MAX CO., LTD.

Flame-Retardant Apron NX 98 x 58mm　MT480-BE

Made from "Nomex (R) III" material with excellent flame retardancy. • Protects workers from hazards caused by sudden fires including high temperatures and flames.
Because of its strong and lightweight material, it can be worn as a general work wear.

MAX CO., LTD.

Cut Resistant And Impact Resistant Gloves 3D Guard (R) KV M and others

MAX CO., LTD.

Flame Retardant Arm Cover NX Strap Fixed and others

MAX CO., LTD.

Low Particle-Emission Mesh Gloves (10 Pairs) and others

MAX CO., LTD.

Inner Gloves For Clean 13 Gauge (10 Pairs) and others

MAX CO., LTD.

Half-Finger Inner Gloves For Clean 13 Gauge (10 Pairs)　MX301EX

It is a low dust producing type using filament yarn, and high gauge is used for better fit and stretchability.
Repeatable and economical.

MAX CO., LTD.

Inner Gloves For Clean 13 Gauge, Long (10 Pairs) and others

MAX CO., LTD.

Inner Gloves For Clean 15 Gauge (10 Pairs) and others

MAX CO., LTD.

Inner Gloves For Clean 15 Gauge, Long (10 Pairs) Clean Pack and others

MAX CO., LTD.

Dehumidifying Inner Gloves 13 Gauge (10 Pairs) and others

MAX CO., LTD.

Comfortable Inner Gloves 15 Gauge (10 Pairs) and others

MAX CO., LTD.

Comfortable Inner Gloves 15 Gauge・Long (10 Pairs) and others

MAX CO., LTD.

Comfortable Inner Half Finger Gloves 15 Gauge (10 Pairs) and others

MAX CO., LTD.

500℃ Correspondence Heat Resistant Glove (Three-Toed Type)　MZ610

High heat resistance fiber "Zylon (R)" is used on the front side and aramid fiber fuelt is used for heat insulation as an inner material for high heat resistance work.

MAX CO., LTD.

Cut Resistant Glove (Flat Part/With Slip Resistance)　MZ620

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is anti-slip.

MAX CO., LTD.

Cut Resistant Glove (Flat Part/With Palm)　MZ621

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" and has a high level of cut resistance.
The flat part is reinforced with cowhide.

MAX CO., LTD.

500℃ Correspondence Heat Resistant Glove　MZ623

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500℃ Correspondence Heat Resistant Glove (Three-Toed Type)　MZ624

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

500℃ Correspondence Heat Resistant Glove (Long)　MZ626

It uses high-strength fibers Xylon (R) and Kevlar (R) and has high heat resistance and cutting ability.
Para-aramid fiber felt is used inside the palm as insulation.

MAX CO., LTD.

500℃ Correspondence Heat Resistant Glove (Long, Three-Toed Type)　MZ627

Uses high-strength fibers "Zylon (R)" and "Kevlar (R)" with high heat resistance and high cut resistance.
Para aramid fiber fuelt is used as a heat insulating material on the inside of the palm.

MAX CO., LTD.

Heat Resistant, Cutting Resistant Arm Cover (Knitting)　MZ680

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Heat Resistant, Cutting Resistant Arm Cover (Knitting)　MZ681

Zylon (R) is a PBO fiber that has the highest strength and heat resistance of any existing organic fiber.
It has a flexible and flexible texture and is lightweight, so it has excellent workability.

MAX CO., LTD.

Cut Resistant Glove (Flat Part/With Slip Resistance)　MT700

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Cut Resistant Glove (Flat Part/With Palm)　MT702

These gloves are made of "Kevlar (R)" fiber, which provides unparalleled protection by adding strength without compromising sensitive hand movements.

MAX CO., LTD.

Heat Resistant Glove (300℃ Correspondence)　MT715

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistant Glove (300℃ Correspondence) Three-Toed Type　MT716

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistant Glove (300℃ Correspondence)　MT717

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistant Glove (300℃ Correspondence) Three-Toed Type, Long　MT718

The entire front surface is made of Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid fiber blended felt is used as insulation inside.

MAX CO., LTD.

300℃ Correspondence Heat Resistant Mitten　MT719

It uses Kevlar (R), a para-aramid fiber with a wide range of capabilities.
Para-aramid blended felt is used as insulation inside.

MAX CO., LTD.

Heat Resistant Glove For Clean room 300℃ Correspondence　MT720

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Heat Resistant Glove For Clean room 300℃ Correspondence　MT721

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Heat Resistant Glove For Clean room 300℃ Correspondence (Long)　MT722

These high-heat-resistant gloves are made of Kevlar (R), a high-strength fiber, and have a four-layer structure with aramid mixed felt and a special insulation sheet in the middle layer with the lining.
Three-dimensional sewing allows natural finger bending.

MAX CO., LTD.

Heat Resistant Mittens For Clean 300℃ Correspondence and others

MAX CO., LTD.

Heat Resistant Mittens For Clean 300℃ Correspondence (Long) and others

MAX CO., LTD.

Cut Resistant Finger Cover　MT737-L

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Cut Resistant Finger Cover　MT737-M

Cut resistant finger cover using high density knitted fabric of high-strength fiber "Dyneema (R)."
Protect your fingertips from glass pieces, box cutters, etc.

MAX CO., LTD.

Heat Insulation, Heat Resistant Mitten　MT764

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Heat Insulation, Heat Resistant Mitten (Long)　MT766

Aramid fibers with flame retardant function are coated with aluminum, and heat insulation material is placed in the entire intermediate layer to provide excellent heat and insulation properties.
It has a loose size which improves the feeling of wearing by three-dimensional sewing and takes into consideration the use of layered shoes.

MAX CO., LTD.

Assembly Gloves For Clean 220℃ Correspondence Clean Pack Item　MT776-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.

MAX CO., LTD.

Assembly Gloves For Clean 220℃ Correspondence (Long) Clean Pack Item　MT777-CP

Gloves made of synthetic leather "Galax (R)" that can withstand temperatures of 220°C while having flexible operability.