NITTO KOHKI CO., LTD.

69-8624-01　Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M40 x 2　MALC-6SSUSFKM

Name: 69-8624-01 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M40 x 2 MALC-6SSUSFKM
Price: 281.45 USD

Check the Series Lineup

Products Information

Features

Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
Special valve shape allows pressurized connection up to 2 MPa.
Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.

Spec

Socket
MALC-1~12 S Model (Medium Pressure Screw Fixing Type)
Mass (g): 471
Dimension (L1) (mm): (78.5)
Dimension (L2) (mm): (47.5)
Dimension (L3) (mm): 17
Dimension (φD) (mm): 50
Dimensions (H) (mm): Hex 46
Dimensions (T) (mm): M40 x 2
Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
Applicable fluids: water, hydraulic fluid, air
Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
Seal Material: Fluororubber (FKM)
Operating temperature range *: -20 to +180°C
*The available temperature range depends on the operating conditions.
Recommended maximum tightening torque: 60 N · m{612kgf · cm}
Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
Minimum cross-sectional area: 227 mm2
Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
Amount of air mixed at the time of connection: 0.95 mL * Varies depending on operating conditions
Amount of liquid dripping at the time of separation: 0.95 mL * Varies according to operating conditions
Maximum connection holding force: 14000 N{1427kgf}
Minimum Connection Holding Force Calculated *: P×1160+260 N{p×11.6+26kgf}
*Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.

Order No.	69-8624-01
Model No.	MALC-6SSUSFKM
JAN Code	4992338116507
Standard price	JPY: 44,900 USD: 281.45 Excange rate 1USD= 159.53JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Order No.	Name	Model No.	Quantity	Standard price	Valid price in Japan
69-8623-96	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M16 x 1　MALC-1SSUSFKM	MALC-1SSUSFKM	1piece	JPY: 21,500	USD: 134.77
69-8623-97	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M20 x 1.5　MALC-2SSUSFKM	MALC-2SSUSFKM	1piece	JPY: 23,900	USD: 149.82
69-8623-98	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M24 x 1.5　MALC-3SSUSFKM	MALC-3SSUSFKM	1piece	JPY: 29,200	USD: 183.04
69-8623-99	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M35 x 1.5　MALC-4SSUSFKM	MALC-4SSUSFKM	1piece	JPY: 36,200	USD: 226.92
69-8624-01	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M40 x 2　MALC-6SSUSFKM	MALC-6SSUSFKM	1piece	JPY: 44,900	USD: 281.45
69-8624-02	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M45 x 2　MALC-8SSUSFKM	MALC-8SSUSFKM	1piece	JPY: 56,000	USD: 351.03
69-8624-03	Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M60 x 2　MALC-12SSUSFKM	MALC-12SSUSFKM	1piece	JPY: 139,300	USD: 873.19