Fukudaseiko

Center chamfer mill countersink angle (°): 90 Drill diameter: 4 Length: 75 Shank Diameter:8 and others

Fukudaseiko

Center Chamfering EndMills 120 ° x 10 CM120X10　CM120X10

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 12 CM120X12　CM120X12

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 16 CM120X16　CM120X16

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 20 CM120X20　CM120X20

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 25 CM120X25　CM120X25

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 30 CM120X30　CM120X30

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 35 CM120X35　CM120X35

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 4 CM120X4　CM120X4

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 40 CM120X40　CM120X40

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 6 CM120X6　CM120X6

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 120 ° x 8 CM120X8　CM120X8

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 10 CM60X10　CM60X10

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 12 CM60X12　CM60X12

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 16 CM60X16　CM60X16

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 20 CM60X20　CM60X20

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 25 CM60X25　CM60X25

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 30 CM60X30　CM60X30

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 35 CM60X35　CM60X35

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 4 CM60X4　CM60X4

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 40 CM60X40　CM60X40

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 6 CM60X6　CM60X6

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills 60 ° x 8 CM60X8　CM60X8

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 10 CMU120X10　CMU120X10

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 12 CMU120X12　CMU120X12

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 16 CMU120X16　CMU120X16

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 20 CMU120X20　CMU120X20

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 25 CMU120X25　CMU120X25

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 30 CMU120X30　CMU120X30

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 6 CMU120X6　CMU120X6

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 120 ° x 8 CMU120X8　CMU120X8

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 10 CMU60X10　CMU60X10

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 12 CMU60X12　CMU60X12

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 16 CMU60X16　CMU60X16

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 20 CMU60X20　CMU60X20

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 25 CMU60X25　CMU60X25

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 30 CMU60X30　CMU60X30

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 6 CMU60X6　CMU60X6

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 60 ° x 8 CMU60X8　CMU60X8

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.

Fukudaseiko

Center Chamfering EndMills (With UF Processing) 90 ° x 10 CMU90X10　CMU90X10

Center positioning, chamfering, side machining, drilling, V-grooving and five other types of machining can be performed continuously with this single machine.
It can be used for metal working, die working, machining and many other purposes.