Yanase Co., Ltd.

Cutting Grindstone 10 Pieces　RC-100TS10

Thin type for fast cutting speed and increased work efficiency.
Durable with double sided reinforcement.

Yanase Co., Ltd.

Abrasive Fabric Disk B-TOP 5 Pieces and others

Yanase Co., Ltd.

Felt Disk 5 Pieces　FD100S

Suitable for mirror finish polishing.
Soft and easy to use.

Yanase Co., Ltd.

Glass Polisher Glacerium 100g and others

Yanase Co., Ltd.

Liquid abrasive rust removal, dirt removal and others

Yanase Co., Ltd.

［Discontinued］Deburring Kit　YSP-107

A set that can deburr various shapes.
You can attach the blade to the wrapping bar handle with one touch.

Yanase Co., Ltd.

［Discontinued］Plastic Hardening Agent　GLIT

It can be repaired, bonded, filled, molded, etc. After curing, it can be painted, cut, shaved, and drilled.
Heat-resistant and water-resistant after curing.

Yanase Co., Ltd.

［Discontinued］Mini Kong CH Kit and others

Yanase Co., Ltd.

［Discontinued］Mini Kong NX (kit) and others

Yanase Co., Ltd.

［Discontinued］Angle Grinder 6mm collet and others

Yanase Co., Ltd.

［Discontinued］Double action sander 50　AGWA-3B

Gearless air sander.
Since there is no gear, there is little vibration and the rotation is smooth.

Yanase Co., Ltd.

［Discontinued］Angle polisher and others

Yanase Co., Ltd.

［Discontinued］Wraps sander　AGSS-FP

Three bearings are used in the spindle to improve rotational efficiency.
Uses a rotary air inlet that prevents the air hose from getting tangled.

Yanase Co., Ltd.

［Discontinued］Resinoid diamond thin Cutting Wheel 150x0. 5x25. 4 and others

Yanase Co., Ltd.

［Discontinued］Chip Saw Dorado iron, Stainless steel Common Φ180 and others

Yanase Co., Ltd.

［Discontinued］Iron, Stainless steel Common Chip Saw Dorado R　FHR-180

Since it has a thin blade of 1.4 mm, cutting resistance is reduced, and it cuts 2 times faster than conventional products.
Cutting resistance is reduced, so the cutting edge is not damaged and has a long life.

Yanase Co., Ltd.

［Discontinued］Spark disk 100X15 A60 10 sheets and others

Yanase Co., Ltd.

［Discontinued］Ron Black software　CNB02

Coated with abrasive grains on nylon non-woven fabric, no clogging and excellent polishing power.
The base material is not scraped, only the surface is polished.

Yanase Co., Ltd.

［Discontinued］Power diamond disk 100mm and others

Yanase Co., Ltd.

［Discontinued］No Chromium 24 60x125x35　YD-24

It has low oil content and excellent degreasability without solidifying the buff.
For soft metal mirror gloss finish, aluminum, brass, copper, zinc, etc.

Yanase Co., Ltd.

［Discontinued］No Chromium 36 55x130x40　YD-36

Excellent degreasability without solidifying the buff.
For hard metal mirror gloss finish, stainless steel, chrome and other hard plated surfaces.

Yanase Co., Ltd.

［Discontinued］No Chromium 500040　YD-5000

Ideal for non-ferrous metal mirror finish (Aluminum, brass, zinc, etc.) and precious metal mirror finish.
For the highest quality mirror finish.

Yanase Co., Ltd.

［Discontinued］Fin gar Pat Set SS and others

Yanase Co., Ltd.

［Discontinued］Octopus Brush Steel wire　TBM10-100

Steel wire rope (SW) is used for the wire.
To prevent fraying, each wire is processed with resin.

Yanase Co., Ltd.

［Discontinued］W Action Sander 50 Ceramic Kit　S-SET1

This is a sander that performs two simultaneous movements in which the entire putt rotates while the circular putt rotates.
For surface polishing, etc.

Yanase Co., Ltd.

［Discontinued］TOP Mini Sander Ceramic Kit　S-SET2

Compact, lightweight, high torque, and compatible with a wide variety of mini disks.
For surface polishing, etc.

Yanase Co., Ltd.

［Discontinued］Flap Sander Ceramic Kit　S-SET3

Three bearings are used in the spindle to improve rotational efficiency.
Uses a rotary air inlet that prevents the air hose from getting tangled.

Yanase Co., Ltd.

［Discontinued］Paper Ceramic Kit 2　S-SET4

Gearless air grinder.
The included pads provide the best elasticity and prevent excessive shaving.

Yanase Co., Ltd.

［Discontinued］Cushion Cone Ceramic Kit　S-SET5

A straight grinder with the latest lock system.
For polishing the inner surface of pipes, etc.

Yanase Co., Ltd.

［Discontinued］Finger Sander Ceramic Kit　S-SET6

Strong polishing with high-speed reciprocating (back and forth) motion.
For making corners and surfaces that are difficult to polish uniform.

Yanase Co., Ltd.

［Discontinued］Minicong U　YWE-U

Can also be used with commercially available 3mm axis bits.
It is easy to install with a quick one touch and has excellent accuracy.

Yanase Co., Ltd.

［Discontinued］Resinoid grinding wheel with shaft A (Black) Cylindrical Thin 50 x 6 x 6　BA506-H1-5P

Soft and easy to use whetstone.
For welding and deburring work.

Yanase Co., Ltd.

［Discontinued］GP Sisal Disc　GPS-SD2

Polished item for vertical use only.
It is very easy to replace with M10 screws.

Yanase Co., Ltd.

［Discontinued］GP Cotton Disc　GPS-CD2

Polished item for vertical use only.
It is very easy to replace with M10 screws.

Yanase Co., Ltd.

［Discontinued］Green Bar　YCF-5C

This product uses hot water to remove the hard-to-remove buffs, greatly reducing cleaning costs, and is environmentally friendly without using organic solvents.
The best performance can be achieved by using an ultrasonic cleaner together.

Yanase Co., Ltd.

［Discontinued］Tripoli　YCA-5

This product uses hot water to remove the hard-to-remove buffs, greatly reducing cleaning costs, and is environmentally friendly without using organic solvents.
The best performance can be achieved by using an ultrasonic cleaner together.

Yanase Co., Ltd.

［Discontinued］Tripoli　YE3-C

This product uses hot water to remove the hard-to-remove buffs, greatly reducing cleaning costs, and is environmentally friendly without using organic solvents.
The best performance can be achieved by using an ultrasonic cleaner together.

Yanase Co., Ltd.

［Discontinued］Low Speed Sander　YIG-100S76

It can perform polishing work without reducing torque while rotating at low speed.
For example, mirror work.

Yanase Co., Ltd.

［Discontinued］Low Speed Sander　YIG-PRO1

It can perform polishing work without reducing torque while rotating at low speed.
This set can be used horizontally or vertically and is ideal for various types of polishing.

Yanase Co., Ltd.

［Discontinued］Low Speed Sander　YIG-PRO2

It can perform polishing work without reducing torque while rotating at low speed.
A deburring set suitable for various burrs.