Taica Corporation

Vibration-proof material SN sheet SN 2 (Yellow) 0.5 to 2.0kg and others

Taica Corporation

Vibration-proof material in Choule x Rotor THETA-A 0.5-0.8kg and others

Taica Corporation

Vibration-proof material in Choule x Rotor Microplate & Tray SF 21.25-3.25kg and others

Taica Corporation

Vibration-proof material insulator Microplate & Tray (rubber Coating) 25-35kg and others

Taica Corporation

Vibration-proof material insulator BG Type BG 70.8-1.6kg and others

Taica Corporation

Vibration-proof material gel Bush Φ3mm 0.05-0.18kg and others

Taica Corporation

Gel Sheet lambda gel hardness 45 COH-4000LVC0.5mm and others

Taica Corporation

Taica SF-50 SUS 64mm Shock Mount M10 85mm Diameter, Male Only Alpha Gel, Rubber　SF-50 SUS

Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. A bag contains 1 item. Insulator SF-2 to SF-50 Series. SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt. All SUS versions are stainless steel equivalents. Features and Benefits. Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts Also Absorbs Shock and Reduces Noise Base Mounting with Top Stud Fixing Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg Strong Bond Between Metal Parts and Silicon Excellent for Outdoor Use SF-2, SF-5 and SF-10 have stainless steel bottom plate SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions. Application Information. Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment. SF-30 and SF-50. Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.

Taica Corporation

Taica SF-2 SUS 40mm Shock Mount M6 30mm Diameter, Male Only Alpha Gel　SF-2 SUS

Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. A bag contains 1 item. Insulator SF-2 to SF-50 Series. SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt. All SUS versions are stainless steel equivalents. Features and Benefits. Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts Also Absorbs Shock and Reduces Noise Base Mounting with Top Stud Fixing Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg Strong Bond Between Metal Parts and Silicon Excellent for Outdoor Use SF-2, SF-5 and SF-10 have stainless steel bottom plate SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions. Application Information. Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment. SF-30 and SF-50. Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.

Taica Corporation

Taica SF-5 SUS 40mm Shock Mount M6 30mm Diameter, Male Only Alpha Gel　SF-5 SUS

Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. A bag contains 1 item. Insulator SF-2 to SF-50 Series. SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt. All SUS versions are stainless steel equivalents. Features and Benefits. Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts Also Absorbs Shock and Reduces Noise Base Mounting with Top Stud Fixing Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg Strong Bond Between Metal Parts and Silicon Excellent for Outdoor Use SF-2, SF-5 and SF-10 have stainless steel bottom plate SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions. Application Information. Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment. SF-30 and SF-50. Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.

Taica Corporation

Taica SF-10 SUS 40mm Shock Mount M6 30mm Diameter, Male Only Alpha Gel　SF-10 SUS

Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. A bag contains 1 item. Insulator SF-2 to SF-50 Series. SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt. All SUS versions are stainless steel equivalents. Features and Benefits. Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts Also Absorbs Shock and Reduces Noise Base Mounting with Top Stud Fixing Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg Strong Bond Between Metal Parts and Silicon Excellent for Outdoor Use SF-2, SF-5 and SF-10 have stainless steel bottom plate SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions. Application Information. Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment. SF-30 and SF-50. Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.

Taica Corporation

Taica 4mm 6.5mm Shock Mount GEL Bush S-6 60 → 90Hz Brass (Collar), Silicone (Bush) +200°C -40°C 0.2 →　GEL Bush S-6

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica 4mm 6.5mm Shock Mount GEL Bush S-8 60 → 90Hz Brass (Collar), Silicone (Bush) +200°C -40°C 0.2 →　GEL Bush S-8

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica MN-7 SUS 22mm Shock Mount M6 30mm Diameter, Male to Male Alpha Gel　MN-7 SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica MN-5 SUS 22mm Shock Mount M6 30mm Diameter, Male to Male Alpha Gel　MN-5 SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica THETA-A SUS 13mm Shock Mount M4 18mm Diameter, Male to Male Alpha Gel　THETA-A SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica THETA-B SUS 18mm Shock Mount M4 18mm Diameter, Male to Male Alpha Gel　THETA-B SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica THETA-C SUS 18mm Shock Mount M6 25mm Diameter, Male to Male Alpha Gel　THETA-C SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica THETA-TW SUS 25mm Shock Mount M6 35mm Diameter, Male to Male Alpha Gel　THETA-TW SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

Taica 3mm 6.5mm Shock Mount GEL Bush S SUS 64 → 42 (Resonance Point)Hz Brass, Gel 11mm　GEL Bush S SUS

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica 3mm 8mm Shock Mount GEL Bush A-1 SUS 67 → 35 (Resonance Point)Hz Brass, Gel 14mm　GEL Bush A-1 SUS

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica 3mm 8mm Shock Mount GEL Bush A-2 SUS 49 → 37 (Resonance Point)Hz Brass, Gel 14mm　GEL Bush A-2 SUS

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica 4mm 11.5mm Shock Mount GEL Bush B-1 SUS 49 → 23 (Resonance Point)Hz Brass, Gel 25mm　GEL Bush B-1 SUS

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

Taica 2m Anti Vibration Mat NP GEL GREEN +200°C -40°C 2000 x 450mm 3mm Gel 450mm　NP GEL GREEN

Powder is applied to the surface. Alpha GEL. A range of vibration isolating gel foam pads containing Alpha Gel®, a revolutionary gel that has outstanding shock absorbency, excellent workability and long-term stability and durability. The NP Gel has excellent temperature performance from -40°C up to 200°C, and low compression set compared to most foam materials. Features and Benefits. Enhanced Shock Absorption Resistance to Ozone Wide Operating Temperature Range Lightweight Low Compression Set Flame Retardant. Product Application Information. The Alpha Gel has amazing shock absorbing capabilities making it ideal for sports and industrial applications. Alpha Gels easy adjustability in shape makes vibration damping ideal for light loads and microvibration. Applications include shoe cushioning, mattresses, pen grips, miniaturised products and noise suppression under precision instruments.

Taica Corporation

Taica 1m Anti Vibration Mat NP GEL WHITE +200°C -40°C 1000 x 300mm 6mm Gel 300mm　NP GEL WHITE

Powder is applied to the surface. Alpha GEL. A range of vibration isolating gel foam pads containing Alpha Gel®, a revolutionary gel that has outstanding shock absorbency, excellent workability and long-term stability and durability. The NP Gel has excellent temperature performance from -40°C up to 200°C, and low compression set compared to most foam materials. Features and Benefits. Enhanced Shock Absorption Resistance to Ozone Wide Operating Temperature Range Lightweight Low Compression Set Flame Retardant. Product Application Information. The Alpha Gel has amazing shock absorbing capabilities making it ideal for sports and industrial applications. Alpha Gels easy adjustability in shape makes vibration damping ideal for light loads and microvibration. Applications include shoe cushioning, mattresses, pen grips, miniaturised products and noise suppression under precision instruments.

Taica Corporation

［Discontinued］Taica SF-30 SUS 64mm Shock Mount M10 85mm Diameter, Male Only Alpha Gel, Rubber　SF-30 SUS

Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. A bag contains 1 item. Insulator SF-2 to SF-50 Series. SF series to be used in compression only applications. These mounts have a plate at the bottom instead of a bolt. All SUS versions are stainless steel equivalents. Features and Benefits. Compression Dampens to a Lower Frequency than Rubber and Neoprene Mounts Also Absorbs Shock and Reduces Noise Base Mounting with Top Stud Fixing Dampens Vibrations on Four Legged Subject Load from 5 kg up to 50 kg Strong Bond Between Metal Parts and Silicon Excellent for Outdoor Use SF-2, SF-5 and SF-10 have stainless steel bottom plate SF-2 SUS, SF-5 SUS and SF-10 SUS are full stainless steel versions. Application Information. Ideal for Vacuum Pumps, Precision Equipment, Measuring Applications, On-Board Computers and Other Sensitive Electronic Equipment. SF-30 and SF-50. Ideal for when there is a need for damping heavy load vibration. An excellent choice for outdoor use due to its durable alphagel® which is wrapped with EPDM rubber.

Taica Corporation

［Discontinued］Taica 4mm 6.5mm Shock Mount GEL Bush S-5 60 → 90Hz Brass (Collar), Silicone (Bush) +200°C -40°C 0.2 →　GEL Bush S-5

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.

Taica Corporation

［Discontinued］Taica MN-3 SUS 22mm Shock Mount M6 30mm Diameter, Male to Male Alpha Gel　MN-3 SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

［Discontinued］Taica MN-10 SUS 22mm Shock Mount M6 30mm Diameter, Male to Male Alpha Gel　MN-10 SUS

A bag contains 1 item. Soft Silicone Gel Mounts. Soft silicone gel mounts for vibration isolation, shock absorption and noise reduction. Used for vibration damping on loads from 2 kg up to 100 kg supported at 4 points. Gel anti-vibration mounts are able to dampen to a lower frequency than rubber or neoprene. All SUS versions are stainless steel equivalents. Features and Benefits. Fixable by two vertical slotted bolts Strong Bond Between Metal Parts and Silicone High Temperature Resistance -40 to 200°C Excellent Weathering Properties, Ozone Resistant, UV Resistant and Chemically Resistant Not Suitable for Applications Involving Uneven Loads, Angular Loading, Twisting, Tensile or Shearing Loads. Application Information. Ideal for use on vacuum pumps, precision equipment, measuring applications, on-board computers and other sensitive electronic equipment.

Taica Corporation

［Discontinued］Taica 4mm 11.5mm Shock Mount GEL Bush B-2 SUS 38 → 20 (Resonance Point)Hz Brass, Gel 25mm　GEL Bush B-2 SUS

Gel Bushes. Silicone gel bushes ideal for vibration isolation, shock absorption and noise reduction in PCBs, fans, small motors, precision instruments, hard disc drives and small components. Gel bushes are softer than traditional rubber and thermoplastic anti-vibration mounts and exhibit excellent stability at temperatures from -40 to 200°C. Features and Benefits. Through Bolts Type Usable Bolts: M3 or Smaller for Types A and S, M4 or Smaller for Type B Minimum Horizontal Deflection Split Unit to Make Installation Easier and to Suit Varying Material Thickness Excellent Weathering Properties, Ozone Resistant No Loss of Performance After Repeated Compression UV Resistant and Chemically Resistant and Out Door Use. Product Application Information. Suitable for isolating vibration on equipment from 0.2 kg up 32 kg.