Fujii Denko Co., Ltd.

Full harness safety belt for connecting Belt Yellow　NR-2-Y-HD

A connecting belt is attached to the D ring on the back of the Tuyorong Full Harness to facilitate attaching and detaching hooks such as safety blocks.
When not in use, it can be fixed to the shoulder of the full harness with a face fastener.

Fujii Denko Co., Ltd.

Full harness safety belt parts　R-26-45-HD

Hook hanger for shoulder belt 45 mm harness.
The hook hanger function can also hold the rope.

Fujii Denko Co., Ltd.

Safety belt Rope for Storage bag Blue and others

Fujii Denko Co., Ltd.

Safety belt Rope for Storage bag Blue and others

Fujii Denko Co., Ltd.

Up/down and position Working (b) lip 78 (b) Lip　78R-4-BP

It is a fall prevention device for lifting and setting work using vertical master rope.
With a constant position work changeover lever.

Fujii Denko Co., Ltd.

Screw Clamp Common type　NC-43-BX

This is a jig for quickly attaching a safety belt to a chunk-cut bolt on the ceiling for indoor stepladder work.
Can be installed and removed with the right hand.

Fujii Denko Co., Ltd.

Horizontal main rope tension 97 haripp Body Hook directly Rotation type　97HR-3-BP

You can easily install and release the horizontal master rope by hand.
Equipment for installing a temporary horizontal master rope in construction site plant construction.

Fujii Denko Co., Ltd.

Moving the main rope Rope 20 m and others

Fujii Denko Co., Ltd.

Rooftop Working janellopp type 300 1 set　YU-300-BX

It is a fall prevention device that can be easily installed in rooftop work such as low-rise houses.
Can be installed regardless of roof tiles.

Fujii Denko Co., Ltd.

Inclined surface Belt for yoke bracket　YS-1-BX

This metal fitting prevents the torso from tightening by the belt while working on an inclined surface.
Attach to the backside belt for use.

Fujii Denko Co., Ltd.

Inclined surface for (b) lip 1 suspension dedicated lanyard　KS21-1S-BX

Lolip body can be easily made by operating the lever.
It can be inserted into the parent rope.

Fujii Denko Co., Ltd.

Inclined surface for (b) Lip　KS21-1W-BX

Lolip body can be easily made by operating the lever.
It can be inserted into the parent rope.

Fujii Denko Co., Ltd.

Shield Block 4.5 m with table, pulling Rope and others

Fujii Denko Co., Ltd.

Belt retractable bell Block　BB-35-SN-90ST-BX

Small safety block for moving up and down.
The strap automatically follows when the worker moves.

Fujii Denko Co., Ltd.

Belt retractable bell Block mounting parts　DR-1000-BP

Use to attach the Tjolon safety block.
Easy to install with FS51 hook on one side and 50 mm fox course on the other.

Fujii Denko Co., Ltd.

Horizontal main rope tension with GC haripp 10 m and others

Fujii Denko Co., Ltd.

Full harness Hook for Hanger　R23-45-HD

The hook is hooked when the lanyard is not used.
Installation and removal is easy and always possible.

Fujii Denko Co., Ltd.

Ultra lock 25 m with table, drawing Rope and others

Fujii Denko Co., Ltd.

Connecting Belt For Full Harness Safety Belt Gray NR250DGHD　NR-2-50-DG-HD

Long size with 50 cm connecting belt length.
A connecting belt is attached to the D ring on the back of the full harness to facilitate attaching and detaching hooks such as safety blocks.

Fujii Denko Co., Ltd.

Connecting Belt For Full Harness Safety Belt Gray NR250YHD　NR-2-50-Y-HD

Long size with 50 cm connecting belt length.
A connecting belt is attached to the D ring on the back of the full harness to facilitate attaching and detaching hooks such as safety blocks.

Fujii Denko Co., Ltd.

Belblock　BB-80-SN-90ST-BX

The case uses fiberglass resin reinforced with an iron plate to resist impact and crack.
The strap is covered with super strong fiber and polyester.

Fujii Denko Co., Ltd.

Belblock　BB-60-SN-RC-BX

It comes with a rainproof cover, so you can use it even if it rains suddenly.
The case uses fiberglass resin reinforced with an iron plate to resist impact and crack.

Fujii Denko Co., Ltd.

Belblock　BB-80-BX

Comes with a shock absorber to reduce the impact in case of a crash.
The case uses fiberglass resin reinforced with an iron plate to resist impact and crack.

Fujii Denko Co., Ltd.

Belblock　BB-80-SN-RC-BX

The case uses fiberglass resin reinforced with an iron plate to resist impact and crack.
The strap is covered with high strength fiber and polyester.

Fujii Denko Co., Ltd.

hanger hook for tool　R-9L-HD

Convenient for hanging tools.

Fujii Denko Co., Ltd.

Main rope for strut: certified by the Temporary Industrial Association 10m and others

Fujii Denko Co., Ltd.

Full Harness　TH5062GB99OTDGL2R26BX

Y type full harness with wide tool mounting space at the body belt.
It is a horizontal thigh belt that increases the ease of movement because the left and right sides are independent.

Fujii Denko Co., Ltd.

Full Harness and others

Fujii Denko Co., Ltd.

Full Harness　TH-506-GB99-OT-DG-LL-R26-BX

Y type full harness with wide tool mounting space at the body belt.
It is a horizontal thigh belt that increases the ease of movement because the left and right sides are independent.

Fujii Denko Co., Ltd.

Full Harness　TH506NV93SVOTDGLLR23BX

Y type full harness with wide tool mounting space at the body belt.
It is a horizontal thigh belt that increases the ease of movement because the left and right sides are independent.

Fujii Denko Co., Ltd.

Full Harness and others

Fujii Denko Co., Ltd.

Full Harness and others

Fujii Denko Co., Ltd.

Smart Harness　THSM510TR93SVOTBLKLR23BX

Pads that maintain the shape are used on the back to prevent flipping and belt tangling, making it easy to wear.
Pads with excellent cushioning are provided as standard equipment to reduce biting of shoulder and thigh belts.

Fujii Denko Co., Ltd.

Positioning device for pole work (iron slide buckle)　WP-FC-110-BLK-M-BP

Replacement belt for pole safety belt.

Fujii Denko Co., Ltd.

Positioning device for pole work (iron slide buckle)　WP-FC-11-BLK-M-BP

A safety belt on a column suitable for work carried out in a U-shaped suspended state.

Fujii Denko Co., Ltd.

Positioning device for pole work (iron slide buckle) and others

Fujii Denko Co., Ltd.

Fall Prevention Device (body belt/explosion-proof type)　EA998FR-200

Ideal for work in areas where there is a risk of fire or explosion such as oil plants or aluminum dust.
The belt and rope are made of fibers that promote electric discharge.

Fujii Denko Co., Ltd.

Fall Prevention Device (body belt/Short Circuit Prevention Type)　EA998FR-201

The metal part is coated with resin to provide insulation, which prevents short circuits between terminals in work such as around telephone exchanges.
Easy-to-use large diameter hook with resin cover at the end of hook hook hook.

Fujii Denko Co., Ltd.

［Discontinued］Full harness safety belt and others

Fujii Denko Co., Ltd.

［Discontinued］Full harness safety belt and others