[SKF]Test & Measurement
Filters
-
SKF Non Contact Voltage Detector TKED 1
SKF TKED1 Non-Contact Electrical Discharge Detector. (EDD Pen). Electrical erosion, lubricant degradation and bearing failure are often caused by electrical discharges as a result of motor shaft voltages discharging through a bearing. The TKED1 has been uniquely and specifically designed to detect these discharges safely, protecting the user whilst a motor or machinery is in motion. No special training is needed to use the detector and no touching of machinery is required. The EDD pen comes with an LED back lit screen which assists users in dark environments, it also features an antenna and ergonomic grip. Capable of detecting discharges on a time base of 10 seconds, 30 seconds or indefinite, this device can significantly prevent unplanned machinery downtime. Features and Benefits:. 50 MHz to 200 MHz frequency range Remote solution, works at a distance LED Backlit screen IP55 for use in most industrial environments. How do non-contact voltage testers work?. Also known as a voltage detector, voltage tester pens, sensors or test pens. They allow the user to test electrical conductors without touching them. Non-contact testers are the safest and easiest way to detect electric fields or voltage. Voltage testers utilise what is called capacitive coupling, the user holding the instrument provides a ground reference. The tester then detects changing electric field around the object or objects conducting an AC current. (Alternating current) Simply put, the user and the tester pen when near the electrical conductor will cause a small current to flow through the tester from the source, this is how it detects AC voltage.
1 products found
JPY: 176,000
USD: 1,095.07
-
SKF TKBA 40 Laser Alignment Tool, 632nm Laser wavelength, Outdoor TKBA 40
SKF - TKBA Laser Belt Alignment Tools. Drive belt and pulley misalignment can significantly contribute to noise, vibration, bearing and pulley wear leading to premature bearing failure and costly machine downtime. SKFs Laser Belt Alignment Tools provide faster and more accurate alignment over traditional methods. Increasing bearing life, reducing noise, vibration and minimising wear on pulleys and belts. You can now align all belt drives with just one tool. Features and Benefits. ;Powerful magnets allow fast and easy attachment ;Facilitates simultaneous adjustment of tension and alignment. TKBA 10 & TKBA 20. The TKBA 10 and TBKA 20 series of Belt Alignment Tools offer fast accurate laser alignment of pulleys and sprockets. Using powerful magnets to hold firmly to the pulleys side face, the transmitter projects a line to the receiver (mounted on the opposite pulley). Various indicator lines on the receiver give an immediate visual indication of any offset or misalignment with the belt. The line reflected back to the transmitter showing any horizontal misalignment between the two pulleys. ;Can be used on almost all machines using V belts, ribbed belts as well as chain sprockets ;TKBA 10 utilises a red laser and used for distances up to 3 metres ;TKBA 20 utilises a highly visible green laser and used for distances up to 6 metres and can be used in sunny conditions ;Sturdy aluminium housings ensuring stability and accuracy during the alignment process. TKBA 40. The TBKA 40 Laser Belt Alignment Tool aligns the pulleys V grooves not the side face, providing the most accurate horizontal, vertical and parallel belt alignment. Groove alignment also allows pulleys with differing faces or widths to be aligned with greater confidence. Attached to the pulley using magnets with V guides to aid accurate placement. ;Three-dimensional target area simplifies the alignment process ;V-guides facilitate the alignment of a wide range of V-belt pulleys ;Aligns grooves of a V-belt pulley rather than its face ;Maximum operating distance of 6 metres
1 products found
JPY: 586,000
USD: 3,646.09
-
［Discontinued］SKF TKBA 20 Laser Alignment Tool, 532nm Laser wavelength, Outdoor TKBA 20
SKF - TKBA Laser Belt Alignment Tools. Drive belt and pulley misalignment can significantly contribute to noise, vibration, bearing and pulley wear leading to premature bearing failure and costly machine downtime. SKFs Laser Belt Alignment Tools provide faster and more accurate alignment over traditional methods. Increasing bearing life, reducing noise, vibration and minimising wear on pulleys and belts. You can now align all belt drives with just one tool. Features and Benefits. ;Powerful magnets allow fast and easy attachment ;Facilitates simultaneous adjustment of tension and alignment. TKBA 10 & TKBA 20. The TKBA 10 and TBKA 20 series of Belt Alignment Tools offer fast accurate laser alignment of pulleys and sprockets. Using powerful magnets to hold firmly to the pulleys side face, the transmitter projects a line to the receiver (mounted on the opposite pulley). Various indicator lines on the receiver give an immediate visual indication of any offset or misalignment with the belt. The line reflected back to the transmitter showing any horizontal misalignment between the two pulleys. ;Can be used on almost all machines using V belts, ribbed belts as well as chain sprockets ;TKBA 10 utilises a red laser and used for distances up to 3 metres ;TKBA 20 utilises a highly visible green laser and used for distances up to 6 metres and can be used in sunny conditions ;Sturdy aluminium housings ensuring stability and accuracy during the alignment process. TKBA 40. The TBKA 40 Laser Belt Alignment Tool aligns the pulleys V grooves not the side face, providing the most accurate horizontal, vertical and parallel belt alignment. Groove alignment also allows pulleys with differing faces or widths to be aligned with greater confidence. Attached to the pulley using magnets with V guides to aid accurate placement. ;Three-dimensional target area simplifies the alignment process ;V-guides facilitate the alignment of a wide range of V-belt pulleys ;Aligns grooves of a V-belt pulley rather than its face ;Maximum operating distance of 6 metres
1 products found
JPY: 229,320
USD: 1,426.83
