Unika Company Limited

Lewty sheet anchor for driving bar and others

Unika Company Limited

Junikon anchor for driving bar P T-30 and others

Unika Company Limited

Junikon anchor for driving bar S D-30 and others

Unika Company Limited

Bic one dedicated driving rod (mechanical SDS) and others

Unika Company Limited

Bic one high nut dedicated driving rod (mechanical SDS) and others

Unika Company Limited

Big one Case Set B C-02 and others

Unika Company Limited

Driving bar for Root-Cut Anchor　58C

Drive rod for route-cut anchor.
It's for hand-handling.

Unika Company Limited

Non-Plavis Stainless Steel Sara B Drill Tsuki 150 Pieces　FS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

plug-less Anchor Non Plavis Stainless Steel Nabe B with Drill (150 bottles)　PS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

Junikon anchor for driving bar Long SD-30S x 1000　SD30SX1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Junikon anchor for driving bar Long SD-30S x 500　SD30SX500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 1000　SD30X1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 500　SD30X500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

SDS-MA x Bits 17.5 x 305 mm　SDSMAX17.5X305

SDS-max hammer drill exclusive bit that efficiently transmits strong striking rotational force to the cutting edge without loss.
The integrated design from the shank to the cutting edge makes it extremely powerful for through-hole and deep-hole work.

Unika Company Limited

Unicon Anchor Bucket Set　UB-01

A convenient set of Unicon anchors for use in the field.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Big one anchor Bucket Set BB-03　BB-03

This is a convenient set of Big One anchors for suspension mounting.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Non-Pravis Silver Sara with B Drill (125 pcs) and others

Unika Company Limited

plug-less Anchor Non Pravis Stainless Steel Nabe B Drill None (85 bottles)　PS-438DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.

Unika Company Limited

Quick holder Bit (with drive holder) for UNICON Anchor only　UC-3030-SDS

The drill bit designed specifically for Unicon anchors has a stopper that stops at a predetermined bottom hole depth.
The driving holder is easy to put on and take off with one touch thanks to the O-ring mechanism.

Unika Company Limited

Unicon Anchor Hammering Tool　UC-3040-UX

Drill bit by itself.
Prehole construction of Unicon anchor

Unika Company Limited

Unicon Anchor Hammering Tool　UC-3040-SDS

The drill bit designed specifically for Unicon anchors has a stopper that stops at a predetermined bottom hole depth.
The driving holder is easy to put on and take off with one touch thanks to the O-ring mechanism.

Unika Company Limited

Bucket set　UB-21

A convenient set of Unicon anchors for use in the field.
Quick Holder Bit UC-3030-SDS is included in the set.

Unika Company Limited

Set Anchor Driving Rod and others

Unika Company Limited

Anchor Removal Tool and others

Unika Company Limited

Anchor Removal Tool　ARS-CC

The cone stuck in the hole during the removal of the temporary and unnecessary body driving type anchor can be easily removed with a strong magnet at the tip.
For removing the cone stuck in the hole in the extraction work of the main body driving type anchor routine cut CA type.

Unika Company Limited

Unicon Anchor and others

Unika Company Limited

Unicon Anchor Short and others

Unika Company Limited

Big One and others

Unika Company Limited

Big One and others

Unika Company Limited

Routine Anchor trivalent chromate and others

Unika Company Limited

Routine Anchor Stainless Steel and others

Unika Company Limited

Torque Control Anchor Big One BGR type　NBGR-30SD

This is a driving stick for the Big One BGR type.
The construction time is greatly reduced and the burden on construction workers is reduced.

Unika Company Limited

Torque Control Anchor Big One BGR type　RAD-BG30

This is a dedicated Big One BGR type driving attachment.
Can be installed on NBG-30SD to handle driving of BGR-3070M.

Unika Company Limited

［Discontinued］Bic one dedicated torque wrench　TBG-33045

Torque wrench for Big One (BG/BGL) only.
This is a 2-mode setting of 30 N · m (for M 10) and 45 N · m (for M 12), which are the specified tightening torque values of the Big One.

Unika Company Limited

［Discontinued］Set Anchor Driving Rod　38S

Drive rod for route-set anchor.
It's for hand-handling.

Unika Company Limited

［Discontinued］Set Anchor Driving Rod　48S

Drive rod for route-set anchor.
It's for hand-handling.

Unika Company Limited

［Discontinued］Set Anchor Driving Rod　58S

Drive rod for route-set anchor.
It's for hand-handling.

Unika Company Limited

［Discontinued］Resin Ace HC Type (self-tapping type)　HC-10

This is an adhesive anchor that can be easily installed by simply tapping into it.
It is OK if the bolts and rebar are cut in size.

Unika Company Limited

［Discontinued］Resin Ace HC Type (self-tapping type)　HC-13

This is an adhesive anchor that can be easily installed by simply tapping into it.
It is OK if the bolts and rebar are cut in size.

Unika Company Limited

［Discontinued］Resin Ace HC Type (self-tapping type)　HC-16

This is an adhesive anchor that can be easily installed by simply tapping into it.
It is OK if the bolts and rebar are cut in size.