YUKO Corporation

Flex horn #SC180 and others

YUKO Corporation

Miniature Brush and others

YUKO Corporation

KIC abrasive grain input Nylon Brush and others

YUKO Corporation

Flex horn #AO240 BC10. 0 and others

YUKO Corporation

Flex horn #AO180 BC4. 0　BC-40AO180

YUKO Corporation

Flex horn #SC320 BC64. 0　BC-640SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Handy, vacuum Pump and others

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-A-0.6

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-A-0.8

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush 81-AY Inc. (abrasive chunky Nylon Brush)　81-AY-0.8

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-10.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-11.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-12.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-7.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-8.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (stainless steel wire Brush)　81-B-9.0

Industrial manual super fine wire brush.
Use this product to remove burrs in cross holes of φ12 or less which cannot be covered by flex horn ®.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-10.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-11.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-12.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-7.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-8.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Miniature Brush (abrasive chunky Nylon Brush)　81-BY-9.0

Ultra-fine nylon brush with abrasive grains.
It is attached to a drill and used with a right rotation of 1000rpm or less.

YUKO Corporation

Flex horn #SC600 SC60　BC-10.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC60 SC60　BC-11.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO60 AO60　BC-12.0 AO60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO180 AO18　BC-12.7 AO180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO600 AO60　BC-12.7 AO600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC600 SC60　BC-18.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO120 AO12　BC-19.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC600 SC60　BC-19.0 SC600

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO320 AO32　BC-22.0 AO320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC120 SC12　BC-23.8 SC120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO240 AO24　BC-25.4 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC60 SC60　BC-29.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC320 SC32　BC-35.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC60 SC60　BC-35.0 SC60

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC180 SC18　BC-4.5 SC180

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #SC320 SC32　BC-41.0 SC320

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO240 AO24　BC-5.0 AO240

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.

YUKO Corporation

Flex horn #AO120 AO12　BC-51.0 AO120

It is a structure in which a ball of sintered population abrasive grain is attached to a foot made of fiber resin that comes out from the shaft.
The feet are made of nylon resin and are highly elastic. The inner surface of the workpiece is burr and the inner surface of the workpiece with irregularities can be polished.