[RS PRO]Development And Prototyping Support Product
Filters
-
Breadboard Prototyping Board 80 x 60 x 10mm 102-9147
Breadboard, KH -102 Development System
A practical board for experimental setup and prototyping.1 products found
JPY: 3,770
USD: 23.63
-
RS PRO M3 x 0.5 Female Steel Rod End, 3mm Bore, 27mm Long, Metric Thread Standard 382-295
Rod End Miniature - Female - C22/C35 Pb Steel, Mechanical Link Hardened Ball Manufactured by Galvanizing (Passivation), Grinding and Polishing 100 cr6 Ball Bearing Steel Insert is Cu Zn 40 Mn Pb Bronze. These bearings require lubricating oil and the Molykote BR2 has an eccentric operation of +/- 13° out of 360° filled at the time of shipment
1 products found
JPY: 14,800
USD: 92.77
-
Carbide PCB Drill Bit 0.8mm 457-572
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 840
USD: 5.27
-
Carbide PCB Drill Bit 0.5mm 457-594
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,180
USD: 26.20
-
Steel PCB Drill Bit 0.9mm 457-598
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 5,540
USD: 34.73
-
Steel PCB Drill Bit 0.8mm 457-651
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 6,010
USD: 37.67
-
Carbide PCB Drill Bit 1mm 457-655
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,160
USD: 26.08
-
Carbide PCB Drill Bit 1.5mm 457-661
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 4,150
USD: 26.01
-
Fibreglass Brush (Bristle) Bristle Fireglass Brush, 4mm Diameter 514-868
Cleaning Brush
This is a very useful tool for cleaning components such as boards, battery contacts, fixtures, and tight spaces.1 products found
JPY: 5,070
USD: 31.78
-
Fibreglass Brush (Bristle) Bristle Fireglass Brush, 4mm Diameter 514-874
Cleaning Brush
This is a very useful tool for cleaning components such as boards, battery contacts, fixtures, and tight spaces.1 products found
JPY: 5,520
USD: 34.60
-
Fibreglass Brush (Bristle) Bristle PCB and Flux Brush, 4mm Diameter 514-880
Cleaning Brush
This is a very useful tool for cleaning components such as boards, battery contacts, fixtures, and tight spaces.1 products found
JPY: 8,450
USD: 52.97
-
Manual Wire Wrapping Tool 30AWG 605-239
For appropriate wire wrapping see part number < 209-4798') 209-4798/
Stripping, wrapping and unwrapping tools1 products found
JPY: 16,500
USD: 103.43
-
Manual Wire Wrapping Tool 26AWG 606-311
For appropriate wire wrapping see part number < 209-4798') 209-4798/
Stripping, wrapping and unwrapping tools1 products found
JPY: 25,800
USD: 161.73
-
Double Sided DIN 41612 Matrix Board FR2 with 34 x 64 1.02mm Holes, 2.54 x 2.54mm Pitch, 160 x 100mm 100-4340
Copper Free Board
Drilled boards are designed for analog circuit prototype development.1 products found
JPY: 3,050
USD: 19.12
-
RS PRO 3mm High Polyamide Round Spacer 102-6205
Spacers, Plastics
Spacers using integral bores1 products found
JPY: 2,300
USD: 14.42
-
Breadboard Prototyping Board 240 x 195 x 21mm 102-9169
The board comes with a socket and a terminal binding post.
Breadboard Development System1 products found
JPY: 17,500
USD: 109.70
-
Double Sided DIN 41612 Matrix Board FR4 with 1.02mm Holes 2.54 x 2.54mm Pitch, 233.4 x 220mm 110-2517
Square Pads and Metal Foil Laminate Holes
Metal foil laminates allow you to place wires in the same hole as the tail of the component to ensure a reliable solder connection.1 products found
JPY: 31,100
USD: 194.95
-
Breadboard Prototyping Board 114.3 x 156.21 x 1.6mm 159-6192
DIP Breadboards. A range of low density boards designed for wiring integrated circuits. The 0 V and Vdc power supply lines are repeated on the component side of the board, increasing the distribution capacity. The contacts are replaced by individual pads designed to take connection plugs.
1 products found
JPY: 19,400
USD: 121.61
-
96 Way Double Sided DIN 41612 Extender Board Adapter Extender board FR4 281.6 x 100 x 1.6mm 159-6300
Eurocard extensions. Range of extensions for testing single- or double-height Eurocards, depth 160 or 220 mm, with type B or C DIN 41612 connectors. The ejector mechanism situated at the front supports the board under test. The board circuits are thus entirely clear of the chassis, considerably facilitating their inspection and verification. To facilitate fixing of oscilloscope probes, the extension boards can be fitted with terminals (single boards are supplied with 20terminals and doubles with 40). This option is not available on extensions with 96 // 96 contacts.
1 products found
JPY: 62,500
USD: 391.78
-
Single Sided DIN 41612 Matrix Board FR2 with 1.02mm Holes 2.54 x 2.54mm Pitch, 220 x 100mm 159-6322
Economic Eurocard. The economical development board, designed for wire-to-wire connection of discreet components. This board is very well suited to applications where there is a large number of common buses or signal lines. Thanks to the APW cutter (stock number ; 543-535 543-535 ) used to cut tracks upon request, circuit production is very fast.
1 products found
JPY: 4,650
USD: 29.15
-
Single-Sided Stripboard FR-2 454.66 x 119.38 x 1.6mm FR1 195-1094
Single-sided Veroboard® boards. Ideal for development and prototype work, Veroboard is intended primarily for wiring discreet components, particularly in analogue circuits.It is also useful when there is a large number of buses or common signals. The basic principle of Veroboard entails arranging components so that they are electrically connected by predetermined copper tracks. The tracks may be cut to suit, usinga cutter (stock number ; 543-535 543-535 ) or by drilling holes. A complete range of plugs is available for use with Veroboard.
1 products found
JPY: 11,000
USD: 68.95
-
RS PRO M6 x 1 Female Steel Rod End, 6mm Bore Size, 39mm Long , M6 x 1 Thread Size, Metric Thread Standard Female 198-8951
Female Rod End Bearing. Corrosion-resistant galvanised Zinc coating
1 products found
JPY: 1,790
USD: 11.22
-
RS PRO M12 x 1.75 Female Steel Rod End, 12mm Bore Size, 65mm Long , M12 x 1.75 Thread Size, Metric Thread Standard 198-8995
Rod End - Female. Suitable for pneumatic cylinders and coupler mechanisms in the fields of printing and packing machines, filling plants, labelling machines and mechanical controls. Maintenance free - do not require lubrication
1 products found
JPY: 2,690
USD: 16.86
-
RS PRO M10 x 1.5 Male Steel Rod End, 10mm Bore Size, 61mm Long , M10 x 1.5 Thread Size, Metric Thread Standard Male 198-9099
Rod End - Male. Suitable for pneumatic cylinders and coupler mechanisms in the fields of printing and packing machines, filling plants, labelling machines and mechanical controls. Maintenance free - do not require lubrication
1 products found
JPY: 2,470
USD: 15.48
-
RS PRO M12 x 1.75 Male Steel Rod End, 12mm Bore Size, 69mm Long , M12 x 1.75 Thread Size, Metric Thread Standard Male 198-9106
Rod End - Male. Suitable for pneumatic cylinders and coupler mechanisms in the fields of printing and packing machines, filling plants, labelling machines and mechanical controls. Maintenance free - do not require lubrication
1 products found
JPY: 2,860
USD: 17.93
-
Breadboard Prototyping Board 201 x 64 x 18.5mm 210-4542
Board includes socket and terminal binding posts. Breadboards, KH – 204 Development System. A practical breadboard is a great tool for experimental setups and prototypes to test circuits. RS offers a choice of boards and accessory kits to suit your needs. Switches can be implemented and / or changed quickly and easily. Connection option for 4mm plugs using two integrated terminal binding posts (red and black).
1 products found
JPY: 12,600
USD: 78.98
-
PCB Cleaning Scrub Block (40 x 30 x 19mm) 216-2706
PCB Cleaning Scrub Block. This fine grained non-metallic abrasive in an elastic binding agent is for dry cleaning or polishing copper laminates prior to printing or processing Effective in cleaning metal contact areas on switches, relays, connectors etc.
1 products found
JPY: 1,540
USD: 9.65
-
Natural Bristle PCB and Flux Brush, 229-9690
PCB Cleaning Brushes. Fine, natural bristle brushes with wooden handles, suitable for many applications, including applying liquid treatments to PCBs and removing solder flux
1 products found
JPY: 4,440
USD: 27.83
-
Natural Bristle PCB and Flux Brush, 34 x 15mm 11.6mm Diameter 229-9735
PCB Cleaning Brushes. Fine, natural bristle brushes with wooden handles, suitable for many applications, including applying liquid treatments to PCBs and removing solder flux
1 products found
JPY: 2,640
USD: 16.55
-
Laser Artwork Film A4 286-6773
LaserStar Translucent Laser Film. A specially formulated translucent film for the production of high resolution PCB artworks directly from any Laser printer. LaserStar has a 75 micron base with a special coating for high resolution keying and fixing of toner enabling crisp dense artworks to be produced. The film will also accept copier toner enabling usable artworks to be produced from pre-printed originals. For the production of high-resolution PCB and design artworks through any laser printer Produces crisp dense artworks 75 micron translucent film Special coating for high resolution keying and fixing of toner Also accepts copier toner
1 products found
JPY: 3,210
USD: 20.12
-
RS PRO M16 x 1.5 Female Steel Rod End, 16mm Bore Size, 85mm Long , M16 x 1.5 Thread Size, Metric Thread Standard Female 303-4040
Cylinder Accessories
1 products found
JPY: 11,600
USD: 72.71
-
［Discontinued］Carbide PCB Drill Bit 0.5mm 457-582
Tungsten Carbide Drill
Small and Sturdy Tungsten Carbide Drill Bit, Can be Used in Combination with PCB Drill 2 Types of Straight Shank and Shoulder Shank (Shoulder Shank is an O3.2 Shank) Multilayer Type or Standard Circuit Board Firmly Perforated1 products found
JPY: 510
USD: 3.20
-
［Discontinued］Steel PCB Drill Bit 1mm 457-617
HSS, Polishing Shank Drill
Small twist drill bit drill made of HSS for PCB drill, shank diameter is 2.35 mm, well perforated multilayer substrate1 products found
JPY: 1,530
USD: 9.59
-
［Discontinued］PCB Rack 270 x 210 x 96mm 555-601
Substrate Rack
A white polypropylene molding rack that can be used to drain or dry the substrate after pretreatment, or to store the substrate during assembly or after it has been completed. There is a drain slot in the inner groove.1 products found
JPY: 8,500
USD: 53.28
-
［Discontinued］12.7mm High Nylon Locking PCB Support Pillar With 3.85mm PCB Hole and 3.85mm Chassis Hole 580-045
Printed board laminated pillar
1 products found
JPY: 330
USD: 2.07
-
［Discontinued］Matrix Board FR2 with 1.02mm Holes 2.54 x 2.54mm Pitch, 454.66 x 95.1mm 100-4154
KM6 Veroboard (R) Board for DIN41612 Connectors
Combining the advantages of Veroboard with the flexibility of Eurocard and DIN41612 connectors for single-sided board wire wrapping applications, this double-height (2 stacked) board with 3.81 mm spacing aligns boards to the grid of adjacent connectors.1 products found
JPY: 1,790
USD: 11.22
-
［Discontinued］RS PRO M10 x 1.5 Female Steel Rod End, 10mm Bore Size, 56mm Long , M10 x 1.5 Thread Size, Metric Thread Standard Female 198-8973
Rod End - Female. Suitable for pneumatic cylinders and coupler mechanisms in the fields of printing and packing machines, filling plants, labelling machines and mechanical controls. Maintenance free - do not require lubrication
1 products found
JPY: 1,430
USD: 8.96
