1 products found
JPY: 10,700
USD: 67.07
-
EAO, Red, Twist to Reset 32mm Mushroom Head Emergency Button 84-5031.2B20
DIN EN ISO 13850. UL Recognised. Series 84 Low Profile Emergency Stop Switch. The range of 84 was introduced to satisfy demands of both equipment builders and users. Typical usage covers the following areas: machinery and process control equipment, including production lines, cranes, robots, moving platforms, as well as security systems and emergency exists. Within the many different colours, the lenses are available either in plastic or anodised aluminium. To meet modern assembly standards, this range is connected to PCBs. The Series 84 of Low Profile Emergency Stop Swathes are useful for small control panels. If space is at a premium, Series 84 can be easily used as they are portable and compactable. A yellow protection guard is available to stop accidental activation. The Series 84 pushbuttons are suited to a range of industrial applications and guarantee reliable switching even of every light loads. The range requires no additional assembly because of its ‘monoblock ‘design. The double-break switching system can be supplied for the following switching functions: 1 NC, 2 NC, 1 NC + 1 NO. Electrical Characteristics. New standards in emergency-stop switches comply with EN IEC 60947-5-1, EN IEC 60947-5-5 (Emergency-stop), EN ISO13850, EN 60947-5-1. The IEC stands for International Electrotechnical Commission) and is the world ‘s leading organisation for the preparation and publication of International standards for all electrical, electronic and related technologies. Environmental conditions. Operating temperature -25°C … +65°C Storage temperature -25°C … +80°C The front protection is regulated by IP65, which is rated as ‘ ‘dust tight ‘ ‘ and protected against water projected from a nozzle. They are used to define levels of sealing effectiveness of electrical enclosures against intrusion from foreign bodies (tools, dirt etc.) and moisture. The numbers that follow IP each have a specific meaning and they represent the following: First Digit (intrusion protection) Second Digit (moisture protection). Approvals. Approbations UL (Underwriters Laboratories), is a world leader in product safety testing and certification SEV (Swiss Designation)
1 products found
JPY: 14,800
USD: 92.77
-
EAO 14 Push Button Enclosure 14-040.005+704.600.1
To obtain IP 67 front end use Marking plate contained in lenses set see stock number ; 6906777 6906777. The status of a maintained action switch can be determined by the position of the lens. Push Button Switches Series 14. The 14 series has been designed to offer premium quality with a wide range of options available. These include push buttons, indicators, various lens colours, covers and bezels. Switches and Indicators supplied with raised bezel Raised Mounting into 22.5 mm cut out Flush mounting into 30.5 mm cut out Illumination using T5.5 Lamps or LED ‘s All standard lenses are transparent with translucent diffuser Solder, plug-in or PCB connections Operating temperature range: -25 to +55 °C
1 products found
JPY: 7,200
USD: 45.13
-
EAO Single Pole Single Throw (SPST) Momentary Push Button Switch, IP40, 8 (Dia.)mm, Panel Mount 19-139.015
Illuminated versions require a T1 bi-pin filament lamp or LED, see typically stock no's ; 6559491 6559491. 9 mm Round ; Square Illuminated Switches. The pushbuttons are fitted with snap-action or low-level switching systems Mounting from the front through the mounting hole is assured even when the wiring has already been attached The units are equipped with soldering/plug-in terminals
1 products found
JPY: 3,760
USD: 23.57
-
EAO Single Pole Single Throw (SPST) Latching Push Button Switch, IP40, 8 (Dia.)mm, Panel Mount 19-471.035
Illuminated versions require a T1 bi-pin filament lamp or LED, see typically stock no's ; 6559491 6559491. 9 mm Round ; Square Illuminated Switches. The pushbuttons are fitted with snap-action or low-level switching systems Mounting from the front through the mounting hole is assured even when the wiring has already been attached The units are equipped with soldering/plug-in terminals
1 products found
JPY: 4,070
USD: 25.51
-
Illuminated Push Button Switch, IP40, Panel Mount, Latching for use with Series 31 -25°C +55°C 31-261.0252
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 11,200
USD: 70.21
-
EAO Red Mushroom Push Button, DPST-2NC, 16mm Maintained PCB Pin 51-259.025
ENEC (EN61058-1), CSA, CB. EAO Stop Switches, Series 51. EAO Stop Switch, Series 51 is a compact design stop switch with less than 19mm back panel depth. The Series 51 Stop Switch utilises a mono block design with an integral switch which minimises the back panel depth and offers an extremely rugged construction that protects the switch from damage. The series 51 Stop Switch has been tested beyond 100,000 actuations. Typical switch applications include medical diagnostic equipment, machine and process controls, hand held terminals, supermarket checkouts and many others. Back panel depth of only 18.8 mm Visible actuation status, twist to release Attractive and ergonomic design Protected to IP65 from the front
1 products found
JPY: 7,660
USD: 48.02
-
EAO Red Mushroom Push Button, NO/NC, 16mm Maintained PCB Pin 51-253.022
ENEC (EN61058-1), CSA, CB. EAO Stop Switches, Series 51. EAO Stop Switch, Series 51 is a compact design stop switch with less than 19mm back panel depth. The Series 51 Stop Switch utilises a mono block design with an integral switch which minimises the back panel depth and offers an extremely rugged construction that protects the switch from damage. The series 51 Stop Switch has been tested beyond 100,000 actuations. Typical switch applications include medical diagnostic equipment, machine and process controls, hand held terminals, supermarket checkouts and many others. Back panel depth of only 18.8 mm Visible actuation status, twist to release Attractive and ergonomic design Protected to IP65 from the front
1 products found
JPY: 7,530
USD: 47.20
-
EAO Single Pole Double Throw (SPDT) Momentary Push Button Switch, IP40, 16 (Dia.)mm, Panel Mount, 42V ac/dc 31-131.0252
EN 61058. To make a complete illuminated switch you will need the switch, a lens and a filament lamp or LED. For the EAO 31 series of indicators see stock number ; 248-5368 248-5368 typically. For the EAO 31 series of lenses see stock numbers ; 749-2611 749-2611 or ; 248-5425 248-5425 or ; 248-5374 248-5374 typically. For the EAO 31 series tool kit see stock number ; 248-5481 248-5481. For a suitable filament lamp see stock number ; 655-9211 655-9211 typically. For a suitable white single chip LED see stock number ; 225-997 225-997 typically. Illuminated Push Button Switch - EAO 31 Series. The EAO 31 series of illuminated push button switches are suitable for use in many Human Machine Interface (HMI) panel mounting applications including Process Control, Panel Building, Machinery and Instrumentation. The illuminated push button switches are available in a choice of round (18mm diameter), square (18x18mm) or rectangular (18x24mm) bezels with snap action or low level switching elements with momentary or maintained switching actions. The snap action switching element is a self-cleaning, double-break, snap action system with solder terminals, while the low level switching element is designed for switching low power loads in electronic circuits ranging from 10μA at 100μV up to 100mA at 42Vac/dc, termination is via universal terminals that allow either direct soldering or PCB mounting. Illumination for the EAO 31 series of push button switches is via a T1 midget groove filament lamp or single chip LED with a voltage of between 6 and 48V. For supply voltages above 48V, it is necessary to use an external series resistor. All EAO 31 series of illuminated push button switches require a 16mm panel cut out and are suitable for panels with a thickness of between 1.5 and 6mm. They have a long life, short rebound time and a stable contact resistance. Various configurations available including low level or snap action elements, momentary or maintained switching actions and normally closed or normally open contacts Raised button profile Self-extinguishing switch and actuator housing material Class II compliant Electric strength 2500Vac 50Hz for 1 minute between all terminals and earth, as per IEC 60512-2-11
1 products found
JPY: 8,980
USD: 56.29
-
EAO Single Pole Single Throw (SPST) Momentary Yellow LED Push Button Switch, IP67, 22.5 (Dia.)mm, Panel Mount, 24V dc K84-603.4709S
Full Face Flush Illuminated Switch. Brought to you by EAO, this selection of illuminated push-button switches feature full-face, high brightness LED illumination. Low profile with a flush fitting, these illuminated switches also assure a high degree of environmental protection. Features and Benefits:. IP rating: IP67 Contact rating: 200mA @ 42Vac/dc (Max. power 2W) Low profile switch; 2mm high Depth behind panel: 31mm LED Voltage: 24V dc Gold plated N/O contacts
1 products found
JPY: 11,300
USD: 70.83
-
EAO Single Pole Single Throw (SPST) Momentary Yellow LED Push Button Switch, IP67, 22.5 (Dia.)mm, Panel Mount, 24V dc K84-603.4609
Full Face Flush Illuminated Switch. Brought to you by EAO, this selection of illuminated push-button switches feature full-face, high brightness LED illumination. Low profile with a flush fitting, these illuminated switches also assure a high degree of environmental protection. Features and Benefits:. IP rating: IP67 Contact rating: 200mA @ 42Vac/dc (Max. power 2W) Low profile switch; 2mm high Depth behind panel: 31mm LED Voltage: 24V dc Gold plated N/O contacts
1 products found
JPY: 8,360
USD: 52.40
-
EAO Twist Release Stop Push Button Switch, IP65, 22.5 (Dia.)mm, Panel Mount 704.064.2
EAO 04 Series Stop Switch and Accessories. From EAO, the 04 Series of Twist release stop-switches are designed to prevent "teasing" of the actuator which can result in premature contact operation. The design also eliminates the possibility of the push button action being blocked by lodged foreign bodies. The actuator requires a contact block to complete the switch, see stock no ; 7874729 7874729. For a suitable protective shroud see stock no ; 7874722 7874722. 22.5mm panel cut out diameter Arrow markings on button face Front protection IP65
1 products found
JPY: 8,110
USD: 50.84
-
Push Button for use with Stop Switches EUK-704.927.4
EAO 04 Series Stop Switch and Accessories. From EAO, the 04 Series of Twist release stop-switches are designed to prevent "teasing" of the actuator which can result in premature contact operation. The design also eliminates the possibility of the push button action being blocked by lodged foreign bodies. The actuator requires a contact block to complete the switch, see stock no ; 7874729 7874729. For a suitable protective shroud see stock no ; 7874722 7874722. 22.5mm panel cut out diameter Arrow markings on button face Front protection IP65
1 products found
JPY: 8,720
USD: 54.66
-
Push Button for use with Stop Switches EUK-61-9965
DIN EN ISO 13850; EN 60205-1. EAO Emergency Stop, Series 61. The EAO Series 61 is a high quality, modular switch range that includes pushbuttons, indicators, selector switches, keylock switches and Emergency-stop. Available in raised or flush mount. Arrow marking showing twist to unlock release Front protection IP65 Switching; 5A @ 250Vac Slow make switching element 16mm mounting hole
1 products found
JPY: 12,000
USD: 75.22
