RS PRO

RS PRO USB 2.0, Male USB A to Male RS232, 0.5m Cable Assembly　144-5699

RS PRO

RS PRO 1.8m Power Cable, 2.1 mm Socket Lead to Unterminated, 1 A, 12 V　656-3901

Not to be used as mains connectors. DC Power Adaptor Leads. From RS Pro a high-quality DC adapter cable assembly for connecting a DC (direct current) source such as a power supply to an electrical device or for making a connection between two DC devices. This DC power cable assembly has a DC power connector on one end and the other end is unterminated to allow direct soldering into equipment. DC power cable assemblies are typically used to power small to medium appliances. What is a DC Power Cable Assembly?. A DC power cable assembly sometimes referred to as a DC power cord, is an electrical cable used to make a connection between two DC devices or a DC appliance to a DC power source such as a power supply. The cable assembly is terminated at both ends with a DC power connector which can be a plug or a socket (these are sometimes referred to as barrel connectors). One end of the cable is connected to the DC power source and the other end is connected to the equipment that needs to be powered. These plugs or sockets usually have a straight or right angle orientation to allow for design flexibility. This DC power lead cable has a connector at just one end with bare wires at the other. The advantage of this is that one end of the cable to be soldered directly into the equipment which allows for custom installations. Where are DC Power Cables Used?. DC power cable assemblies are commonly used in small to medium-sized electrical appliances such as portable computers and monitors, electronic keyboards, electronic instruments, sound systems and radios. Features and Benefits. 1.8 m cable length 0.129mm ;sup>2 ;/sup> (26 AWG) cable CSA Non-terminated one end for customer installations Overmold to protect the connection junction, provide insulation and prevent the wire from bending at the solder joints

RS PRO

Wedge Indicator Light, Clear, 6.3 V, 250 mA, 10000h　106-234

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

RS PRO

Wire Terminal Indicator Light, Clear, 6 V, 55 mA, 10000h　106-256

T-1 (5mm) Wire-Ended. Suitable for applications in the aerospace, telecommunications and computer industries.

RS PRO

Wire Terminal Indicator Light, Clear, 14 V, 50 mA, 1000h　106-262

T-1 (5mm) Wire-Ended. Suitable for applications in the aerospace, telecommunications and computer industries.

RS PRO

Wedge Indicator Light, Red, 12 V, 100 mA, 6000h　106-278

T-1 (5mm) coloured wedge

RS PRO

BA9s Indicator Light, Clear, 24 → 28 V, 71/83 mA, 25000h　106-284

T-3 (10mm) BA9s Tubular MCC. Tubular MCC lamps are suitable for applications in the automotive and gambling machine industries.

RS PRO

E10 Indicator Light, Clear, 2.5 V, 200 mA, 30h　106-307

E10 Tungsten Halogen MES. MES tungsten halogen filament lamps suitable for use with many popular torches and handlamps Super-high brightness

RS PRO

E10 Indicator Light, Clear, 48 V, 100 mA, 1000h　106-335

E10 Tungsten Halogen MES. MES tungsten halogen filament lamps suitable for use with many popular torches and handlamps Super-high brightness

RS PRO

E10 Indicator Light, Clear, 24 → 28 V, 71/83 mA, 25000h　106-341

T-3 (10mm) Tubular MES. Filament lamps will perform to specification and give optimum life when: a) They are powered at the rated voltage from a stabilised 50 Hz AC supply. b) Ambient temperature is in the range 20°C to 25°C. c) No mechanical vibration is present. Deviations from these criteria have a significant effect on lamp life, particularly with low current filaments ( ;80mA). Power from a DC supply at the rated voltage can reduce the listed life by up to 50%. The effect of deviation from the rated operating voltage should be noted: 5% above will reduce lamp life by up to 50%. 5% below will significantly increase lamp life. Power consumption may vary up to ±10% compared to the listed values at the rated supply voltage. Therefore particular care should be taken when a number of lamps are connected in series. In such applications it is recommended that the rated voltage be reduced by 10% to prevent premature failure of individual lamps.

RS PRO

T10 Orange Filament Indicator Lamp, BA9s, 12 V 1.8 mA　106-408

T3 (10mm) MCC Neon Lamps c/w Integral Resistor

RS PRO

T10 Green Filament Indicator Lamp, BA9s, 220/250 V 1.8 mA　106-420

T3 (10mm) MCC Neon Lamps c/w Integral Resistor

RS PRO

Wedge Indicator Light, Clear, 14 V, 190 mA, 4000h　106-436

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

RS PRO

Wire Terminal Indicator Light, Clear, 5 V, 115 mA, 40000h　106-458

T-1 (3mm) Wire-Ended. A range of T-1 (3mm) wire ended filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

RS PRO

Wedge Indicator Light, Clear, 24 → 28 V, 107/125 mA, 1000h　106-515

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

RS PRO

RS PRO Packaging Plastic Coated Wire, 50m　397-4819

Plastic Coated Tie Wire. General purpose tie wire, plastic coated Supplied in dispenser with easy-to-use cutter

RS PRO

RS PRO Metal Paperclip x10　777-7697

Grip Clips. Metal Size 30mm Colour: Black

RS PRO

［Discontinued］Parallel Cable Assembly 1m Male/Female IEEE488 to Male/Female IEEE488 Parallel Cable Assembly　454-4784

IEEE488 Cables. Diecast metal connectors for superior EMI/RFI suppression

RS PRO

［Discontinued］RS USB 2.0, Male USB A to Male USB B, 1m USB Cable and others

RS PRO

［Discontinued］Wedge Indicator Light, Green, 12 V, 100 mA, 6000h　106-206

T-1 (5mm) coloured wedge

RS PRO

［Discontinued］E10 Indicator Light, Clear, 2.2 V, 300 mA, 18h　106-290

E10 Near-Far Brilliant MES. Lens design magnifies light output

RS PRO

［Discontinued］E10 Indicator Light, Clear, 2.5 V, 250 mA, 30h　106-313

G-3 (11mm) Round MES

RS PRO

［Discontinued］E10 Indicator Light, Clear, 2.5 V, 200 mA, 10h　106-329

G-3 (11mm) Round MES

RS PRO

［Discontinued］Wedge Indicator Light, Clear, 6.3 V ac/dc, 200 mA, 20000h　106-357

These switches are not positive break types and should not be used for emergency stop applications.Accessories listed are not ITW products. Suitable wedge base lamps include ; 106-357 106-357 , ; 655-9637 655-9637 , ; 655-9665 655-9665. High Impact IP67 Pushbutton Switches. The 76-94 Series from ITW, have been designed to cover a wide range of harsh environmental applications. Such as:-. Military Environments Robust Industrial Vandal resistant requirements Mining Industries Petrochemical Process control Material Handling. Features and Benefits. The range is available in 3 styles, push-button, rotary and panel lamp. Push-button comes in 4 button styles with 3 colour options and has solder/faston terminals as standard. The rotary is a single pole, 2 position, snap action switch with green or red spot indicator on the black actuator. The indicator version is available with a red, green or amber lens. Panel sealed to IP67 and due to the construction and the materials used, are all capable of surviving the impact of approximately a 5 kg mass dropped from 40 cm (20J). (IP67 - totally protected against dust and protected against the effects of temporary immersion between 15 cm and 1 m. Duration of test 30 minutes). The bezels and the actuators have been designed from non- sparking zinc alloy. Explosive-proof material used.

RS PRO

［Discontinued］Wedge Indicator Light, Clear, 12 V, 417 mA, 1000h　106-363

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

RS PRO

［Discontinued］Wedge Indicator Light, Clear, 12 V, 250 mA, 1000h　106-379

14V type is also suitable for 12V operation. The 12V and 24V lamps are fully ‘E ‘ approved and are therefore suitable for all exterior vehicle and other commercial applications. T-3 (10 mm) wedge. A range of T-3 1/4 (10mm) wedge base filament indicators, specifically intended for illumination in confined spaces. Suitable for use in a wide variety of applications such as push-button microswitch indicators.

RS PRO

［Discontinued］Wire Terminal Indicator Light, Clear, 5 V, 60 mA, 40000h　106-464

T-1 (3mm) Wire-Ended. A range of T-1 (3mm) wire ended filament indicators, specifically intended for illumination in confined spaces, e.g. meters, switches, etc.

RS PRO

［Discontinued］Wedge Indicator Light, Clear, 12 → 15 V, 1 A, 100h　106-486

T-5 (16mm) wedge

RS PRO

［Discontinued］Wedge Indicator Light, Clear, 24 → 28 V, 630 mA, 100h　106-492

T-5 (16mm) wedge

RS PRO

［Discontinued］Hand Held Wired Microphone RS PRO, Unidirectional 500Ω　352-2698

Supplied with 3m cable and 6·3mm diameter plug. General Purpose Coloured Speech/Music Microphones. Microphones for general-purpose applications Suitable for singing, speech or narration Low sensitivity for optimised handling and control Unidirectional pick-up pattern Internal rubber shock isolation system Built in on/off switch

RS PRO

［Discontinued］RS PRO Gooseneck Microphone, Unidirectional 500Ω　699-7304

RS Pro Unidirectional Gooseneck Microphone. The perfect addition to a podium, this RS Pro dynamic gooseneck microphone provides excellent ambient noise isolation and feedback rejection in any environment. The microphone is easy to fit with its 3 pin XLR connector and is unidirectional meaning it can pick up a sound with high gain from a specific side of the microphone. Features and Benefits. Unidirectional. Frequency: 10 Hz to 16,000 Hz. Lightweight and flexible. 3-pin XLR connector. All metal case with non-glare black finish. What is a gooseneck microphone?. A gooseneck microphone is commonly found on podiums and is a microphone element integrated into a desktop base rather than a cable. The microphone elements are usually small and cardioid or super cardioid. The mic is designed to capture spoken word up close, rather than audio in the distance.