Tomosada Kenki MFG Co., Ltd.

Escargot S-100P M (T) and others

Tomosada Kenki MFG Co., Ltd.

Escargot S-125P M and others

Tomosada Kenki MFG Co., Ltd.

Escargot S-150P M　S-150PM

With the function of absorbing and removing dust, you can easily work without needing a dust collector.
Polishing wall and floor surfaces.

Tomosada Kenki MFG Co., Ltd.

Paper Pack escargot　14694373

High performance paper pack, breathable and dust resistant design.
Escargo replacement paper pack.

Tomosada Kenki MFG Co., Ltd.

Hand Mixer T L-11 and others

Tomosada Kenki MFG Co., Ltd.

Mortar filling hand pumps (Tsummar, Long, 18mm) and others

Tomosada Kenki MFG Co., Ltd.

Fresno blade and others

Tomosada Kenki MFG Co., Ltd.

Hand trower and others

Tomosada Kenki MFG Co., Ltd.

Drum Mixer　TMR-45

You can operate it by yourself and knead it easily.
It is also easy to clean.

Tomosada Kenki MFG Co., Ltd.

Carl TOP Corporation Mixer (lightweight Small and others

Tomosada Kenki MFG Co., Ltd.

Aluminum slippers　AL-SLP

It is a slipper that makes it difficult to leave footprints while concrete is not solidified and hard to sink during earthen floor finishing work.
The heel position is rearward for ease of walking.

Tomosada Kenki MFG Co., Ltd.

Carl TOP Corporation Mixer (lightweight Small) overall height 760mm and others

Tomosada Kenki MFG Co., Ltd.

Just Mazar overall height 800mm　PBM-25J

Small but powerful mixer.
It has a handle for easy loading and unloading.

Tomosada Kenki MFG Co., Ltd.

HUH Jar trower　TB-424

Works on the edge of the dirt floor (around the chile), around walls and columns, etc. can be performed easily and with high quality.
With a rotating ring (with a rubber belt), even if it hits a wall or column, it does not repel and goes smoothly.

Tomosada Kenki MFG Co., Ltd.

Squeeze Pump (standard product)　TS-075

A powerful and versatile compact pump.
For spray repair work, grout injection work, and other viscous fluid transport.

Tomosada Kenki MFG Co., Ltd.

Carl-top mixer (lightweight and compact) and others

Tomosada Kenki MFG Co., Ltd.

Mini Material Mixer　PBM-25JHS

Small but powerful motor.
With a top attached to the handle, it is easy to load and unload even by one person.

Tomosada Kenki MFG Co., Ltd.

Concrete Finishing Broom　12614500

Thin structure that prevents mortar from clogging.
With universal metal fittings, you can freely adjust the angle of the handle.

Tomosada Kenki MFG Co., Ltd.

Power Tamping Board Magic Tamper　ES-I

It can efficiently perform concrete leveling work from low slump to high slump.
You can perform leveling work and tamping work at the same time.

Tomosada Kenki MFG Co., Ltd.

Narrow Type Aluminum Board Screed　TAN-1200

Made of light and strong aluminum.
The ground plane is small and you can easily make a dirt floor.

Tomosada Kenki MFG Co., Ltd.

Hand Mixer　TL-11F

Continuously variable speed increases work efficiency.
Can be used from low viscosity to mortar.

Tomosada Kenki MFG Co., Ltd.

Hand Mixer　TL-11G

Continuously variable speed increases work efficiency.
For grout and leveling materials.

Tomosada Kenki MFG Co., Ltd.

Safety Cover Mr. Safety and others

Tomosada Kenki MFG Co., Ltd.

Safety Cover Mr. Safety and others

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Aluminum Screed TAS-900 P and others

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Magic tamper number 3-1300 1280x80x1780 and others

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Type S Aluminium Screed TAS-1300 S　TAS-1300S

The width (depth) of the blade section is narrower than that of a normal screed to reduce weight.
Flattens smoothly while flaring.

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Type S Aluminium Screed TAS-1500 S　TAS-1500S

The width (depth) of the blade section is narrower than that of a normal screed to reduce weight.
Flattens smoothly while flaring.

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Type S Aluminium Screed TAS-1800 S　TAS-1800S

The width (depth) of the blade section is narrower than that of a normal screed to reduce weight.
Flattens smoothly while flaring.

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Cutter Crack 3 TCC-330　TCC-330

A durable and easy manual type that can be used anywhere.
Sharp sharpness with high-performance, high-quality special steel cutting tools.

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Concrete Finishing Tool and others

Tomosada Kenki MFG Co., Ltd.

［Discontinued］Smoothing Disk　PMR-75N-4

NSM-75 optional.
It is a one-touch attachment that you just hang a blade on your nail.