RS PRO

RS PRO Multimeter Leads Fused Probe Kit, Fused, CAT III 1000V　204-599

Light angle versions are not recommended for use with Megger BM100, BM101, Thurlby 1905, 1503, Fluke 8010, 8050, Wavetek DM25XL, DM93, DM98, AVO 8, AVO 2001, or ITT MX112 multimeters.
For these models, the straight version is preferable.

RS PRO

RS PRO Crocodile Clip　218-100

RS Pro Screw In Crocodile Clips 600 V CAT III
RS Pro Screw In Crocodile Clips 600 V CAT III

RS PRO

RS PRO Test Stand　111-3692

RS Pro Force Gauge Tester Stand
The RS Pro Force Gauge Tester Stand is designed for use with RS Pro digital force gauges.

RS PRO

RS PRO ICA3000 Current Clamp, 170mm　123-2199

EN61010-1 Cat III, 600 V
Owner's Manual, AA Alkaline Battery (x 2)

RS PRO

RS PRO Multimeter Current Clamp Adapter AC, 400A ac, 29mm　123-3223

Carrying Case and User Manual • RS Pro ICA 31 Current Transducer • RS Pro ICA 31 AC current transducer is a rugged, low-cost unit with high performance specifications.
When used in the mV ac range of a digital multimeter, it can measure currents up to 400 A ac.

RS PRO

RS PRO AFG21005 Function Generator 5MHz (Sinewave) USB　123-3529

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

RS PRO AFG21105 Function Generator & Counter 5MHz (Sinewave) USB　123-3531

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

RS PRO AFG21112 Function Generator & Counter 12MHz (Sinewave) USB　123-3532

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

RS PRO AFG21125 Function Generator & Counter 25MHz (Sinewave) USB　123-3533

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

RS PRO ISG LF44 RF Signal Generator　123-3580

USB Cable, User Manual, and Software on CD-ROM • RS Pro ISG-LF44 RF Signal Generator • RS Pro ISG-LF44 is a pocket-sized USB interface-compatible RF signal generator for use with smartphones and tablets.
Supports the frequency range from 35 MHz to 4400 MHz and provides continuous wave (CW) signal output without signal modulation.

RS PRO

RS PRO CC421-G Current & Voltage Calibrator, Max Voltage +199.9mV dc, Max Current 24mA　123-8769

RS Pro Handheld Voltage/Current Calibrator
This RS Pro portable device calibrates process devices and measures process signals. The quality and accuracy of this handheld calibrator is ensured by four functions: current source, current measurement, two-wire loop power and measurement, and DC mV voltage source.

RS PRO

RS PRO Test Probe, 10A　124-7401

4 Easily Accessible Back Probe Sets
RS Pro back probe tweezers are made of durable steel. Ideal for connecting to fuel injectors, MAP/TPS sensors, and weather-pack seal connectors. This modular design supports all industry-standard 4mm plugs with or without a shroud. Ideal for any test lead All probes come with different colors on the protective plastic tube, making it easier to identify and identify the connector being tested.

RS PRO

RS PRO Test Probe, 10A　124-7402

Easily accessible probe set, black/red
RS Pro back probe tweezers, sturdy steel fuel injector, MAP/TPS sensor, ideal for connecting to Weather-Pack seal type connectors. This modular design supports all industry-standard 4mm plugs with or without a shroud. Ideal for all test leads All probes included with protective plastic tubing Features and benefits: Black probe pin with outer diameter of 0.7 mm (0.028 inches) 2 colors (black/red)

RS PRO

RS PROMultimeter Test Lead Test Lead, CAT III, CAT IV, 600 V, 1000 V　125-3736

RS PRO Multimeter Test Lead Set, CAT III, CAT IV, 600 V, 1000 V. RS PRO shrouded 4 mm test lead terminations are for use with all types of test equipment that feature full safety sockets. Each set comprises 1 red, 1 back cable assembly and test prods. The cable is double insulated silicone with the inner insulation of a contrasting colour to indicate damage. Kit complies to EN61010-1 1000 V CAT III. Test leads for multimeters are used to test voltage, current, capacitance and other types of testing. Before making any voltage measurements, check the continuity of the leads to ensure that the fuses are intact. RS PRO have a wide range of multimeter test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. ; 161-1530 161-1530. Features and Benefits:. Lead length is 1.2m Current rating 10A Termination cable style – straight to right angle 4mm plugs silicone cable. Typical applications. Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test. Test and Measurement. Safety Precautions Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe. Leads should be inspected and tested on a regular basis to ensure that the insulation and their continuity has not been compromised. FAQs What accessories are compatible with these test leads? ; 125-3740 125-3740 – Crocodile clips ; 340-2566 340-2566 – Fused crocodile clips Crocodile clips (also known as alligator clips) are extremely useful as the sharp teeth and spring design means that they can clip onto anything to make quick and easy test connections. They allow you to test circuits without crossing wires or causing shorts. ; 125-3739 125-3739 – Sprung hook grabbers ; 125-3737 125-3737 – Fused test probes

RS PRO

RS PRO Grabber　125-3739

EN61010. Account should be taken of the protection features and safety ratings of the test meter itself when combined with high specification test leads. Test Lead Accessories. A range of accessories with 4 mm shrouded socket connections intended for use with the multimeter test lead set, CAT III, CAT IV, 600 V, 1000 V. All accessories meet the requirements of EN61010 to their rated voltage. Thin fine insulated prods set ; 2627770 2627770 for use with fused test prods and multimeter test lead sets are also available. Shuttered lantern probe set ; 2627786 2627786 for use with fused test prods and multimeter test lead sets. Features and Benefits. RS Pro Sprung Hook Grabbers 1000 V CAT III RS Pro GS38 fused test prods 1000 V CAT III fitted with 1000 V / 50 mA / 50 kA fuses RS Pro Crocodile Clips 1000 V CAT III

RS PRO

RS PRO 2205A Oscilloscope, PC Based, 2 Channels, 20MHz　163-2719

RS PRO

RS PROMultimeter Test Lead Probe Set　262-7786

GS38. RS PRO 4 mm Lantern Probe. Brought to you by RS PRO, Shutter lantern probe comprising 1 pair (red and black) shuttered 4 mm probes. Suitable for use with RS PRO Multimeters. All models are highly reliable and excellent quality. Features and Benefits. Screw-in shuttered lantern IEC 61010 Rating Measurement Category: 1000 V CAT III/IV Current Rating: 20 A Insulation Category: Double/Reinforced Pollution Degree: Two (2) Designed as a screw-on accessory for 600 V fuse probe. What are test probes?. Connecting to RS PRO multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by RS PRO, each probe provides much-needed precision. What are the differences between safety categories?. For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT II, CAT III), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT III 1000 V, provides a higher degree of protection than a CAT III 600 V probe.

RS PRO

RS PRO Crocodile Clip Set　264-7881

Suitable for: 83,85 and 87 1000V Cat III models. Test Clip Set 1000 Cat III. A pair of push on insulated crocodile clips complying to IEC1010 Cat III 1000V for use with the latest Cat III 1000V Fluke 80 series multimeter test prods.

RS PRO

RS PRO Air, General Temperature Probe, Type K, max. +1100 °C　342-8899

RS Pro General Purpose Mineral Insulated Probes. A series of RS Pro Temperature Probes. These probes can be carefully bent and shaped making them perfect for your application. All models are highly reliable and excellent quality. Features ; Benefits. Suitable for air or liquid measurement Type K probes are class I, type T probes are 1/2 class I Waterproof construction for ease of cleaning/sterilisation Cable Length is 2 m

RS PRO

RS PRO Surface Temperature Probe, Type K, max. +250 °C　342-8956

Do not submerge in water. Type K Surface (Band Probes). Features ; Benefits. Time constant 1 second (clean tip) Solid waterproof handle for added protection and to prevent damage by excess heat Wide temperature measurement range of -200 to 1000°C. Product Application Information. Ideally used in heating and ventilation applications, this probe can quickly determine surface temperatures of pipes, ducts or radiators.

RS PRO

RS PRO General, Surface Temperature Probe, Type K, max. +600 °C　342-8962

RS Pro Type K and T Surface Probes. A series of RS Pro Temperature probes. These low mass surface probes feature a sprung draught shield which protects the tip when not in use. The tip comprises a metal 4 mm diameter disc to which the thermocouple junction is attached. All models are highly reliable and excellent quality. Features ; Benefits. Waterproof Handle Wide temperature range Type K and T Available

RS PRO

RS PRO Surface Temperature Probe, Type K, max. +1100 °C　342-8978

High Temperature Surface Probe. This high temperature probe features a sprung stainless steel sensing disc The disc is contained within a ceramic outer sheath When the disc is in contact with the surface the ceramic outer acts as a draught shield thus ensuring a true surface measurement

RS PRO

Hot Wire Sensor for use with Lutron Series M4204　439-1120

RS Pro Anemometer Hot Wire Sensor. RS Pro anemometer hot wire sensor is a high performance telescopic probe, for use in very low air velocity measurement. Features and Benefits. Offers a hot wire and standard thermistor. Delivers rapid and precise measurements. Support recording maximum/minimum readings. Telescopic. Note. RS Pro anemometer hot wire sensor designed for use with RS Pro AM4204 hand held Hot-wire Anemometer.

RS PRO

RS PROMultimeter Test Lead Test Lead Kit　612-0835

Automotive Test Lead Kit. Automotive test lead set comprising. 2 pairs of silicone insulated test leads, 1.2m long, terminated in 4mm shrouded sockets 1 pair of fully insulated crocodile clips, with wide opening jaws ideal for battery terminals 1 pair of cable piercing prods 1 pair of thin back probing probes for access into the rear of automotive cable connectors. Spring steel probes give greater flexibility and cause less damage to rubber connector seals 10A current rating Supplied in durable plastic wallet roll

RS PRO

RS PRO USB Cable, WinDMM 50 Software　704-8135

RS50 Series Software and USB Cable. Communication software for RS53II ; 55II thermometers USB interface cable

RS PRO

RS PRO Immersion, Surface Temperature Probe, Type K, max. +250 °C　712-8196

Dual purpose Surface/Immersion Probe Type K and T. Features and Benefits. All in one surface / immersion temperature probe Stainless steel 316 (food grade) construction Sealed silicone rubber tip for waterproof assembly throughout 2 m coiled polyurethane lead Operating Temperature Range: -30 to +50°C

RS PRO

RS PROMultimeter Test Lead Test Lead Kit, Fused, CAT III 600 V　731-5273

Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance. RS PRO Multimeter Lead Set in Pouch. RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard. RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530. Contents Standard Set. 2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black). Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA. Also available: Thin fine insulated prods set ; 262-7770 262-7770 for use with fused test prods and multimeter test lead sets Shuttered lantern probe set ; 262-7786 262-7786 for use with fused test prods and multimeter test lead sets. Typical applications Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test. Test and Measurement. Safety Precautions Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

RS PRO

RS PROMultimeter Test Lead Test Lead Kit, CAT III 600 V　731-5277

Burns, due to arcing or flashover resulting from the use of unsatisfactory test probes, account for more accidents in electrical testing than are caused by electric shock. Because of this, fused test leads with 2mm or less of exposed insulation are recommended for electrical use by the HSE in their guidance. RS PRO Multimeter Lead Set in Pouch. RS PRO practical lead sets supplied in a durable grey pouch with attractive yellow piping. The standard set (731-5277) has a wide range of accessories for taking measurements in most situations. The fused set (731-5273) has extra fused test probes complying with the requirement of GS38 safety guidance for use on high energy circuits while taking voltage measurements. Both sets comply with IEC1010-1 cat III 600 V safety standard. RS PRO have a wide range of test leads, multimeters and accessories that have been RS approved meaning that the products are value for money and high-quality you can rely on. Replacement fuses can be purchased please see RS Stock no. 161-1530. Contents Standard Set. 2 x 1.2 m silicone multimeter leads with shrouded 4 mm terminations one end straight, one end right-angled, (red and black), 2 x crocodile clips (red and black), 2 x long reach multimeter probes fuse rating to 1000 V 600 mA (red and black), 2 x spring loaded, grabber multimeter probes (red and black). Extra items in fused sets, 2 x fused probes with only 4 mm of exposed metal tip fitted with 1.25" ceramic fuses rated at 660 V 500 mA. Also available: Thin fine insulated prods set ; 262-7770 262-7770 for use with fused test prods and multimeter test lead sets Shuttered lantern probe set ; 262-7786 262-7786 for use with fused test prods and multimeter test lead sets. Typical applications Test leads play an important part in electrical measurement especially when connecting a digital multimeter to the unit under test. Test and Measurement. Safety Precautions Always inspect the test probes for cracks and frayed leads before each use. If defects are found, do not use the probe.

RS PRO

RS PRO Thermo attachment pad　788-7148

Thermo Attachment Pads. Thermo attachment pads are designed for attaching small diameter thermocouples to surfaces. Pads are manufactured from 0.140 mm standard grade PTFE on impregnated fibreglass with 0.050 mm of high temperature silicone pressure sensitive adhesive The PTFE surface provides a quick release surface Temperature range: - 50°C to +250°C Pack of 100

RS PRO

RS PRO Tachometer Wheel　845-9753

RS Tachometer Accessories. Accessories and spares for the RS Rotaro, Redpoint and Mechanical tachometers. Suitable for Rotaro Tachometer ; 845-9674 845-9674 ; 845-9738 845-9738 Replacement contact adaptor ; 845-9781 845-9781 Welding wire speed adaptor Suitable for Optical Tachometers ; 845-9674 845-9674 and ; 845-9680 845-9680 ; 845-9731 845-9731 Reflective tape for optical tachometers = 77 x 10 mm Suitable for Contact Tachometers ; 845-9674 845-9674 , ; 845-9687 845-9687 , ; 845-9699 845-9699 , ; 845-9700 845-9700 and ; 845-9703 845-9703 ; 845-9740 845-9740 measuring wheel 0.1 meter ; 845-9753 845-9753 measuring wheel 6" ; 845-9750 845-9750 measuring tip ; 845-9762 845-9762 measuring funnel ; 845-9778 845-9778 12" measuring wheel

RS PRO

［Discontinued］RS PRO AFG21012 Function Generator 12MHz (Sinewave) USB　123-3530

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

［Discontinued］RS PRO IDS1054B Portable Digital Storage Oscilloscope, 50MHz, 4 Channels　123-3540

Passive Probe, Power Cord, User Manual, OpenWave Software (Free Download), USB and LabView Drivers (Free Download) • RS Pro IDS-1000B Series Visual Persistence Oscilloscope • RS Pro IDS-1000B Series Digital Storage Oscilloscope is a versatile measuring instrument with outstanding features.
These products use Visual Persistence Oscilloscope (VPO) technology.

RS PRO

［Out of stock］RS PRO Oscilloscope Probe, Probe Type: Differential, High Voltage 50MHz 1.5kV 1:10, 1:100　123-6478

RS Pro DC-50MHz High Voltage Differential Probe RSDPB4080
The RS Pro High Voltage Differential Probe is designed for measuring high voltage differential signals and meets the demand for floating measurements. This high bandwidth meets the demands of most measurement systems.

RS PRO

［Discontinued］RS PRO AFG-21025 Function Generator 25MHz (Sinewave) USB　124-0226

Power Cord, Test Lead, Quick Start Guide, User Manual CD
RS Pro AFG-21000/AFG-21100 Series Optional Function Generator

RS PRO

［Out of stock］RS PRO Manometer　144-5336

RS PRO

［Out of stock］RS PRO RS14 Digital Multimeter, RS380 Clampmeter, RS42 Digital Thermometer Multimeter Kit　144-6601

RS Pro RS14 Digital Multimeter, RS380 Clamp Meter and RS42 Thermometer Kit. Save money when you buy the RS Pro S14 Digital Multimeter, RS380 Clamp Meter and the RS42 Thermometer Kit together in this great value bundle. RS Pro RS14 Compact Multimeter Autoranging ; 1231938 1231938. This great value, compact, autoranging multimeter is CAT III rated for 600 V. It has a robust double-moulded plastic housing and oversized high contrast 2000 Counts LCD display. Features and Benefits. 2000 Counts LCD backlit display with function indication. Voltage 600 V ac/dc. Current 10 A ac/dc. Insulation Class 2, double insulation. Autoranging and data hold. MAX hold. Diode Check. Auto Power Off (approximately 15 minutes). Double-moulded plastic housing. EN61010-1 CAT III 600 V. Supplied with test leads, type K temperature probe, 9 V battery and user manual. RS Pro RS380 Compact AC Autoranging Clampmeter ; 1231935 1231935. RS380 is a great value clamp meter which fulfils all the requirements for safe AC current measurement. Its small body and jaws can access and test in tightly constrained locations. Features and Benefits. 400 A AC Current Measurement. Jaw opening 30 mm (approximately 1.2"). 2000 Counts LCD display. Data Hold. Auto Power Off. Low battery indication. Non-contact voltage detection. Voltage Detection Range: 100 V - 600 V. Continuity checks Threshold ;150 Ω, test current ;0.5 mA. Overvoltage Category III 600 V. Supplied with test leads, carrying case, temperature probe, AAA 1.5 V batteries x 2 and user manual. RS Pro RS42 Thermometer Type K Thermocouple ; 1231937 1231937. RS42 is a great value, dual input, portable, compact digital thermometer. It is designed to use external K-type thermocouples as temperature sensors. Temperature indication follows National Bureau of Standards and IEC584 temperature/voltage tables for K-type thermocouples. Features and Benefits. 3 digit backlit LCD display with maximum reading 1999. Type K thermometer with dual inputs direct or differential measurements. User Selectable Temperature Scales (°C or °F). User Selectable Resolution. Uses K type Thermocouple. Dual Thermocouple input. Wide variety of interchangeable thermocouple probes. Max Hold / Data Hold. Differential Temperature (T1-T2). SCAN Function (T1, T2, T1-T2, MAX. HOLD.). Backlit LCD Display. Auto Power Off. Supplied with K-type thermocouple bead probe 1.2 m, Teflon tape insulated x 2, 9 V battery, holster with stand, carrying case and instruction manual

RS PRO

［Out of stock］RS PRO Thermometer Kit Mineral Insulated Probes, RS52 Thermometer, Type K Surface Probes　144-6606

RS Pro RS52 Thermometer with Probes. Save money when you buy the RS Pro RS52 Thermometer, RS Pro General Purpose Mineral Insulated Probes and the RS Pro Type K and T Surface Probes together in this great value bundle. RS Pro Thermometers RS52 Series ; 1233216 1233216. The digital hand held thermometer is suitable for environmental test and measurement. These digital thermometers have an easy to read LCD display and optional measurement preference. The choice of data loggers can be based on many factors. The RS Pro 52 models offer a large display count of up to 1999. They also benefit from having a real-time stamp feature for minimum, maximum and average measurements. Features ; Benefits. RS Pro 52 Dual Channel K-Type. Two Type K bead thermocouples supplied. Reading hold function. Dual thermocouple input. Differential temperature (T1-T2). °C or °F display. Note: The values given indicate the specified model's total capability. All figures are dependent upon the thermocouple type being used. See the technical specifications for further information. RS Pro General Purpose Mineral Insulated Probes ; 3428899 3428899. A series of RS Pro Temperature Probes. These probes can be carefully bent and shaped making them perfect for your application. All models are highly reliable and excellent quality. Features ; Benefits. Suitable for air or liquid measurement. Type K probes are class I, type T probes are 1/2 class I. Waterproof construction for ease of cleaning/sterilisation. Cable Length is 2 m. RS Pro Type K and T Surface Probes ; 3428962 3428962. A series of RS Pro Temperature probes. These low mass surface probes feature a sprung draught shield which protects the tip when not in use. The tip comprises a metal 4 mm diameter disc to which the thermocouple junction is attached. Features ; Benefits. Waterproof Handle. Wide temperature range. Type K and T Available

RS PRO

［Out of stock］RS PRO Light Meter, 9999 fc, 99990 lx　146-4652

RS PRO

［Discontinued］RS PRO Oscilloscope Probe, Probe Type: Passive 25MHz 400V 1:10　146-6612

RS Pro Passive Oscilloscope Probes - RS-LF Series. RS Pro Passive Oscilloscope Probe RS-LF Series. Ergonomically designed probe suitable for use with all major brands of oscilloscopes as well as our range. RS Pro passive oscilloscope probes don't require a power supply or batteries so are lightweight and easily portable. Contents. LF Oscilloscope Probe Protective caps BNC adapter Spring hook tip Spare probe tip Grounding lead terminated with insulated crocodile clip. Probe Options. RS - LF 112 = RS stock no: ; 146-6612 146-6612 RS - LF 212 = RS stock no: ; 146-6613 146-6613 RS - LF 312 = RS stock no: ; 146-6614 146-6614 RS - LF 312-2-6 = RS stock no: ; 146-6615 146-6615 (2 pieces RS LF-312). Attenuation Ratio. 1:1 max. Input voltage 400 V CAT I (VDC + Peak AC) derating with frequency

RS PRO

［Discontinued］RS PRO Oscilloscope Probe, Probe Type: Passive 150MHz 20V 1:10　146-6613