Muraki Ltd.

Countersink (HSS) Tip Angle 90 °, Non-Coated Blade Diameter: 5.8 and others

Muraki Ltd.

Countersink (HSS), Tip Angle 90 °, Titanium Coating, Blade Diameter: 13.4 and others

Muraki Ltd.

Gun Drill for General Purpose Machine Tool and others

Muraki Ltd.

Countersink Bush Handle Mounting Adapter φ5.0 and others

Muraki Ltd.

Dixi NC Center Drill　11065.0

Dixi NC Center Drill 1106 Series.

Muraki Ltd.

［Discontinued］Carbide Universal Drill (For High-Hardness Materials, Φ1.0 × Blade length 13 × Total length 38mm) and others

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.0 TiAlN　2401.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.1　2401.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.2　2401.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.3　2401.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.4　2401.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.6　2401.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.7　2401.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.8　2401.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.9　2401.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ10.0 TiAlN　24010.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ11.0 TiAlN　24011.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ12.0 TiAlN　24012.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.0 TiAlN　2402.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.1　2402.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.2　2402.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.3　2402.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.4　2402.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.6　2402.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.7　2402.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.8　2402.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.9　2402.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.0 TiAlN　2403.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.1　2403.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.2　2403.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.3　2403.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.4　2403.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.6　2403.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.7　2403.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.8　2403.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.9　2403.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ4.0 TiAlN　2404.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ4.1　2404.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ4.2　2404.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ4.3　2404.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.