69-8624-06 Multicoupler MALC Model (Socket) SUS Single Unit Rc2 MALC-12S-16FSUSFKM
Features
- Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
- Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate varies depending on the size.)
- Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
- Special valve shape allows pressurized connection up to 1.5 MPa.
- Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
- Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.
Spec
- Socket
- MALC-8/12 S Type (Snap Ring Fixed Type for Medium Pressure)
- Mass (g): 2579
- Dimension (L1) (mm): (123)
- Dimension (L2) (mm): 85
- Dimension (L3) (mm): (18)
- Dimension (φD) (mm): 84
- Dimensions (H) (mm): two-sided 71
- Dimension (T) (mm): Rc2
- Maximum Working Pressure: 1.5 MPa{15kgf/cm2} (Single Unit/1.5 MPa{15kgf/cm2})
- Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
- Applicable fluids: water, hydraulic fluid, air
- Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
- Withstand Pressure: 2.3 MPa{23kgf/cm2} (Single Unit/2.3 MPa{23kgf/cm2})
- Seal Material: Fluororubber (FKM)
- Operating temperature range *: -20 to +180°C
- *The available temperature range depends on the operating conditions.
- Recommended maximum tightening torque: 350 N · m{3570kgf · cm}
- Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
- Minimum cross-sectional area: 795 mm2
- Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
- Amount of air mixed at the time of connection: 1.46 mL * Varies depending on operating conditions
- Amount of liquid dripping at the time of separation: 1.46 mL * Varies according to operating conditions
- Maximum connection holding force: 8200 N{837kgf}
- Minimum Connection Holding Force Calculated *: P×2260+400 N{p×22.6+40kgf}
- *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
| Order No. | 69-8624-06 | |
|---|---|---|
| Model No. | MALC-12S-16FSUSFKM | |
| JAN Code | 4992338609931 | |
| Standard price |
JPY: 192,900
USD: 1,200.22
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-8624-04 | Multicoupler MALC Model (Socket) SUS Single Unit Rc1 1/4 MALC-8S-10FSUSFKM | MALC-8S-10FSUSFKM | 1piece | JPY: 91,500 | USD: 569.31 |
|
|
 |
69-8624-05 | Multicoupler MALC Model (Socket) SUS Single Unit Rc1 1/2 MALC-12S-FSUSFKM | MALC-12S-FSUSFKM | 1piece | JPY: 190,800 | USD: 1,187.16 |
|
|
 |
69-8624-06 | Multicoupler MALC Model (Socket) SUS Single Unit Rc2 MALC-12S-16FSUSFKM | MALC-12S-16FSUSFKM | 1piece | JPY: 192,900 | USD: 1,200.22 |
|