[Showa Sokki Corporation]Vibration Gauge, Tachometer
Filters
-
Vibro Switch MODEL-1500B
Small vibration monitoring switch with integrated sensor, amplifier and relay.
Alarm level can be set in the range of 1~99% at 2 alarm relay contacts.1 products found
JPY: 85,000
USD: 532.82
-
Digital Shock and Vibration Accelerometer MODEL-1340B
Ultra-compact, easy-to-operate impact and vibration accelerometer.
It is very small and light, so it is convenient to carry with excellent workability.1 products found
JPY: 155,000
USD: 971.60
-
Portable Vibrometer DIGI-VIBRO MODEL-1332B
Handy type portable vibrometer.
Vibration measurement is easy for anyone. Ultra-compact, simple, practical and speedy measurement.1 products found
JPY: 99,800
USD: 625.59
-
Portable Vibrometer DIGI-VIBRO (Large Input Type) and others
3 products found
JPY: 113,000-
USD: 708.33-
-
Low-noise Cable 1.5m for DIGI-VIBRO and others
2 products found
JPY: 9,420-
USD: 59.05-
-
Curl Cable for DIGI-VIBRO LNC-3F-CC
A curl cable that can be used for 1332B series devices other than lightweight sensor types.
When you want to use a curl cable on the 1332B.1 products found
JPY: 12,600
USD: 78.98
-
Magnet for DIGI-VIBRO and others
2 products found
JPY: 4,190-
USD: 26.27-
-
L Contact Pin for DIGI-VIBRO and others
2 products found
JPY: 4,190-
USD: 26.27-
-
3.5 phi-BNC Output Cable 9803-97
Output cable for 1332B.
You can output AC from the 1332B and load it into the recorder.1 products found
JPY: 5,660
USD: 35.48
-
Vibro Recorder 9801
It can be connected to a vibrometer for easy waveform recording.
Can be recorded on a C F card and transferred to a personal computer.1 products found
JPY: 162,000
USD: 1,015.48
-
CF Card 9803-73
A CF card for use with a vibro recorder. The vibro recorder cannot store vibration waveforms without a CF card.
1 products found
JPY: 13,200
USD: 82.74
-
Battery Pack 9780
Battery pack used for vibro recorder.
Vibrorecorders cannot be charged without a battery pack.1 products found
JPY: 13,200
USD: 82.74
-
BNC-BNC Output Cable 9803-95
BNC- An output cable for a vibro recorder connected by BNC.
Since it is BNC-BNC, it can be used with other products.1 products found
JPY: 6,920
USD: 43.38
-
Clip-BNC Output Cable 9803-96
Clip — An output cable for a vibro recorder connected by a BNC.
1 products found
JPY: 5,660
USD: 35.48
-
Conversion Connector BNCP-C25J
Connector for converting 10-32 to BNC.
1 products found
JPY: 3,350
USD: 21.00
-
Carrying Case for vibro recorder 9782
This optional special case fits the vibro recorder set perfectly.
1 products found
JPY: 16,800
USD: 105.31
-
FFT analysis software 9803-90
This software enables waveform display and frequency analysis of data recorded with a Vibrorecorder or Vibroview on a personal computer.
1/3 Octave band analysis function is provided.1 products found
JPY: 73,300
USD: 459.48
-
Piezo-electric acceleration sensor and others
3 products found
JPY: 41,900-
USD: 262.65-
-
Portable Vibrometer Mini Vibrometer 1022A
Compact and lightweight analog meter type portable vibrometer.
Vibration measurement of rotating machinery and reciprocating machinery can be accurately performed.1 products found
JPY: 204,000
USD: 1,278.76
-
Magnet for Mini Vibro (for 1022A) MG-2
Magnet that can be used for 1022 A.
1 products found
JPY: 8,370
USD: 52.47
-
Mini Vibro Sensor Cable (for 1022A) CA2411-1
Sensor cable for use with 1022 A.
1 products found
JPY: 5,230
USD: 32.78
-
Vibrometer for Low Frequency Mini Vibro for Low Frequency 1422A
Handy size, portable low frequency vibrometer from 2Hz.
Vibrometer developed for low frequency vibration measurement.1 products found
JPY: 304,000
USD: 1,905.60
-
Vibro Recorder set (for 1332B) 9801-T01
1332B data recording set.
Connecting to the 1332B for easy waveform recording1 products found
JPY: 193,000
USD: 1,209.80
-
Vibro Converter (accelerometry) and others
8 products found
JPY: 47,100-
USD: 295.24-
-
AC output vibration sensor for PLC 2507
Standard cable is 3 meters.
Vibration sensor specialized for PLC (programmable logic controller) connection. Outputs waveform signals of vibration acceleration with high accuracy detection.1 products found
JPY: 47,100
USD: 295.24
-
Digital Monitor 2590C-A11
This digital vibration monitor can be combined with vibration converter 2502 series to easily measure and monitor vibration.
It receives a signal of 4~20 mA and can be scaled.1 products found
JPY: 62,800
USD: 393.66
-
Magnet for Vibro Converter MG-6
Special magnet for vibro converter 2502 series.
1 products found
JPY: 5,230
USD: 32.78
-
Vibro Converter Monitor Set (Accelerometry) and others
4 products found
JPY: 111,000-
USD: 695.79-
-
Sensor amplifier for PLC 9401-02
Vibration sensor amplifier developed for PLC (Pluggable Logic Controller) which aggregates IoT data.
It can be combined with various vibration sensors suitable for various applications and environments, and passes high-precision vibration waveform information to the PLC in real time.1 products found
JPY: 62,800
USD: 393.66
-
Accelerometer with built-in amplifier and others
2 products found
JPY: 40,400-
USD: 253.24-
-
Sensor Cable for PLC sensor amplifier (for 2470 and 2479-9401) 5m and others
2 products found
JPY: 13,100-
USD: 82.12-
-
Output Cable for PLC sensor amplifier (for 9401) CA2153-1
This output cable connects the 9401 inch model to the PLC.
1 products found
JPY: 2,310
USD: 14.48
-
Portable Shaker for calibration 8100
It is a vibrator for easily calibrating vibration sensors and vibration meters in the field.
The vibrator, oscillator and vibrometer are compactly integrated.1 products found
JPY: 519,000
USD: 3,253.31
-
Vibration Measuring device for elevator 6601
Vibration measurement equipment conforming to ISO's elevator diagnostic standards.
This equipment is put on the elevator, and the data is acquired and analyzed by the PC.1 products found
JPY: 605,000
USD: 3,792.39
-
Portable Balancer (one-sided modification set) and others
2 products found
JPY: 574,000-
USD: 3,598.07-
-
Balance Correction Calculator CAL-40
It is a small computer equipped with a special program for balance correction.
You can calculate the weight and mounting position of the balance weight simply by entering each parameter numerically according to the screen display.1 products found
JPY: 80,700
USD: 505.86
-
Vibration Detector for earthquake monitoring 2702
It is a vibration detector for monitoring ground motion.
3 direction vector of XYZ The combined vibration acceleration is output at DC4-20 mA.1 products found
JPY: 103,000
USD: 645.65
-
[Discontinued]Earthquake monitoring Vibration detector Digital Monitor Set MODEL2702D1
3 direction vector of XYZ The combined vibration acceleration is output 4-20 mA.
Display and alarm output are performed on the digital monitor 2590B.1 products found
JPY: 158,000
USD: 990.41
