HOZAN TOOL INDUSTRIAL CO., LTD.

Mobile workbench　Z-101

With Work Mat (Fixed)
With 4 Casters (Including 2 with 65 mmφ/Stopper)

HOZAN TOOL INDUSTRIAL CO., LTD.

Bike Lubricant　C-10

This product contains high-grade synthetic oil and ultrafine particle fluororesin (PTFE) powder with a diameter of 5 μm. After application, it quickly blends into the lubricated surface to enhance the lubrication effect.

HOZAN TOOL INDUSTRIAL CO., LTD.

Nipple Turner　C-120

Tool for turning nipples when assembling wheels and removing run-out.

HOZAN TOOL INDUSTRIAL CO., LTD.

Li-Ca Grease　C-13

Grease ideal for ball bearings with high load such as head parts and BB.

HOZAN TOOL INDUSTRIAL CO., LTD.

All Case Lock Ring Tools　C-135

Lock ring attachment and detachment Tool for fixing chain case.
Attaching the attached guide to the tip of the BB shaft enables stable work.

HOZAN TOOL INDUSTRIAL CO., LTD.

Stand Spring Holder　C-141

a Tool used to replace a bicycle stand spring. Spring can be installed easily and quickly using the principle of leverage.

HOZAN TOOL INDUSTRIAL CO., LTD.

Stand Spring Holder　C-142

Tool for replacing inward hook Type stand spring.
The left side corresponds to the stand facing outward, and the right side corresponds to the stand facing inward.

HOZAN TOOL INDUSTRIAL CO., LTD.

Chain Lubricant　C-15

A special lubricant developed especially for bicycle chains in severe environments.
Since the viscosity is low during application, it easily penetrates into every corner. After application, the solvent volatilizes and the viscosity increases, and the lubricant with high water resistance is fixed inside the roller.

HOZAN TOOL INDUSTRIAL CO., LTD.

Ratchet Wrench for Wheel Industry　C-160

Ratchet Type hub lock nut wrench.
Excellent for continuous work and can also be used for fixing bolts that fix cranks.

HOZAN TOOL INDUSTRIAL CO., LTD.

Pedal Wrench　C-200

Professional pedal wrench with chrome vanadium steel forging and parka finish.
A combination of a thick Type with a 15° angle to the handle and a straight thin type.

HOZAN TOOL INDUSTRIAL CO., LTD.

Double-ended Head Turner　C-203

Lock ring pliers for head parts and bottom bracket (BB).
Since it is a slip Joint system, it firmly catches large diameter lock rings.

HOZAN TOOL INDUSTRIAL CO., LTD.

S Type Head Turner　C-205

Lock ring wrench for bottom bracket (BB).
*The right and left hooks are different in size. Please use according to the size of the lock ring.

HOZAN TOOL INDUSTRIAL CO., LTD.

BB Tools and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Guide　C-207-1

HOZAN TOOL INDUSTRIAL CO., LTD.

Pedal Wrench　C-210

Pedal wrench improved in durability by contacting hexagonal pedal shaft with surface.
Strong Type with thick mouth combined with long handle.

HOZAN TOOL INDUSTRIAL CO., LTD.

Spoke Cut　C-216

a Tool for cutting spokes. Designed with a blade width of 8.6 mm, even sports cars with narrow rims can be cut when assembled.
Compatible with stainless steel spokes.

HOZAN TOOL INDUSTRIAL CO., LTD.

Wire Cutter　C-217

Wires can be cut neatly without breaking apart.
In addition to cutting inner and outer wires of brake shifters, it can also be used for cutting spokes.

HOZAN TOOL INDUSTRIAL CO., LTD.

Shaking Table　C-300

Shaft table that can handle a wide range of wheels, from fat bike wide wheels, large diameter wheels such as 29 "/ 700 C, and small diameter wheels such as running bikes.
Composed of 42.7 mmφ steel pipe, it has excellent rigidity and stability.

HOZAN TOOL INDUSTRIAL CO., LTD.

Lateral run-out contact Set　C-300-1

A Set of arms and contacts.
By adding to C-300, run-out and distortion can be inspected from both sides of the rim.

HOZAN TOOL INDUSTRIAL CO., LTD.

Attachment for axle Hub and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Rim Center Gauge　C-335

This gauge checks whether the center of the overlock nut dimension of the hub matches the center of the assembled rim.
Align the center bolt (A) with the lock nut of the hub, and fix the lock bolt (B) so that the rim is in close contact with the body. Place the gauge on the opposite side of the rim and check the gap between the body, rim and hub.

HOZAN TOOL INDUSTRIAL CO., LTD.

Derailleur Gauge　C-336

It is a Tool to measure and correct the parallelism between the derailleur directly attached part and the frame center plane.

HOZAN TOOL INDUSTRIAL CO., LTD.

Drum Puller　C-349

Drum attachment/detachment Tool for rear drum brakes such as city cycle.
The long handle makes it possible to securely remove the tightly tightened drum.

HOZAN TOOL INDUSTRIAL CO., LTD.

Replacement Pin　C-351

Note:There are two sizes of pins, old and new. The current Type is C-351.

HOZAN TOOL INDUSTRIAL CO., LTD.

Inner Wire Pliers　C-356

Pliers for tension adjustment when attaching inner wires such as brakes and derailleurs.
Eliminates slack in the wire and enables reliable wire attachment.

HOZAN TOOL INDUSTRIAL CO., LTD.

Turning the Right Hanger One　C-358

BB (cup & cone) right hanger one special tool.
Unlike the wrench type, it can be securely attached and detached by pinching the right one from the left and right sides of the frame.

HOZAN TOOL INDUSTRIAL CO., LTD.

Chain Cutter　C-371

It is compatible with the chains used in almost all bicycles on the market, from BMX, ordinary cars and electric assist cars to Shimano HG/IG/UG and Slam Campagnolo 12 S sports cars.
By adopting a movable guide part, it is possible to work without changing the Setting of the Tool for each Type of chain. *Some parts cannot be operated due to the shape of the chain.

HOZAN TOOL INDUSTRIAL CO., LTD.

Replacement Arrow for C-371　C-371-1

It is compatible with the chains used in almost all bicycles on the market, from BMX, ordinary cars and electric assist cars to Shimano HG/IG/UG and Campagnolo 11 S sports cars.

HOZAN TOOL INDUSTRIAL CO., LTD.

Pedal Tap　C-401

Tap for correcting thread of pedal mounting hole of crank.
Standard screws are BC9/16 (C-401), and thin shafts such as children's cars and BMX are BC1/2 (C-401 B).

HOZAN TOOL INDUSTRIAL CO., LTD.

Hanger Tap　C-402

Bottom bracket (BB) thread fixing tap. Use by attaching a tap handle, etc.
*Please check the right and left sides of the tap when using it.

HOZAN TOOL INDUSTRIAL CO., LTD.

R/L Uniaxial BB Tap　C-405

Bottom bracket (BB) thread fixing tap. Since screw thread correction work is performed simultaneously on the left and right through the guide, accurate centering can be performed.
*Please check the right and left sides of the tap when using it.

HOZAN TOOL INDUSTRIAL CO., LTD.

Screw thread correcting tap　C-405-1

Bottom bracket (BB) thread fixing tap.
Since screw thread correction work is performed simultaneously on the left and right through the guide, accurate centering can be performed.

HOZAN TOOL INDUSTRIAL CO., LTD.

Tap for C-405　C-405-2

Italian size bottom bracket shell correction tap for C-405 only.
*You need two to use it.

HOZAN TOOL INDUSTRIAL CO., LTD.

Hub Shaft Die　C-406

A die for correcting threads of hub shafts. With front and rear wheel dies.

HOZAN TOOL INDUSTRIAL CO., LTD.

Replacement Piece for C-406 and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Fork Die Set and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Die and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Hawk lower ball push slide hammer　C-435

Ball lace can be press fitted quickly and easily.
Standard and over-sized by replacing the included adapter ring.

HOZAN TOOL INDUSTRIAL CO., LTD.

Head One Punch and others

HOZAN TOOL INDUSTRIAL CO., LTD.

Ball Lace Remover　C-440

Hold the ball race pressed into the fork column at 6 points. Remove without damaging forks and ball laces.
Note:It may not be removable if there is no gap for the blade.