絞り込み条件
全て解除
解除
Electronics Components, Power & Connectors[355]
Electrical, Automation & Cables[663]
RS Components[932]
Sort by:
Schurter
ASE, VDE, SEMKO, UL, CSA. Fuse-holders. Schurter fuse holders are ideal for use in both industrial and household applications where the product will be unattended for periods of time. Used in conjunction with Schurter fuses they offer first rate protection. Schurter fuse holders are subjected to glow wire testing to ensure that they are safe to withstand high temperatures. 5 x 20 mm. sets of fuse-holders. Suitable for mounting on PCBs. Covers available separately.
1 products found
JPY: 2,220
USD: 13.93
NF C 93-435 (HA 81), CCQ, GAM T1, LNZ listed. 172321 series fuses. Axial component fuses designed for direct solder mounting on PCB. Fast-acting 2.3 x 8 mm fuses. High breaking capacity. Ceramic tube with clear insulating sleeve.
JPY: 2,730
USD: 17.13
JPY: 3,040
USD: 19.07
CEI 257, CSA, UL. OG type jaw fuse holder. For 5 x 20 and 6.3 x 32 mm fuses. Suitable for mounting on PCBs.
JPY: 1,070
USD: 6.71
CEI 127 sheet II list LNZ, SEMKO, NNO. Schurter FSF series fast-acting fuse. Schurter FST series cartridge fuses are a miniature fuse that is a fast acting non-resettable fuse.The fuse has a glass body with nickel plated alloy end caps. These fuses are quick acting fuses with an F speed rating. Features Quick acting fuses. size 5 x 20 mm. Low breaking capacity. Glass cartridge, protected terminals. More Information: Why choose a glass fuse? Glass and ceramic fuses have similar properties. However you may choose a glass fuse as it enables you to see the inside of the fuse. Therefore it is easier to determine whether the fuse has blown. What size is it? 5x20 mm is a standard cartridge size and it measures approximately 20 mm long by 5 mm in diameter. They are popular in board and panel protection and will fit a compatible 5x20 fuse holder. What Speed is it? This particular fuse is F speed rated which means it is a fast acting fuse, fast-acting fuses are used to protect cabling from melting or catching fire when an overload happens. These fuses are used on less sensitive components. Fast -acting fuses are the most common type of fuse. What is Breaking Capacity? Breaking capacity is the level of current that the fuse can safely handle without exploding or rupturing. The breaking capacity of your fuse should be greater than the fault current of your electronic circuit. This particular fuse is LBC (Low Breaking Capacity). Standards - IEC 60127-2/3 - UL 248-14 - CSA C22.2 no. 248.14 Approvals - VDE ; UL Applications Industrial ; Safety
JPY: 5,330
USD: 33.43
SP Series. Professional range of Schurter fuses from the SP series. The fuses are available in a variety of current ratings. Pigtail Type Nickle Plated Copper Alloy endcaps Ceramic Cylindrical Mounting Style - Holder/Clip
JPY: 1,560
USD: 9.79
JPY: 2,120
USD: 13.30
JPY: 1,290
USD: 8.09
EN 60127, IEC 127-3//3, DIN-VDE 0820. Microfuse fuses - MSF and MST series. Miniature fuses for soldering onto PCB or carriers. Fast-acting (MSF) or time-delay (MST) fuses. Low breaking capacity.
JPY: 2,040
USD: 12.80
JPY: 1,450
USD: 9.10
JPY: 1,820
USD: 11.42
Membrane. Product Description The MCS 18 range of switches from Schurter offer unique mechanical switches with great tactile feedback. The MCS 18 offers a low profile design and easy snap mounting with IP 65 rating to the front of the switch.. Features and benefits Small mounting depth. Long life. Great tactile feel. An optional sealing kit (stock no. ; 301-5241 301-5241 ) available for IP65 rating
JPY: 1,750
USD: 10.98
Membrane Product Description Schurter MCS 18 series switches are unique mechanical switches with a superior operating feel.
JPY: 1,010
USD: 6.34
UL Recognised; UL Recognised for Canada. 'SCHURTER' Dual Size Fuseholders, OGD. Impossible to have both size fuse-links installed at the same time Insulation walls reduce the risk of electric shock Kicked PCB-terminals, tin-plated for optimised soldering on PCB Clip-ends prevent axial fuse-link movement First fuse 6.3 x 32 mm, second fuse 5 x 20 mm
JPY: 4,350
USD: 27.29
UL recognised, CSA certified. 'SCHURTER' Base Mount Fuseholder. M3 fixing screw aperture A transparent cover which stops accidental contact with live parts is available separately Max. power loss of 3.2W at 23°C
JPY: 2,670
USD: 16.75
UL ; CSA (16A/250V), VDE ; SEMKO (10A/250V). 'SCHURTER' Bayonet Cap, Series FPG3. Terminals 4·8x0·5mm Sealed from the rear Thermoplastic Body Protection: PC2
JPY: 3,610
USD: 22.65
UL recognised component, CSA certified. Fast Acting Miniature Fuses. Excellent I ;sup>2 ;/sup>t values Suitable for all SMD soldering processes Fuseholder type OHM63 (stock-no. ; 167-5194 167-5194 ) must be ordered separately
'SCHURTER' Fuse Clips, Dual Standard. Parallel legged fuse clips Straight terminals First fuse 6.3 x 32 mm, second fuse 5 x 20 mm.
JPY: 3,190
USD: 20.01
For use in equipment according to IEC/UL 60950. Medical versions are suitable for use in medical equipment according to IEC/UL 60601-1. DC12 Series. The DC12 series of power entry modules from Schurter are a high performance IEC inlet with line filter and line switch. The DC12 inlets are equipped with a 'V-Lock' notch intended for use with the latching cordset. These IEC filters have a compact design and are available in white or black. The DC 12 series has a switch for high inrush current. Features and Benefits:. Different mounting options available - screw on from front or rear and snap-in from front. Rear side mounting enables an efficient, cost saving assembly. 6.3 x 0.8 mm quick connect terminals. Line switch. Compact size. Excellent shielding. Single elements are already wired. Standard and medical versions are available. Illuminated and non-illuminated line switch options. Available in black or white. Product Applications:. DC12 power entry modules are suitable for applications with high transient loads. These IEC inlets can be used for appliance inlet protection (Class I or II), a 1 or 2 pole line switch or as a line filter for standard or medical applications.
JPY: 5,150
USD: 32.31
JPY: 6,840
USD: 42.91
UL, CSA, VDE, SEV and IEC/EN. EEC 22 male panel mount sockets, 6100-3 series. These male mounting brackets for panel mounting are secured using two self-tapping screws (not supplied). 3 versions available: solder lugs (3.5 x 0.8 mm) and Faston terminals (4.8 x 0.8 mm or 6.3 x 0.8 mm). Panel mounted with 8 mm maximum thickness. C14 type connector. RS Article ; 8702341 8702341 offers IP 54 protection.
JPY: 260
USD: 1.63
JPY: 300
USD: 1.88
5 x 20 and 6.3 x 32 Fuse holders - OGD-SMD Type. Bases (0031.8241) for 5 x 20 mm and 6.3 x 32 mm fuses. Surface mount version. Insulated to reduce electrical risks. Protective housing (0853.0917) available separately.
JPY: 1,880
USD: 11.79
IEC, UL, CSA. Fast Acting Miniature Fuses, 3.2 x 1.6mm. 3.2 x 1.6 mm package Ceramic body, tin plated copper alloy ends Fast acting
JPY: 1,740
USD: 10.92
JPY: 1,500
USD: 9.41
UL 248-14, CSA C22.2 no. 248.14. UL Recognised. Schurter UST Fuses. Schurter UST 1206 suface mount fuses offer secondary protections for both DC and AC applications. Ideally suitable for circuits with inrush also LCD backlight DC-AC inverter. High melting I²t-values Slow Blow
JPY: 1,110
USD: 6.96
JPY: 960
USD: 6.02
JPY: 1,380
USD: 8.66
Schurter Fuseholder Clips. Professional range of Schurter fuse clips designed for 20 and 32A applications.Heavy duty fuse clips, the fuse clips offer minimal power dissipation due to high clamping force. Applications include: Photovoltaic applications. Inverters. Battery charge contollers. String fuse holders. DC applications. Solder terminals and Screw Terminals
JPY: 1,680
USD: 10.54
Schurter In Line Fuseholder. Schurter PC2 Inline Fuseholders has integral protection against electric shock. Live part is not accessible when the fuseholder is closed, after the fuse carrier (incl. fuse-link) has been removed, either during insertion or removal of the fuse carrier (incl. fuse-link). Compliance is checked by using the standard test finger specified in IEC 60529. Automotive applications/aftermarket Audio aftermarket Lighting aftermarket
JPY: 3,870
USD: 24.28
JPY: 5,220
USD: 32.74
ENEC, UL, CSA. Point illuminated types require suitable series resistor; Ring illuminated types incorporate resistors for 24Vdc operation. Anti-Vandal M19 ; M22 Push Button Switches - MSM LA Series (Latching). Robust pushbutton switch suitable for use in harsh environments - IK07 shock resistance (DIN EN 50102) IP64 sealed stainless steel housing and latching (push-on, push-off) actuator Actuator with 10N operating force and 4.5mm travel - protrudes 3.7mm above panel in off state Quick connect terminals Long life - up to 150,000 mechanical operations Non-illuminated or red, green or blue LED point or ring illuminated versions, available in 19 or 22mm Ø panel cut outs Switching status optically visible - illuminated viewing angle of 180°
JPY: 8,990
USD: 56.39
JPY: 8,720
USD: 54.70
Schurter 1000Vdc Photovoltaic Fuses and Accessories. ASO series fuses and FSO series fuseholders designed to protect DC applications from the potentially devastating effects of low short circuits and overvoltage conditions. The fuse and fuseholder are for use in grid or off-grid solar strings, inverters, battery charges and combiner boxes.
JPY: 3,930
USD: 24.65
JPY: 4,030
USD: 25.28
Schurter FSF Quick-Acting F 5x20mm Fuses. Schurter FSF fuses are a dependable primary protection device for use in a wide range of applications. The glass body allows for quick identification of incidents and thus allows for quick and easy replacements. Schurter quick-acting fuses are useful when looking to protect particularly sensitive equipment.
JPY: 1,630
USD: 10.23
JPY: 1,020
USD: 6.40
