KYOCERA Corporation

Solid Endmill (2 Blades Medium, 2FESM, 2.6 × 8mm) and others

KYOCERA Corporation

Solid Endmill (For Finishing, 4 Blades, Φ1 × Blade length 2.5mm) and others

KYOCERA Corporation

Solid Endmill (Φ3 × Blade Length: 3mm) and others

KYOCERA Corporation

Carbide Radius Endmill (4 Blades, Corner radius: 0.2, Φ3 × Blade Length: 8mm) and others

KYOCERA Corporation

Carbide Solid Endmill (3 Blades, Φ6 × Blade Length: 24) and others

KYOCERA Corporation

Carbide Solid Endmill (4 Blades, Φ16 x Blade Length: 32) and others

KYOCERA Corporation

Carbide Solid Ball Endmill (5 Blades, Medium, Φ25 x Blade Length: 45)　5RDSM250-450-25

Sine curve-shaped cutting blade reduces cutting resistance and prevents burglary. Suitable for a wide range of steel, stainless steel and cast iron.
Work Material: Steel, Stainless Steel, Cast Iron.

KYOCERA Corporation

KYOCERA Holder (For Small Tools, Model Number: AABSR 1212 JX 40 F)　AABSR1212JX-40F

Rear clamp system.
For rake (outer diameter) processing.

KYOCERA Corporation

KYOCERA Holder (For Small Tools, Model Number: ACLCR 1616 JX09FF)　ACLCR1616JX-09FF

Rear clamp system.
For outer diameter and end face machining.

KYOCERA Corporation

KYOCERA Holder (For Small Tools, Model Number: ADJCR 1010 JX07FF)　ADJCR1010JX-07FF

Rear clamp system.
For outer diameter and copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A08XSWUBR0108AE)　A08X-SWUBR08-10AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSDUCR0714 AE)　A10LSDUCR0714AE

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSDZCR0714 AE)　A10L-SDZCR07-14AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSTLCL 1112 AE)　A10L-STLCL11-12AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSTLCR 0912 AE)　A10L-STLCR09-12AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSTLCR 1112 AE)　A10LSTLCR1112AE

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 10 LSWUBR0812AE)　A10L-SWUBR08-12AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSCLPLPL0814 AE)　A12M-SCLPL08-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSDQCR0716 AE)　A12M-SDQCR07-16AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSDZCR0716 AE)　A12M-SDZCR07-16AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSTLCL 1114 AE)　A12M-STLCL11-14AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSTLCR 1114 AE)　A12M-STLCR11-14AE

Screw clamp system.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSTLPL 1114 AE)　A12M-STLPL11-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter and inner end surface machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSVJCL 0816 AE)　A12M-SVJCL08-16AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSVZCR0816AE)　A12M-SVZCR08-16AE

Dynamic bar that achieves excellent chip discharge.
For pulling.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 12 MSWUPR 1114 AE)　A12M-SWUPR11-14AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDQCR0720 AE)　A16Q-SDQCR07-20AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDUCR0714 AE)　A16Q-SDUCR07-14AE

Dynamic bar that achieves excellent chip discharge.
For copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDUCR0720 AE)　A16Q-SDUCR07-20AE

Dynamic bar that achieves excellent chip discharge.
For copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDZCR0714 AE)　A16Q-SDZCR07-14AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDZCR0720 AE)　A16Q-SDZCR07-20AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSDZCR 1123 AE)　A16Q-SDZCR11-23AE

A-SDZC-AE type: Dynamic bar for excellent chip discharge.
Boring Bar

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSVJCL 0820 AE)　A16Q-SVJCL08-20AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSVJCR 0820 AE)　A16Q-SVJCR08-20AE

Screw clamp system.
For inner diameter spherical surface, inner end surface and copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSVZBR 1120 AE)　A16Q-SVZBR11-20AE

Dynamic bar that achieves excellent chip discharge.
For pulling.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSWUPR 1118 AE)　A16Q-SWUPR11-18AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 16 QSWUPR 1618 AE)　A16Q-SWUPR16-18AE

Dynamic bar that achieves excellent chip discharge.
For inner diameter machining.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 20 RSCLPL0922 AE)　A20RSCLPL0922AE

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 20 RSDQCR 1125 AE)　A20R-SDQCR11-25AE

Screw clamp system.
For copying.

KYOCERA Corporation

KYOCERA Holder (Inner Diameter Processing, Model Number: A 20 RSDUCR 1120 AE)　A20R-SDUCR11-20AE

Dynamic bar that achieves excellent chip discharge.
For copying.