Unika Company Limited

Lewty sheet anchor for driving bar and others

Unika Company Limited

Junikon anchor for driving bar P T-30 and others

Unika Company Limited

Junikon anchor for driving bar S D-30 and others

Unika Company Limited

Bic one dedicated driving rod (mechanical SDS) and others

Unika Company Limited

Bic one high nut dedicated driving rod (mechanical SDS) and others

Unika Company Limited

Big one Case Set B C-02 and others

Unika Company Limited

Resin A 165ml Injection Type GE-165 and others

Unika Company Limited

Mini Pack nonpluvius F-425-SMP and others

Unika Company Limited

Mini Pack nonpluvius P-425 PIM-SM P and others

Unika Company Limited

Mini Pack nonpluvius PW-425-SMP and others

Unika Company Limited

Driving bar for Root-Cut Anchor　58C

Drive rod for route-cut anchor.
It's for hand-handling.

Unika Company Limited

Non-Plavis Stainless Steel Sara B Drill Tsuki 150 Pieces　FS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

plug-less Anchor Non Plavis Stainless Steel Nabe B with Drill (150 bottles)　PS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

Resin A Metal Brush 10　RA-MB10

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 13　RA-MB13

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 18　RA-MB18

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 28　RA-MB28

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Resin A Sleeve 10 pieces　RA-P2085

Plastic sleeve used when resin A, GE type is used for hollow base material.
Plastic sleeve used when resin A or GE type is used for hollow base material

Unika Company Limited

Resin A Push pumps　RA-PUP

Used to remove chips after drilling in concrete.
Cleaning inside concrete holes

Unika Company Limited

Junikon anchor for driving bar Long SD-30S x 1000　SD30SX1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Junikon anchor for driving bar Long SD-30S x 500　SD30SX500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 1000　SD30X1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 500　SD30X500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

SDS-MA x Bits 17.5 x 305 mm　SDSMAX17.5X305

SDS-max hammer drill exclusive bit that efficiently transmits strong striking rotational force to the cutting edge without loss.
The integrated design from the shank to the cutting edge makes it extremely powerful for through-hole and deep-hole work.

Unika Company Limited

Unicon Anchor Bucket Set　UB-01

A convenient set of Unicon anchors for use in the field.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Resin A HC-U type (striking type) HC-10 U and others

Unika Company Limited

Resin A SE Type (sealing capsule type) S E-10 and others

Unika Company Limited

Board lock Clear Pack B-405　B-405

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Board lock Clear Pack B-409　B-409

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Board lock Clear Pack B-416　B-416

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Board lock Clear Pack B-423　B-423

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Board lock Clear Pack B-427　B-427

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Board lock Clear Pack B-438　B-438

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

Big one anchor Bucket Set BB-03　BB-03

This is a convenient set of Big One anchors for suspension mounting.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Nonpluvius Stainless steel Plate B Drill pear FS-525DN　FS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Silver Pan B Drill pear P-535SDN　P-535-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Silver Pan B Drill pear P-545SDN　P-545-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Silver Pan B Drill pear P-560SDN　P-560-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Silver Pan B Drill pear P-570SDN　P-570-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Stainless steel pan B Drill without PS-525DN　PS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.