STMicroelectronics

STMicroelectronics STM32 Nucleo-144 MCU Development Board NUCLEO-F413ZH　NUCLEO-F413ZH

NUCLEO-F413ZH Nucleo-144 Development Board. This STM32 Nucleo-144 board provides an affordable and flexible way for users to build prototypes with the STM32F413ZHT6 microcontroller. The Zio connector, which is an extension of Arduino Uno, provides access to more peripherals and with the ST morpho headers expands the functionality with a choice of Shields. The integrated ST-LINK/V2-1 debugger/programmer comes with the STM32 comprehensive software HAL library, software examples, as well as direct access to the ARM mbed on-line resources. Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based and ARM mbed. STM32F413ZHT6 100MHz Cortex-M4F core microcontroller with 1.5MB Flash memory, 320KB SRAM Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory Up to 24 serial communication interfaces: USART, IrDA, I²C, SPI, LIN, CAN, USB, I²S, SDIO True random number generator CRC calculation unit RTC with subsecond accuracy and hardware calendar 96-bit unique ID Full access to all GPIO with ST Zio connector (Arduino Uno v3 connectivity support) ST morpho extension pin headers for access to all GPIO ST-LINK/V2-1 debugger/programmer with SWD connector Flexible board power supply USB OTG or FS Device with micro-AB connector 3 x LEDs: Power LED, USB communication, User LED User and Reset pushbuttons 32.768 KHz crystal oscillator ARM mbed Enabled (mbed.org)

STMicroelectronics

BTA40-600B 40A, 600V, TRIAC, Gate Trigger 1.3V 100mA, 3-pin, Panel Mount, RD-91 STMicroelectronics　BTA40-600B

TRIAC, 25A to 40A, STMicroelectronics

STMicroelectronics

STMicroelectronics STEVAL-MKI174V1, Adapter Board for DIP24 Socket　STEVAL-MKI174V1

LIS2DS12 3-Axis Accelerometer Adapter Board for DIP24 Socket, STMicroelectronics. The STEVAL-MKI174V1 is an adapter board designed to evaluate the MEMS digital output motion sensor LIS2DS12, an ultra low-power high performance 3-axis "pico" accelerometer. The board can be plugged into a standard DIP24 socket, providing access to the complete LIS2DS12 pinout. It comes ready-to-use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V3 motherboard, where you can use the downloadable graphical user interface (Unico GUI). Ultra-low current consumption, different with output data rates ±2 g / ±4 g / ±8 g / ±16 g full scale 16-bit data output Supply voltage 1.62 V to 1.98 V Independent Input/Output supply (1.8 V) High-speed I²C/SPI digital output interface Embedded temperature sensor 256-level FIFO buffer Motion and acceleration detection including free-fall, wakeup, single and double-tap detection

STMicroelectronics

STMicroelectronics 53L0-SATEL-I1, Gesture Sensor Satellite Board for VL53L0X　53L0-SATEL-I1

Two satellite boards are included in the kit. The VL53L0X is a Class 1 Laser product. 53L0-SATEL-I1 Range ; Gesture Sensor Satellite Boards. The 53L0-SATEL-I1 satellite board is based on the VL53L0X ranging and gesture detection module using FlightSense™ technology. This technology allows absolute distance to be measured independent of target reflectance. The VL53L0X precisely measures the time the light takes to travel to the nearest object and reflect back to the sensor (Time-of-Flight). VL53L0X 3-in-1 ranging and gesture detection sensor module. True distance measurement independent of target size and reflectance. +2.8V regulator and signal level-shifters on break-off board. Supports multi-module applications. Provides basic gesture recognition. Host communication: serial I²C bus

STMicroelectronics

STMicroelectronics STM32 Nucleo-32 MCU Development Board NUCLEO-L432KC　NUCLEO-L432KC

NUCLEO-L432KC Nucleo-32 Development Board. The NUCLEO-L432KC is a Nucleo-32 development board featuring the ultra-low power STM32L432KCU6 microcontroller. It enables you to prototype and develop ideas using the STM32 MCU, choosing from different combinations of performance, power consumption and features. The board comes with the STM32 comprehensive software HAL library with various packaged software examples. You will also have direct access to the ARM mbed™ on-line resources. What ‘s on-board? STM32L432KCU6 80MHz Cortex-M4F core microcontroller 256KB Flash memory 64KB SRAM Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory Ultra-low-power microcontroller with FlexPowerControl True random number generator CRC calculation unit 96-bit unique ID Real-Time Clock and Calendar Up to 3 capacitive sensing channels Serial communications: USART, SPI, I²C, USB, SAI, CAN, SWPMI, IRTIM Quad SPI memory interface ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability 3 x LEDs: Power LED, USB communication, User LED Reset pushbutton Arduino Nano connectivity support Flexible board power supply: USB or External ARM mbed Enabled (mbed.org)

STMicroelectronics

STMicroelectronics STM32 Nucleo-144 MCU Development Board NUCLEO-L496ZG-P　NUCLEO-L496ZG-P

NUCLEO-L496ZG-P Nucleo-144 Development Board. This NUCLEO-L496ZG-P Nucleo-144 board provides an affordable and flexible way for users to build prototypes with the STM32L496ZGT6P microcontroller with external SMPSU. The Zio connector, which is an extension of Arduino Uno, provides access to more peripherals and with the ST morpho headers expands the functionality with a choice of Shields. The integrated ST-LINK/V2-1 debugger/programmer comes with the STM32 comprehensive software HAL library, software examples, as well as direct access to the ARM mbed on-line resources. Supported by wide choice of Integrated Development Environments (IDEs) including IAR, Keil, GCC-based and ARM mbed. STM32L496ZGT6P 80MHz Cortex-M4F core MCU with 1MB Flash memory, 320KB SRAM, External SMPSU. Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory. LCD driver for 8 ;font face="symbol">´ ;/font> 40 or 4 ;font face="symbol">´ ;/font> 44 segments with step-up converter Up to 24 capacitive sensing channels: support touchkey, linear and rotary touch sensors. 8- to 14-bit camera interface up to 32MHz (monochrome) or 10MHz (colour). Up to 20 serial communication interfaces: USART, IrDA, I²C, SPI, LIN, CAN, USB, SDMMC, SWPMI. Serial Audio Interfaces. True random number generator. CRC calculation unit. RTC with subsecond accuracy and hardware calendar. 96-bit unique ID. Full access to all GPIO with ST Zio connector (Arduino Uno v3 connectivity support). ST morpho extension pin headers for access to all GPIO. ST-LINK/V2-1 debugger/programmer with SWD connector. Flexible board power supply. USB OTG or FS Device with micro-AB connector. 3 x LEDs: Power LED, USB communication, User LED. User and Reset pushbuttons. 32.768 KHz crystal oscillator. Energy benchmark: 217 ULPBENCH™ score. ARM mbed Enabled (mbed.org)

STMicroelectronics

STMicroelectronics P-NUCLEO-53L0A1, Gesture Sensor Evaluation Kit for VL53L0X　P-NUCLEO-53L0A1

NUCLEO-F401RE STM32 MCU board, 3 x height spacers, sensor cover glass, 2 x VL53L0X satellite boards, 2 x satellite headers. The VL53L0X is a Class 1 Laser product. P-NUCLEO-53L0A1 VL53L0X Expansion Board and STM32F401 MCU Board. The P-NUCLEO-53L0A1 kit is based on the VL53L0X ranging and gesture detection module using FlightSense™ technology. This technology allows absolute distance to be measured independent of target reflectance. The VL53L0X precisely measures the time the light takes to travel to the nearest object and reflect back to the sensor (Time-of-Flight). In order to evaluate the VL53L0X in an environment as close as possible to its final application, the expansion board comes with a holder in which three different height spacers of 0.25, 0.5 and 1mm can be fitted. They are used to simulate the air gap between a cover glass and the sensor. NUCLEO-53L0A1 Expansion Board Features. VL53L0X ranging and gesture detection module. 4-digit 7-segment display indicates target object range. Headers for two VL53L0X satellite modules. Arduino v3 compatible Shield headers for host MCU board connection. Holder for sensor cover glass and spacer

STMicroelectronics

STMicroelectronics STEVAL-ESC001V1 STEVAL BLDC Evaluation Board for L6398, STL160NS3LLH7, STM32F303　STEVAL-ESC001V1

STEVAL-ESC001V1 BLDC/PMSM Motor Speed Controller. The STEVAL - ESC 001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM). It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control applications like electric cars, boats and UAV drones. Board Features. 72MHz STM32F303CBT7 Cortex-M4F MCU with 128KB Flash memory, 32KB RAM. 3 x L6398D High Side/Low Side MOSFET gate drivers. 6 x STL160NS3LLH7 power MOSFETs configured as 3 x Half-Bridges. Maximum RMS output current: 20A. Current-sensing circuits. Phase-sensing circuit. Host communication: serial UART, I²C, CAN. On-board SN65HVD230 CAN bus transceiver. 2 x User LEDs. Battery Eliminator Circuit (BEC) provides +5V power to R/C receiver and servomotors. Test points for DAC, GPIOs, PWM signals, motor current feedback and CAN. Connector for ST-LINK/V2 Program/Debug tool. Dimensions: 29.1 x 58mm. Designed for Field Oriented Control (FOC) in sensorless mode. Supported by ST motor control software development kit (SDK). Ready to use with ST motor profiler. 3-shunt mode supported for motor current sensing. Board Protection. Cross conduction protection based on L6398 driver. Overcurrent and overvoltage protection feature (OCP/OVP). Thermal measuring and overheating protection with on-board NTC

STMicroelectronics

STMicroelectronics X-NUCLEO-IHM07M1 Motor Configuration BLDC Expansion Board for L6230 for STM32 Nucleo　X-NUCLEO-IHM07M1

X-NUCLEO-IHM07M1 BLDC/PMSM Motor Driver Expansion Board. The X- NUCLEO - IHM 07 M 1 is a three-phase Brushless DC motor (BLDC) driver expansion board based on the L6230 device. The L6230 driver is optimized for six-step and FOC algorithms thanks to independent current sensing. Operating voltage range: +8 to +48Vdc. Peak output current: 2.8A (1.4Arms). Operating frequency: Up to 100kHz. Non-dissipative over-current detection and protection. Cross-conduction protection. Over-temperature protection. Selectable 3-shunt or 1-shunt motor current sensing circuit. Hall/Encoder motor sensor connector and circuit. Potentiometer for manual speed setting. User LED. Screw terminals for motor signals and power supply. ST morpho connectors for host MCU board. Pads for Arduino Uno r3 Shield headers. Compatible with STM32 Nucleo MCU boards. Dimensions: 70 x 66mm. Compatible with ST Six Step or ST FOC control algorithms

STMicroelectronics

STMicroelectronics X-NUCLEO-IHM11M1 Motor Configuration BLDC Expansion Board for STSPIN230 for STM32 Nucleo　X-NUCLEO-IHM11M1

X-NUCLEO-IHM11M1 BLDC Motor Driver Expansion Board. The X- NUCLEO - IHM 11 M 1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life. Operating voltage range: +1.8 to +10Vdc. Output current: 1.3Arms. Current control with adjustable off-time. Standby consumption: ;80nA. Non-dissipative over-current detection and protection. Over-temperature protection. Interlocking function. Hall/Encoder motor sensor connector and circuit. 3 x Output activity LEDs. Fault LED. Potentiometer for manual speed control. Screw terminals for motor signals and power supply. ST morpho connectors for host MCU board. Arduino Uno r3 compatible Shield headers. Compatible with STM32 Nucleo MCU boards. Compatible with ST Six Step or ST FOC control algorithms

STMicroelectronics

STMicroelectronics X-NUCLEO-PLC01A1 PLC Driver for STM32 Nucleo　X-NUCLEO-PLC01A1

X-NUCLEO-PLC01A1 Industrial PLC Expansion Board. The X-NUCLEO-PLC01A1 is an input/output expansion board which provides an STM32 Nucleo MCU board with industrial PLC (Programmable Logic Controller) functionality. 8 x inputs protected by a CLT01-38SQ7 digital termination array. 8 x outputs driving a VNI8200XP octal high-side solid-state relay. Host communication: SPI bus protected by on-board Si8661 digital isolator. Status LEDs: Power OK, SPI Activity, Fault, Over-temperature. 16 x I/O activity LEDs. Screw connectors for all protected I/O. Compatible with STM32 Nucleo-64 MCU boards. Arduino Uno r3 compatible Shield headers. Designed for situations required to pass IEC61000-4-2 8kV and 15kV test standards. Free development firmware and example library compatible with STM32Cube firmware. Suitable STM32 Nucleo MCU Boards. ; 802-9412 802-9412 NUCLEO-F030R8 Cortex-M0 core processor. ; 802-9416 802-9416 NUCLEO-F103RB Cortex-M3 core processor. ; 802-9425 802-9425 NUCLEO-F401RE Cortex-M4F core processor

STMicroelectronics

STMicroelectronics STEVAL-BCNKT01V1, BlueCoin Microphone Sensor, Motion Sensor Starter Kit　STEVAL-BCNKT01V1

STMicroelectronics

STMicroelectronics STM32 Nucleo-64 MCU Development Board NUCLEO-L433RC-P　NUCLEO-L433RC-P

STMicroelectronics

STMicroelectronics STM32 Nucleo-144 MCU Development Board NUCLEO-L4R5ZI　NUCLEO-L4R5ZI

STMicroelectronics

STMicroelectronics STEVAL-SPIN3202 STSPIN32F0A Advanced 3-Phase BLDC Driver 3-Phase Motor Evaluation Board for　STEVAL-SPIN3202

STMicroelectronics

STMicroelectronics X-NUCLEO-IHM02A1 Two Axis Stepper Motor Driver Expansion Board Stepper Expansion Board for　X-NUCLEO-IHM02A1

STMicroelectronics

STMicroelectronics X-NUCLEO-IHM14A1 Stepper Motor Driver Expansion Board Stepper Expansion Board for X-NUCLEO-IHM14A1　X-NUCLEO-IHM14A1

STMicroelectronics

STMicroelectronics X-NUCLEO-LPM01A STM32 Nucleo Expansion Board Power Management for X-NUCLEO-LPM01A for STM32 Nucleo　X-NUCLEO-LPM01A

STMicroelectronics

STMicroelectronics, 5 V Linear Voltage Regulator, 1A, 1-Channel, 2% 3-Pin, TO-220 L7805ACV　L7805ACV

L78 Series Linear Voltage Regulator, STMicroelectronics. STMicroelectronics L78 Series of fixed output voltage regulators are useful in a wide range of applications within the electronics Industry. The three terminal positive linear voltage regulators can remove problems that are related with single point regulation by providing local on-card regulation. The ST Regulator IC can deliver up to 1.5A at the fixed output voltage, which can range from 5 V to 24 V. The voltage regulator offers safe area protection with the addition of internal thermal shutdown and current limiting.. Features and Benefits. Output current up to 1.5 A Thermal overload protection Output transition SOA protection Output current up to 1.5 A Output voltages of 5; 6; 8; 8.5; 9; 12; 15; 18; 24 V. Applications. Power Management

STMicroelectronics

STMicroelectronics, 1.2 → 37 V Linear Voltage Regulator, 1.5A, 1-Channel, Adjustable 3-Pin, TO-220 LM317T　LM317T

LM217/LM317 Linear Voltage Regulator, STMicroelectronics. The STMicroelectronics LM217 , LM317 Positive linear voltage regulator are robust as they feature internal current limiting and thermal shutdown. The adjustable voltage regulator is supplied in various packages from TO220, TO220FP and D2PAK devices. This series offers 1.5 Amps of load current with an output range of 1.2 V to 37 V by using the resistive divider.. 0.1% line and load regulation Safe operational area protection Floating operation for high voltage

STMicroelectronics

STMicroelectronics ULN2803A Octal NPN Darlington Pair, 500 mA 50 V HFE:1000, 18-Pin PDIP　ULN2803A

Darlington Transistor Arrays, STMicroelectronics. Darlington transistor power drivers are high-voltage, high-current switch arrays containing multiple open-collector Darlington pairs and integral suppression diodes for inductive loads. The high current rating of each output is 500 mA or higher. The inputs are pinned opposite the outputs in the IC package to simplify the application board layout. The interface is standard logic level for TTL or CMOS.

STMicroelectronics

STMicroelectronics BD911 NPN Transistor, 15 A, 100 V, 3-Pin TO-220　BD911

NPN Power Transistors, STMicroelectronics

STMicroelectronics

STMicroelectronics BD912 PNP Transistor, 15 A, 100 V, 3-Pin TO-220　BD912

PNP Power Transistors, STMicroelectronics

STMicroelectronics