Omikogyo Co., Ltd.

Baseboards Bit (Blade diameter: 12.7mm)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick Bit (6mm) and others

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Straight, Φ6 × Blade length 20 x Total length 60mm) and others

Omikogyo Co., Ltd.

Carbide Drill Bit (Woodwork, Straight, Φ3 × Blade length 10 × Total length 35mm) and others

Omikogyo Co., Ltd.

V Groove Bit (Woodwork, 6 x 90 °)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

U Groove Bit (Woodwork, 6 x 12 R6) and others

Omikogyo Co., Ltd.

Drill Bit (Flash Structure Panel, 1 stage, 6 x 6) and others

Omikogyo Co., Ltd.

Corner Bit (With Guide Bearing, Model Number: 30031) and others

Omikogyo Co., Ltd.

Bottom Cutting Bit (Blade diameter 10mm) and others

Omikogyo Co., Ltd.

Adjustable Groove Cutter (3 to 15mm)　120G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

Woodwork Bit (Carbide 1 Stage Flash bit, 2P, 6 x 6)　1F66

Suitable for cutting out one side of veneer, board, etc.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

Woodwork Bit (Carbide Cutter, 2D, 6 x 12)　A2D

Both male and female ant grooving can be done with one.
Cutting at about 20,000 ~ 30,000 revolutions per minute. Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

Corner Bit (Simple Round Shape 1.5)　B15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Simple Round Shape 2.5)　B25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Straight Bit (With Guide Bearing, 6 x 10 M15)　GM15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Straight Bit (With Guide Bearing, 6 x 10 S6)　GS6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Male Bit)　HB

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Woodwork Bit (Strong 1 stage Flash bit, 8 x 8)　K1F88

High rigidity high speed material is adopted for the base metal part, and it is also compatible with heavy cutting such as 2×4 window drawing.
The tip blade has a high speed blade, and the cutting blade has a super hard outer blade with good scrub, enabling faster work than conventional products.

Omikogyo Co., Ltd.

Corner Bit (6 x 6.35)　KM635

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Chamfer 75 °, Φ18mm)　KM75

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Joint Cutting DX, 12 x 12)　MDX12

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Joint Cutting, Long 25)　ML25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Woodwork Bit (Carbide Straight, 12 x 10)　S1210

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Woodwork Bit (Carbide Straight, 12 x 12)　S1212

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

Woodwork Bit (U Groove Bit, 6 x 10 R5)　U610

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

U Groove Bit (Woodwork, 6 × 8R4)　U68

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

Adjustable Groove Cutter (3 to 21)　W21G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

Corner Bit (Side Groove, 3 x 4.5)　YB3

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Corner Bit (Side Groove, 6 x 8)　YB6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

［Out of stock］Drill Bit (Flash Structure Panel, Carbide Tip, 1 stage, 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

［Out of stock］Woodwork Bit (Carbide 2 Stages Flash bit, 12 x 12)　2F1212

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［Out of stock］Woodwork Bit (Carbide 2 Stages Flash bit, 6 x 6)　2F66

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［Out of stock］Woodwork Bit (Carbide Straight, 12 x 8)　S128

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［Out of stock］Woodwork Bit (Carbide Straight, 8 x 8)　S88

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.