ISHIHASHI SEIKO

Cobalt HSS Straight Drill (MASAMUNE, Φ1.0 x Blade length 18.5 x Total length 42.5mm, Blister Pack) and others

ISHIHASHI SEIKO

HSS Straight Drill (Extra MASAMUNE, Φ1.5 x Blade length 23.0 x Total length 48.5mm, Blister Pack) and others

ISHIHASHI SEIKO

Drill With Small diameter Tip Drill (Ultra MUSASHI, Φ2.5 x Blade length 35 x Total length 61mm, Blister Pack) and others

ISHIHASHI SEIKO

Straight Drill Set (13 Pieces, Φ1.5 to Φ6.5mm / 0.5mm pitch)　D13-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (19 Pieces, Φ1.0 to Φ10.0mm / 0.5mm pitch)　D19-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (25 Pieces, Φ1.0 to Φ13.0mm / 0.5mm pitch)　D25-S

Drill set for general drilling.
Convenient to carry with a steel case.

ISHIHASHI SEIKO

Straight Drill Set (100 Pieces, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　D100-RS

Drill set for general drilling.
Work Material: Mild Steel, General Steel, Cast Iron, Light Alloy.

ISHIHASHI SEIKO

Drill Set (10 Pieces, Extra MASAMUNE, Φ3.0 to Φ6.5mm / 0.5mm pitch)　EXD-10S

With cross-thinning at the tip, this drill set does not require a punch and cuts quickly.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (15 Pieces, Extra MASAMUNE, Φ3.0 to Φ10.0mm / 0.5mm pitch)　EXD-15S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (21 Pieces, Extra MASAMUNE, Φ3.0 to Φ13.0mm / 0.5mm pitch)　EXD-21S

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Drill Set (100 Pieces, Extra MASAMUNE, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　EXD-100RS

Since the tip part is cross-thinned, there is no need for a punch, and this drill set cuts quickly and has excellent sharpness.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (13 Pieces, MASAMUNE, Φ1.5 to Φ6.5mm / 0.5mm pitch, Φ3.2mm)　COD-13S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
The sharpness does not affect hard-to-cut materials.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (19 Pieces, MASAMUNE, Φ1.0 to Φ10.0mm / 0.5mm pitch)　COD-19S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (25 Pieces, MASAMUNE, Φ1.0 to Φ13.0mm / 0.5mm pitch)　COD-25S

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt HSS Drill Set (100 Pieces, MASAMUNE, Φ1.0 to Φ10.0mm / 0.1mm pitch, Φ10.5 to Φ13.0mm / 0.5mm pitch, Φ10.9, Φ11.9, Φ12.9mm)　COD-100RS

This is a drill set with sharpness that does not cause problems with hard-to-cut materials such as stainless steel and titanium alloy hard steel.
Work Material: General Steel, Stainless Steel.

ISHIHASHI SEIKO

Cobalt Spiral Tap & Drilling Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　COSSD-21

This is a set of spiral tap and downhole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　COJSD-21

It is a set of jet tap, spiral tap and bottom hole drill for stainless steel and hard-to-cut materials.
Work Material: Stainless Steel, Hard-to-Cut Material.

ISHIHASHI SEIKO

Spiral Tap & Drill Set (21 Pieces, Extra MASAMUNE, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　SSD-21

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Spiral Tap & Drill Set (26 Pieces, M4, M5, M6, Pilot Hole Drill: 3.4, 4.3mm 5.2)　ESD-26S

This is a set of spiral tap and hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Cobalt Jet Spiral Tap & Drill Set (21 Pieces, Extra MASAMUNE, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm)　JSD-21

This is a set of jet tap, spiral tap and bottom hole drill for general steel.
Work Material: General Steel.

ISHIHASHI SEIKO

Hand Tap & Drill Set (21 Pieces, Tap: M3 to M12, Pilot Hole Drill: 2.5 to 10.3mm) and others

ISHIHASHI SEIKO

HSS Drill (Fine Axis, MASAMUNE, type 6.5, 7.0 × Blade length 35 x Total length 75) and others

ISHIHASHI SEIKO

HSS Drill (Fine Axis, MASAMUNE, type 10, 11.0 × Blade length 50 x Total length 90) and others

ISHIHASHI SEIKO

HSS Drill (Fine Axis, MASAMUNE, 13, Φ14.0 × Blade length 85 × Total length 140mm) and others

ISHIHASHI SEIKO

HSS Drill (Hex-Axis, MASAMUNE, 2.0 × Blade length 29 x Total length 80) and others

ISHIHASHI SEIKO

High Drilling Set (Hex-Axis, MASAMUNE, 5 Pieces, Φ2.0 to 4.0mm (0.5mm) and others

ISHIHASHI SEIKO

Cobalt HSS Drill (Hex-Axis, MASAMUNE, 2.0 × Blade length 29 x Total length 80mm) and others

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Hex-Axis, Φ6.5 x Blade length 24 x Total length 80mm) and others

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Hex-Axis, TIN Coatinging, Φ6.5 x Blade length 24 x Total length 80mm) and others

ISHIHASHI SEIKO

Spot Cutter HSS Drill (Hex-Axis, TiAlN coating, Φ6.5 x Blade length 24 x Total length 80mm) and others

ISHIHASHI SEIKO

Spiral Tap (Metric Thread, M3 x 0.50, Screw Length: 18, Precision: H2) and others

ISHIHASHI SEIKO

Long Neck Spiral Tap (Metric Thread, L: 100, M3 x 0.5, Screw Length: 11, Precision: H2) and others

ISHIHASHI SEIKO

Spiral Tap (Metric Thread, Stainless Steel, M2.0 x 0.40, Screw Length: 11, Precision: H1) and others

ISHIHASHI SEIKO

Spiral Tap (Metric Thread, Cobalt HSS for Hard-To-Cut Material, M3 x 0.50, Screw Length: 18, Precision: H2) and others

ISHIHASHI SEIKO

Drilling Tap (Tap With Metric Thread Drill, HSS, Through Hole, M3 x 0.50, Screw Length: 5, Precision:-) and others

ISHIHASHI SEIKO

Jet Power Tap (Metric Thread) M2.0x0.40 Screw Length: 11 Accuracy: H1 and others

ISHIHASHI SEIKO

Jet Power Tap (Whit Thread) W1/8 Screw Length: 18 Accuracy: H2 and others

ISHIHASHI SEIKO

Jet Power Tap (Metric Thread) Long neck M3x0.5 Screw Length: 11 Accuracy: H2 Length: 100 and others

ISHIHASHI SEIKO

Long Jet Power Tap (Metric Thread) M3x0.50 Screw Length: 18 Accuracy: H2 Length: 100 and others

ISHIHASHI SEIKO

Jet Power Tap (Unified Screw) Coarse Thread UNC1/4 Screw Length: 24 Accuracy: H2 and others