絞り込み条件
全て解除
Clear
Refine by
Parts/Option for Bicycles[1]
Bicycle[82]
Sort by:
HOZAN TOOL INDUSTRIAL CO., LTD.
This product contains high-grade synthetic oil and ultrafine particle fluororesin (PTFE) powder with a diameter of 5 μm. After application, it quickly blends into the lubricated surface to enhance the lubrication effect.
1 products found
JPY: 1,770
USD: 11.10
Tool for turning nipples when assembling wheels and removing run-out.
JPY: 550
USD: 3.45
Grease ideal for ball bearings with high load such as head parts and BB.
JPY: 1,750
USD: 10.98
Lock ring attachment and detachment Tool for fixing chain case. Attaching the attached guide to the tip of the BB shaft enables stable work.
JPY: 8,240
USD: 51.69
a Tool used to replace a bicycle stand spring. Spring can be installed easily and quickly using the principle of leverage.
JPY: 1,120
USD: 7.03
Tool for replacing inward hook Type stand spring. The left side corresponds to the stand facing outward, and the right side corresponds to the stand facing inward.
JPY: 1,260
USD: 7.90
A special lubricant developed especially for bicycle chains in severe environments. Since the viscosity is low during application, it easily penetrates into every corner. After application, the solvent volatilizes and the viscosity increases, and the lubricant with high water resistance is fixed inside the roller.
JPY: 1,240
USD: 7.78
Ratchet Type hub lock nut wrench. Excellent for continuous work and can also be used for fixing bolts that fix cranks.
JPY: 5,340
USD: 33.50
Professional pedal wrench with chrome vanadium steel forging and parka finish. A combination of a thick Type with a 15° angle to the handle and a straight thin type.
JPY: 2,810
USD: 17.63
Lock ring pliers for head parts and bottom bracket (BB). Since it is a slip Joint system, it firmly catches large diameter lock rings.
JPY: 4,520
USD: 28.35
Lock ring wrench for bottom bracket (BB). *The right and left hooks are different in size. Please use according to the size of the lock ring.
JPY: 2,850
USD: 17.88
2 products found
JPY: 4,730-
USD: 29.67-
JPY: 1,550
USD: 9.72
Pedal wrench improved in durability by contacting hexagonal pedal shaft with surface. Strong Type with thick mouth combined with long handle.
JPY: 4,200
USD: 26.35
a Tool for cutting spokes. Designed with a blade width of 8.6 mm, even sports cars with narrow rims can be cut when assembled. Compatible with stainless steel spokes.
JPY: 4,750
USD: 29.80
Wires can be cut neatly without breaking apart. In addition to cutting inner and outer wires of brake shifters, it can also be used for cutting spokes.
JPY: 3,650
USD: 22.90
Shaft table that can handle a wide range of wheels, from fat bike wide wheels, large diameter wheels such as 29 "/ 700 C, and small diameter wheels such as running bikes. Composed of 42.7 mmφ steel pipe, it has excellent rigidity and stability.
JPY: 56,800
USD: 356.29
A Set of arms and contacts. By adding to C-300, run-out and distortion can be inspected from both sides of the rim.
JPY: 5,810
USD: 36.45
3 products found
JPY: 1,550-
USD: 9.72-
This gauge checks whether the center of the overlock nut dimension of the hub matches the center of the assembled rim. Align the center bolt (A) with the lock nut of the hub, and fix the lock bolt (B) so that the rim is in close contact with the body. Place the gauge on the opposite side of the rim and check the gap between the body, rim and hub.
JPY: 12,100
USD: 75.90
It is a Tool to measure and correct the parallelism between the derailleur directly attached part and the frame center plane.
JPY: 7,210
USD: 45.23
Drum attachment/detachment Tool for rear drum brakes such as city cycle. The long handle makes it possible to securely remove the tightly tightened drum.
JPY: 8,650
USD: 54.26
Note:There are two sizes of pins, old and new. The current Type is C-351.
JPY: 450
USD: 2.82
Pliers for tension adjustment when attaching inner wires such as brakes and derailleurs. Eliminates slack in the wire and enables reliable wire attachment.
JPY: 2,450
USD: 15.37
BB (cup & cone) right hanger one special tool. Unlike the wrench type, it can be securely attached and detached by pinching the right one from the left and right sides of the frame.
JPY: 15,700
USD: 98.48
It is compatible with the chains used in almost all bicycles on the market, from BMX, ordinary cars and electric assist cars to Shimano HG/IG/UG and Slam Campagnolo 12 S sports cars. By adopting a movable guide part, it is possible to work without changing the Setting of the Tool for each Type of chain. *Some parts cannot be operated due to the shape of the chain.
JPY: 9,200
USD: 57.71
It is compatible with the chains used in almost all bicycles on the market, from BMX, ordinary cars and electric assist cars to Shimano HG/IG/UG and Campagnolo 11 S sports cars.
Tap for correcting thread of pedal mounting hole of crank. Standard screws are BC9/16 (C-401), and thin shafts such as children's cars and BMX are BC1/2 (C-401 B).
JPY: 4,140
USD: 25.97
Bottom bracket (BB) thread fixing tap. Use by attaching a tap handle, etc. *Please check the right and left sides of the tap when using it.
Bottom bracket (BB) thread fixing tap. Since screw thread correction work is performed simultaneously on the left and right through the guide, accurate centering can be performed. *Please check the right and left sides of the tap when using it.
JPY: 68,600
USD: 430.31
Bottom bracket (BB) thread fixing tap. Since screw thread correction work is performed simultaneously on the left and right through the guide, accurate centering can be performed.
JPY: 51,800
USD: 324.93
Italian size bottom bracket shell correction tap for C-405 only. *You need two to use it.
JPY: 31,800
USD: 199.47
A die for correcting threads of hub shafts. With front and rear wheel dies.
JPY: 8,320
USD: 52.19
JPY: 2,380-
USD: 14.93-
JPY: 15,400-
USD: 96.60-
JPY: 10,500-
USD: 65.86-
Ball lace can be press fitted quickly and easily. Standard and over-sized by replacing the included adapter ring.
JPY: 11,000
USD: 69.00
Hold the ball race pressed into the fork column at 6 points. Remove without damaging forks and ball laces. Note:It may not be removable if there is no gap for the blade.
JPY: 45,100
USD: 282.90
Extension Pipe for C-440. Multiple connections can be made to support special fork column lengths.
JPY: 8,270
USD: 51.88
Attachment Set for C-445. Corresponds to 1 "and 1-1/8" (special).
JPY: 6,140
USD: 38.52
