[RS PRO]Fluorescent Lamp, Light Bulb
Filters
-
Wedge Indicator Light, Clear, 6.3 V, 250 mA, 10000h 106-234
14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
1 products found
JPY: 1,440
USD: 9.03
-
Wire Terminal Indicator Light, Clear, 6 V, 55 mA, 10000h 106-256
T-1 (5mm) Wire-Ended. Suitable for applications in the aerospace, telecommunications and computer industries.
1 products found
JPY: 1,670
USD: 10.47
-
Wire Terminal Indicator Light, Clear, 14 V, 50 mA, 1000h 106-262
T-1 (5mm) Wire-Ended. Suitable for applications in the aerospace, telecommunications and computer industries.
1 products found
JPY: 1,720
USD: 10.78
-
Wedge Indicator Light, Red, 12 V, 100 mA, 6000h 106-278
T-1 (5mm) coloured wedge
1 products found
JPY: 1,770
USD: 11.10
-
BA9s Indicator Light, Clear, 24 → 28 V, 71/83 mA, 25000h 106-284
T-3 (10mm) BA9s Tubular MCC. Tubular MCC lamps are suitable for applications in the automotive and gambling machine industries.
1 products found
JPY: 3,320
USD: 20.81
-
E10 Indicator Light, Clear, 2.5 V, 200 mA, 30h 106-307
E10 Tungsten Halogen MES. MES tungsten halogen filament lamps suitable for use with many popular torches and handlamps Super-high brightness
1 products found
JPY: 300
USD: 1.88
-
E10 Indicator Light, Clear, 48 V, 100 mA, 1000h 106-335
E10 Tungsten Halogen MES. MES tungsten halogen filament lamps suitable for use with many popular torches and handlamps Super-high brightness
1 products found
JPY: 4,090
USD: 25.64
-
E10 Indicator Light, Clear, 24 → 28 V, 71/83 mA, 25000h 106-341
T-3 (10mm) Tubular MES. Filament lamps will perform to specification and give optimum life when: a) They are powered at the rated voltage from a stabilised 50 Hz AC supply. b) Ambient temperature is in the range 20°C to 25°C. c) No mechanical vibration is present. Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments ( ;80mA). Power from a DC supply at the rated voltage can reduce the listed life by up to 50%. The effect of deviation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.
1 products found
JPY: 2,830
USD: 17.74
-
T10 Orange Filament Indicator Lamp, BA9s, 12 V 1.8 mA 106-408
T3 (10mm) MCC Neon Lamps c/w Integral Resistor
1 products found
JPY: 3,340
USD: 20.94
-
T10 Green Filament Indicator Lamp, BA9s, 220/250 V 1.8 mA 106-420
T3 (10mm) MCC Neon Lamps c/w Integral Resistor
1 products found
JPY: 3,190
USD: 20.00
-
Wedge Indicator Light, Clear, 14 V, 190 mA, 4000h 106-436
14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
1 products found
JPY: 1,400
USD: 8.78
-
Wire Terminal Indicator Light, Clear, 5 V, 115 mA, 40000h 106-458
T-1 (3mm) Wire-Ended. A range of T-1 (3mm) wire ended filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
1 products found
JPY: 1,850
USD: 11.60
-
Wedge Indicator Light, Clear, 24 → 28 V, 107/125 mA, 1000h 106-515
14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
1 products found
JPY: 1,400
USD: 8.78
-
［Discontinued］Wedge Indicator Light, Green, 12 V, 100 mA, 6000h 106-206
T-1 (5mm) coloured wedge
1 products found
JPY: 390
USD: 2.45
-
［Discontinued］E10 Indicator Light, Clear, 2.2 V, 300 mA, 18h 106-290
E10 Near-Far Brilliant MES. Lens design magnifies light output
1 products found
JPY: 69
USD: 0.43
-
［Discontinued］E10 Indicator Light, Clear, 2.5 V, 250 mA, 30h 106-313
G-3 (11mm) Round MES
1 products found
JPY: 550
USD: 3.45
-
［Discontinued］E10 Indicator Light, Clear, 2.5 V, 200 mA, 10h 106-329
G-3 (11mm) Round MES
1 products found
JPY: 510
USD: 3.20
-
［Discontinued］Wedge Indicator Light, Clear, 6.3 V ac/dc, 200 mA, 20000h 106-357
These switches are not positive break types and should not be used for emergency stop applications.Accessories listed are not ITW products. Suitable wedge base lamps include ; 106-357 106-357 , ; 655-9637 655-9637 , ; 655-9665 655-9665. High Impact IP67 Pushbutton Switches. The 76-94 Series from ITW, have been designed to cover a wide range of harsh environmental applications. Such as:-. Military Environments Robust Industrial Vandal resistant requirements Mining Industries Petrochemical Process control Material Handling. Features and Benefits. The range is available in 3 styles, push-button, rotary and panel lamp. Push-button comes in 4 button styles with 3 colour options and has solder/faston terminals as standard. The rotary is a single pole, 2 position, snap action switch with green or red spot indicator on the black actuator. The indicator version is available with a red, green or amber lens. Panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of approximately a 5 kg mass dropped from 40 cm (20J). (IP67 - totally protected against dust and protected against the effects of temporary immersion between 15 cm and 1 m. Duration of test 30 minutes). The bezels and the actuators have been designed from non- sparking zinc alloy. Explosive-proof material used.
1 products found
JPY: 630
USD: 3.95
-
［Discontinued］Wedge Indicator Light, Clear, 12 V, 417 mA, 1000h 106-363
14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
1 products found
JPY: 490
USD: 3.07
-
［Discontinued］Wedge Indicator Light, Clear, 12 V, 250 mA, 1000h 106-379
14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.
1 products found
JPY: 570
USD: 3.57
-
［Discontinued］Wire Terminal Indicator Light, Clear, 5 V, 60 mA, 40000h 106-464
T-1 (3mm) Wire-Ended. A range of T-1 (3mm) wire ended filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.
1 products found
JPY: 790
USD: 4.95
-
［Discontinued］Wedge Indicator Light, Clear, 12 → 15 V, 1 A, 100h 106-486
T-5 (16mm) wedge
1 products found
JPY: 820
USD: 5.14
-
［Discontinued］Wedge Indicator Light, Clear, 24 → 28 V, 630 mA, 100h 106-492
T-5 (16mm) wedge
1 products found
JPY: 790
USD: 4.95
