69-8624-34 Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M20 x 1.5 MALC-2HPSTEELFKM
Features
- Simultaneously connect multiple pipes in one connection operation. Supports high-pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 8 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Plug
- MALC-1~8HP Type (High Pressure Screw Fixing Type)
- Mass (g): 73
- Dimension (L1) (mm): 33
- Dimension (L2) (mm): (20)
- Dimension (L3) (mm): 13
- Dimension (φD) (mm): 28
- Dimensions (H) (mm): Hex 26
- Dimensions (T) (mm): M20 x 1.5
- Maximum Working Pressure: 21.0 MPa{214kgf/cm2} (Single Unit/8.0 MPa{81kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluid: hydraulic fluid
- Body Material: Special Steel (Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 31.5 MPa{321kgf/cm2} (Single Unit/12.0 MPa{122kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 50 N · m{510kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 49.5 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 0.14 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 0.14 mL * Varies according to operating conditions
- Maximum connection holding force: 16500 N{1683kgf}
- Minimum Connection Holding Force Calculated *: P×345+180 N{p×3.45+18kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| Order No. | 69-8624-34 | |
|---|---|---|
| Model No. | MALC-2HPSTEELFKM | |
| JAN Code | 4992338084004 | |
| Standard price |
JPY: 13,260
USD: 82.50
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8624-33 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M16 x 1 MALC-1HPSTEELFKM | MALC-1HPSTEELFKM | 1piece | JPY: 11,420 | USD: 71.06 |
|
|
 |
69-8624-34 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M20 x 1.5 MALC-2HPSTEELFKM | MALC-2HPSTEELFKM | 1piece | JPY: 13,260 | USD: 82.50 |
|
|
 |
69-8624-35 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M24 x 1.5 MALC-3HPSTEELFKM | MALC-3HPSTEELFKM | 1piece | JPY: 16,780 | USD: 104.41 |
|
|
 |
69-8624-36 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M35 x 1.5 MALC-4HPSTEELFKM | MALC-4HPSTEELFKM | 1piece | JPY: 21,200 | USD: 131.91 |
|
|
 |
69-8624-37 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M40 x 2 MALC-6HPSTEELFKM | MALC-6HPSTEELFKM | 1piece | JPY: 26,800 | USD: 166.75 |
|
|
 |
69-8624-38 | Multi-Coupler MALC-HSP Model (Plug) STEEL Single Unit Male Screw M45 x 2 MALC-8HPSTEELFKM | MALC-8HPSTEELFKM | 1piece | JPY: 33,200 | USD: 206.57 |
|