78-0181-70 ［Discontinued］Ball Valve for Refrigerator 3/8" EA496-3
Features
- The ball sealing material is made of Teflon with carbon. Improves strength and sealability.
- [Installation method] (1) Be sure to fully open the valve before brazing. ② Please remove the seal cap and gasket. ③ To protect the parts inside the valve from heat damage, wrap them with a wet cloth. ④ Do not braze both ends at the same time. After brazing one side, cool it with a wet cloth until the valve body can be touched by hand, then braze the other side. ⑤ Please remove the wet cloth after the whole area has cooled sufficiently. ⑥ Use common silver wax and flux for brazing. (Do not apply the flame directly to the valve.) ⑦ During the brazing process, please blow nitrogen.
- This product can be used with both gas and liquid refrigerant pipes in high and low pressure pipes.
- Two O-ring stem seals strongly seal.
- Double seal with rubber gasket in seal cap.
- When internal pressure presses on the stem, the nylon washer works to reduce friction.
- The direction of fluid use is indicated by an arrow on the side of the ball valve body.
- Align the stem arrow with the flow direction to open it, or at right angles to the flow direction to close it.
- When brazing, to protect the internal components, wrap a wet cloth to reduce heat.
Spec
- Applicable refrigerant： CFC, HCFC, HFC
- Max. operating pressure： 4.8MPa
- Connection-Brazed
- The ball seal material is carbon added teflon. Strength and sealing performance is improved.
- 1/4Full open/full close by lever turning (90°)
- Copper tube： 3/8
- Full length： 140mm
Package size：75×40×167 mm 330 g [About Package size]
| Order No. | 78-0181-70 | |
|---|---|---|
| Model No. | EA496-3 | |
| JAN Code | 4518340024564 | |
| Standard price |
JPY: 9,170
USD: 57.52
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
|
||
| Stock in Japan | - | |
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
78-0181-69 | ［Discontinued］Ball Valve for Refrigerator 1/4" EA496-2 | EA496-2 | 1piece | JPY: 5,980 | USD: 37.51 |
-
|
|
 |
78-0181-70 | ［Discontinued］Ball Valve for Refrigerator 3/8" EA496-3 | EA496-3 | 1piece | JPY: 9,170 | USD: 57.52 |
-
|
|
 |
78-0181-71 | ［Discontinued］Ball Valve for Refrigerator 1/2" EA496-4 | EA496-4 | 1piece | JPY: 5,900 | USD: 37.01 |
-
|
|
 |
78-0181-72 | ［Discontinued］Ball Valve for Refrigerator 5/8" EA496-5 | EA496-5 | 1piece | JPY: 5,790 | USD: 36.32 |
-
|
|
 |
78-0181-73 | ［Discontinued］Ball Valve for Refrigerator 3/4" EA496-6 | EA496-6 | 1piece | JPY: 8,800 | USD: 55.20 |
-
|
|
 |
78-0181-75 | ［Discontinued］Ball Valve for Refrigerator 1・1/8" EA496-11 | EA496-11 | 1piece | JPY: 12,700 | USD: 79.66 |
-
|
