Spec

• Socket
• SN-BL Type (For Mounting Urethane Hose)
• Opposing Hose Size: φ8 x φ12
• Mass (g): 120
• Dimensions (L) (mm): (61.5)
• Dimension (φD) (mm): (26.5)
• Dimension (φB) (mm): 7.5
• Dimensions (H) (mm): Hex 19
• Dimensions (T) (mm): Hex 19
• Maximum working pressure: 1.5 MPa{15kgf/cm2}
• Valve structure: One-way switching type
• Applicable Fluid: Air
• Body Material: Steel (Chrome Plating)
• Withstand Pressure: 2.0 MPa{20kgf/cm2}
• Seal Material: Nitrile Rubber (NBR)
• Standard Material
• Operating temperature range *: -20 to +60°C
• *The available temperature range depends on the operating conditions.
• Recommended tightening torque range: 9~11 N · m{92~112kgf · cm}
• *For urethane hose mounting, tighten the nut to the end.
• *For mounting steel urethane hoses, it is recommended to apply mineral oil grease GRE-M1 to the inner diameter of the nut (screw part and hose contact part) to facilitate tightening.
• Compatibility
• Can be connected to Type 10, Type 17, Type 20, Type 30 and Type 40 of "High Coupler."
• It can be connected to each product of "High Coupler" series (excluding 400, 600 and 800 types) and "Nut Coupler" series.
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
•