[DIJET INDUSTRIAL Co., Ltd.]Carbide Coated Drill
Filters
- by Product group
- by Product
Sort by:
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3 × Blade length 12mm) TLDM030
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,190
USD: 38.80
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.1 × Blade length 12mm) TLDM031
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.2 × Blade length 12mm) TLDM032
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.3 × Blade length 13mm) TLDM033
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.4 × Blade length 13mm) TLDM034
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.5 × Blade length 13mm) TLDM035
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,560
USD: 41.12
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.6 × Blade length 14mm) TLDM036
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.7 × Blade length 14mm) TLDM037
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.8 × Blade length 15mm) TLDM038
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 3.9 × Blade length 15mm) TLDM039
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4 × Blade length 15mm) TLDM040
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 6,810
USD: 42.69
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.1 × Blade length 16mm) TLDM041
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.2 × Blade length 16mm) TLDM042
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.3 × Blade length 17mm) TLDM043
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.4 × Blade length 17mm) TLDM044
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.5 × Blade length 17mm) TLDM045
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,310
USD: 45.82
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.6 × Blade length 18mm) TLDM046
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.7 × Blade length 18mm) TLDM047
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.8 × Blade length 18mm) TLDM048
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 4.9 × Blade length 19mm) TLDM049
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5 × Blade length 19mm) TLDM050
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 7,930
USD: 49.71
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.1 × Blade length 20mm) TLDM051
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.2 × Blade length 20mm) TLDM052
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.3 × Blade length 20mm) TLDM053
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.4 × Blade length 21mm) TLDM054
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.5 × Blade length 21mm) TLDM055
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,430
USD: 52.84
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.6 × Blade length 22mm) TLDM056
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.7 × Blade length 22mm) TLDM057
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.8 × Blade length 22mm) TLDM058
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 5.9 × Blade length 23mm) TLDM059
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,030
USD: 56.60
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6 × Blade length 23mm) TLDM060
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 8,460
USD: 53.03
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.1 × Blade length 23mm) TLDM061
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.2 × Blade length 24mm) TLDM062
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.3 × Blade length 24mm) TLDM063
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.4 × Blade length 25mm) TLDM064
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.5 × Blade length 25mm) TLDM065
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,410
USD: 58.99
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.6 × Blade length 25mm) TLDM066
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.7 × Blade length 26mm) TLDM067
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.8 × Blade length 26mm) TLDM068
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,990
USD: 62.62
-
Carbide Drill (Flat Drill, DZ Coated TiAlN, Blade diameter 6.9 × Blade length 27mm) TLDM069
Drill for counterboring with "flat" front.
It is possible to perform stable machining without pre-holes even in inclined plane and cross hole machining.1 products found
JPY: 9,990
USD: 62.62
