[Unika Company Limited]ORANGE BOOK 2018 NEW ITEM
Filters
-
Board Lock Clear Pack B-412 (40 Pieces) B-412
Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.1 products found
JPY: 1,580
USD: 9.83
-
Steel Screw Value Pack F-425-SV (1000 Pieces) F-425-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 products found
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-432-SV (750 Pieces) F-432-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 products found
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-545-SV (300 Pieces) F-545-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 products found
JPY: 2,810
USD: 17.48
-
Steel Screw Value Pack F-560-SV (250 Pieces) F-560-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1 products found
JPY: 2,810
USD: 17.48
-
Stainless Steel Screw With B Drill FS-432 (110 Pieces) FS-432B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 products found
JPY: 1,860
USD: 11.57
-
Stainless Steel Screw Without B Drill FS-432DN (110 Pieces) FS-432DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 products found
JPY: 1,510
USD: 9.40
-
Stainless Steel Screw With B Drill FS-438B (85 Pieces) FS-438B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 products found
JPY: 1,860
USD: 11.57
-
Stainless Steel Screw Without B Drill FS-438DN (85 Pieces) FS-438DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 products found
JPY: 1,510
USD: 9.40
-
Stainless Steel Screw Without B Drill FS-545DN (45 Pieces) FS-545DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1 products found
JPY: 1,510
USD: 9.40
-
HSS High Speed Hole Saw (Without Collar) 12mm HSS-12TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole Saw (Without Collar) 13mm HSS-13TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole Saw (Without Collar) 14mm HSS-14TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 2,210
USD: 13.75
-
HSS High Speed Hole Saw (Without Collar) 39mm HSS-39TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,330
USD: 26.94
-
HSS High Speed Hole Saw (Without Collar) 40mm HSS-40TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Saw (Without Collar) 41mm HSS-41TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Saw (Without Collar) 42mm HSS-42TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Saw (Without Collar) 43mm HSS-43TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Saw (Without Collar) 44mm HSS-44TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,400
USD: 27.38
-
HSS High Speed Hole Saw (Without Collar) 45mm HSS-45TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole Saw (Without Collar) 46mm HSS-46TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole Saw (Without Collar) 47mm HSS-47TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole Saw (Without Collar) 48mm HSS-48TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole Saw (Without Collar) 49mm HSS-49TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 4,880
USD: 30.36
-
HSS High Speed Hole Saw (Without Collar) 50mm HSS-50TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole Saw (Without Collar) 51mm HSS-51TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole Saw (Without Collar) 52mm HSS-52TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole Saw (Without Collar) 53mm HSS-53TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole Saw (Without Collar) 54mm HSS-54TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 5,700
USD: 35.47
-
HSS High Speed Hole Saw (Without Collar) 55mm HSS-55TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole Saw (Without Collar) 56mm HSS-56TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole Saw (Without Collar) 57mm HSS-57TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole Saw (Without Collar) 58mm HSS-58TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole Saw (Without Collar) 59mm HSS-59TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,210
USD: 38.64
-
HSS High Speed Hole Saw (Without Collar) 60mm HSS-60TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,880
USD: 42.81
-
HSS High Speed Hole Saw (Without Collar) 63mm HSS-63TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 6,880
USD: 42.81
-
HSS High Speed Hole Saw (Without Collar) 65mm HSS-65TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1 products found
JPY: 7,430
USD: 46.23
-
META-CORE Max 35 Hole Saw Standard Center Pin (IKURA SEIKI) MXCP35-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 products found
JPY: 1,650
USD: 10.27
-
META-CORE Max 50 Hole Saw Standard Center Pin (IKURA SEIKI) MXCP50-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1 products found
JPY: 1,650
USD: 10.27
-
Steel Screw Silver P-425B-S (200 Pieces) P-425B-S
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1 products found
JPY: 1,360
USD: 8.46
