[Klauke] AllProducts
Lab Instruments & Supplies
-
Electronic/Electrical Parts and Controll Equipments
Factory Work Tools & Supplies
-
Work Tools, Supplies
-
Klauke Uninsulated Crimp Ring Terminal, M6 Stud Size, 10mm² to 10mm² Wire Size 2R6
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 1,920
USD: 11.95
-
Klauke Uninsulated Crimp Ring Terminal, M6 Stud Size, 16mm² to 16mm² Wire Size 3R6
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 3,690
USD: 22.96
-
Klauke Uninsulated Tubular Ring Terminal, M8 Stud Size, 10mm² to 10mm² Wire Size 2R8
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 1,900
USD: 11.82
-
Klauke Uninsulated Crimp Ring Terminal, M8 Stud Size, 16mm² to 16mm² Wire Size 3R8
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 2,570
USD: 15.99
-
Klauke Uninsulated Tubular Ring Terminal, M8 Stud Size, 25mm² to 25mm² Wire Size 4R8
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 3,500
USD: 21.78
-
Klauke Uninsulated Tubular Ring Terminal, M8 Stud Size, 35mm² to 35mm² Wire Size 5R8
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 5,260
USD: 32.73
-
Klauke Uninsulated Tubular Ring Terminal, M8 Stud Size, 6mm² to 6mm² Wire Size 1R8
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 1,570
USD: 9.77
-
Klauke Ratchet Crimping Tool for Buttsplice K2
Klauke® K2 Hand Crimp Tool. The Klauke K2 Crimp Tool is a high-quality hand tool designed for crimping terminals, bootlace ferrules in a cross-section from 0.75 mm² to 16 mm². The K2 has marked crimping indents for the different terminal sizes and a ratchet mechanism that ensures secure, high-quality crimps at every time. Ergonomically designed handles guarantee safe and comfortable operation Features and Benefits: Designed to work with a wide range of terminals and cables in a cross-section from 0.75mm² to 16mm² A ratchet mechanism that guarantees a high-quality, consistent results Ergonomically designed handles Compact size: only 325 mm of length Weight: 600g Typical Applications: Maintenance ; repair Electrical Installations Cable assemblies FAQ ‘s: What is the difference between un-insulated and insulated crimp tools? Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present. How do you maintain the product? Axles and other movable parts should be regularly lubricated. Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants. Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly. The Importance of a High-Quality Crimp When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
1 products found
JPY: 36,000
USD: 223.99
-
Klauke L Series, Crimp Die Set HL425
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set HL435
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set HL450
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke Crimp Die Set, Open Barrel Terminal, Wire size 4 → 10 mm², Coaxial Type Cable Lugs R50/2
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 27,400
USD: 170.48
-
Klauke Uninsulated Tubular Ring Terminal, M12 Stud Size, 50mm² to 50mm² Wire Size 6R12
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 7,120
USD: 44.30
-
Klauke Uninsulated Tubular Ring Terminal, M12 Stud Size, 70mm² to 70mm² Wire Size 7R12
Klauke® Tubular Terminals. Tubular terminals without inspection hole Material: E-Cu tubing Electro tin-plated surface For suitable tools, see stock no. ; 398-3043 398-3043 or ; 398-2270 398-2270
1 products found
JPY: 8,390
USD: 52.20
-
Klauke Tubular Ring Terminal Crimp terminal Kit SK65B
Klauke SK65B Tubular Ring Terminal Kit. This versatile kit contains a total of 280 tubular ring terminals incorporating 12 of the most popular sizes. The K05 crimp tool is also included in this kit which has revolving hexagonal dies suitable for the various cross-sections required for crimping. The kit is supplied in a robust steel carry case with lock and carrying handle, and is perfect for on-the-go applications. For complete kit contents refer to the kit contents table
1 products found
JPY: 249,000
USD: 1,549.28
-
Klauke L Series, Crimp Die Set HL46
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set HL410
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set HL416
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set HL470
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,900
USD: 248.26
-
Klauke L Series, Crimp Die Set HL495
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,700
USD: 247.01
-
Klauke L Series, Crimp Die Set, Tubular Cable Lug, Wire size 150 mm² HL4150
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,800
USD: 247.64
-
Klauke L Series, Crimp Die Set, Tubular Cable Lug, Wire size 120 mm² HL4120
For compatible uninsulated terminals see stock number ; 531-043 531-043 (typical of range). For appropriate battery see stock number ; 459-6145 459-6145. Battery Operated Hydraulic Crimp Tool. From Klauke, a professional quality battery operated crimp tool for heavy duty uninsulated terminals within the wire range 6mm² to 95mm². The head is fully rotatable over 360°, offering versatility in awkward or confined spaces. Dies are automatically extracted after the crimp cycle, with a manual extraction facility provided. This range also includes a selection of appropriate dies and replacement battery. Features and Benefits: An ergonomic design that also permits one-handed operation Battery may be fast charged in 40 minutes Tool is supplied with charger and battery in a strong carry case Carry case has internal compartments to contain die sets Die sets in the range 6mm² to 95mm² are available separately, as are replacement batteries and chargers The Crimping cycle is 4 seconds A Battery Capacity of 2Ah Provides approx. 85 Crimping Cycles per Charge Weight including battery is 1.6kg
1 products found
JPY: 39,800
USD: 247.64
-
Klauke Crimp Die Set, Open Barrel Terminal, Wire size 0.5 → 10 mm² Q50/1
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 28,400
USD: 176.71
-
Klauke Crimp Die Set, Open Barrel Terminal, Wire size 0.25 → 6 mm², Coaxial Type Non-Insulated Receptacle CR50/1
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 55,700
USD: 346.57
-
Klauke 50 Series, Crimp Die Set, Tubular Cable Lug, Wire size 16-25 mm² L501625
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 27,400
USD: 170.48
-
Rechargeable Cable Cutter ES32FL
Lightweight and compact straight body, suitable for working at heights and in tight spaces.
Speedy disconnection is possible.1 products found
JPY: 264,054
USD: 1,642.94
-
Rechargeable Cable Cutter ES32L
Lightweight and compact straight body, suitable for working at heights and in tight spaces.
Speedy disconnection is possible.1 products found
JPY: 264,054
USD: 1,642.94
-
Rechargeable Cutter ESG25L
Lightweight and compact straight body, suitable for working at heights and in tight spaces.
Two types of galvanized steel strand wire (messenger wire) and ACSR can be easily cut.1 products found
JPY: 510,589
USD: 3,176.89
-
Rechargeable Cable Cutter ESM50CFM
Lightweight and compact straight body, ideal for working at heights and in tight spaces.
Speedy disconnection is possible.1 products found
JPY: 920,000
USD: 5,724.24
-
［Discontinued］Klauke Crimp Die Set, Open Barrel Terminal, Wire size 35 → 50 mm², Coaxial Type Cable End Sleeve AE50/3
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 10,860
USD: 67.57
-
［Discontinued］Klauke Crimp Die Set, Open Barrel Terminal, Wire size 10 → 25 mm², Coaxial Type Cable End Sleeve AE50/2
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 10,600
USD: 65.95
-
［Discontinued］Klauke Crimp Die Set, Open Barrel Terminal, Wire size 0.14 → 10 mm², Coaxial Type Cable End Sleeve AE50/1
Klauke EK50ML Die Sets. A range of crimp dies for the Klauke EK50ML electromechanical micro crimp tool. The Klauke 50 series of crimp dies are available for various connector types.Including bootlace ferrules, tubular terminals and DIN terminals. Part number ; 908-2880 908-2880 suitable for DIN terminals 0.5 mm – 10.00 mm² Part number ; 908-2884 908-2884 suitable for receptacles 0.25 mm – 6.00 mm² Part number ; 908-2896 908-2896 suitable for bootlace ferrules 0.14 mm -10.00 mm² Part number ; 908-2893 908-2893 suitable for bootlace ferrules 10.00 mm – 25.00 mm² Part number ; 908-2890 908-2890 suitable for bootlace ferrules 35.00 mm – 50.00 mm² Part number ; 908-2900 908-2900 suitable for tubular terminals 4.00 mm – 10.00 mm² Part number ; 908-2903 908-2903 suitable for tubular terminals 10.00 mm – 16.00 mm² Part number ; 908-2907 908-2907 suitable for tubular terminals 16.00 mm – 25.00 mm²
1 products found
JPY: 10,600
USD: 65.95
