69-8624-40 Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-3HS-FLSTEELFKM
Features
- Simultaneously connect multiple pipes in one connection operation. Supports high-pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 8 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Socket
- MALC-2~6HS-FL Model (Flange Fixed Type for High Pressure)
- Mass (g): 200
- Dimension (L1) (mm): (51)
- Dimension (L2) (mm): (26)
- Dimension (L3) (mm): 6
- Dimensions (□S) (mm): 45
- Maximum Working Pressure: 21.0 MPa{214kgf/cm2} (Single Unit/8.0 MPa{81kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluid: hydraulic fluid
- Body Material: Special Steel (Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 31.5 MPa{321kgf/cm2} (Single Unit/12.0 MPa{122kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 9 N · m{91kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 87 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.26 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.26 mL * Varies according to operating conditions
- Maximum connection holding force: 22000 N{2244kgf}
- Minimum Connection Holding Force Calculated *: P×460+190 N{p×4.6+19kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| Order No. | 69-8624-40 | |
|---|---|---|
| Model No. | MALC-3HS-FLSTEELFKM | |
| JAN Code | 4992338116620 | |
| Standard price |
JPY: 32,000
USD: 200.59
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8624-39 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-2HS-FLSTEELFKM | MALC-2HS-FLSTEELFKM | 1piece | JPY: 26,900 | USD: 168.62 |
|
|
 |
69-8624-40 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-3HS-FLSTEELFKM | MALC-3HS-FLSTEELFKM | 1piece | JPY: 32,000 | USD: 200.59 |
|
|
 |
69-8624-41 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-4HS-FLSTEELFKM | MALC-4HS-FLSTEELFKM | 1piece | JPY: 39,900 | USD: 250.11 |
|
|
 |
69-8624-42 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-6HS-FLSTEELFKM | MALC-6HS-FLSTEELFKM | 1piece | JPY: 49,200 | USD: 308.41 |
|
|
 |
69-8624-43 | Multi-Coupler MALC-HSP Model (Socket) STEEL Single Unit Flange Fixed MALC-8HS-FLSTEELFKM | MALC-8HS-FLSTEELFKM | 1piece | JPY: 61,800 | USD: 387.39 |
|