69-0536-28 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D1235
Features
- High speed end deflector system
- The Compact FA Series was introduced as standard stock to meet various needs.
- Quiet
- We have achieved a reduction of 6dB (A), which is equivalent to approximately half of the audibility.
- Compact
- The nut outer diameter has been reduced by up to 30% (compared to the manufacturer).
- A wide range of equipment and devices can be designed to be compact, including a thinner XY table.
- Fast
- The maximum allowable rotation speed is 5000min-1, and the range of operating conditions is greatly expanded.
- Grease nipple included as standard
- Comes standard with a grease nipple (M5 x 0.8) and has 2 oil filler openings for ease of use. Connection with centralized piping is also easy.
- storage rail
- Uses a storage seal, and has a more compact design compared to tube type nuts.
- low-profile design
- The compact FA type is equipped with a dedicated low-end support unit, allowing for an unparalleled low-end design.
- Easy stroke setting
- By fitting the support side support unit into the outer diameter of the ball screw on the opposite fixed side, flexible stroke installation of the fixed-support structure is possible.
- A dedicated support unit for the support side is available.
Spec
- Thread Outer Diameter d: 20
- Lead l: 30
- Stroke Nominal: 1000
- Stroke Max Lt-L: 1034
- Nut Total Length L: 74
- Thread Shaft Dimension Lt: 1108
- Thread Shaft Dimension La: 1135
- Thread Shaft Dimension L0:1235
- Thread Shaft Dimension L1:27
- Read accuracy target value T: 0
- Read accuracy error ep: 0.046
- Read accuracy variation vu: 0.030
- Basic load rating (N) Dynamic rating Ca: 5900
- Basic load rating (N) Static rating C0a: 11700
- Allowable Speed (min-1) Fixed - Supported: 2100
- Allowable Speed (min-1) Fixed - Fixed: 3000
- Left side shaft end type (anti-drive side): Type I
- *There is a separate shipping charge for this item.
| Order No. | 69-0536-28 | |
|---|---|---|
| Model No. | PSS2030N1D1235 | |
| Standard price |
JPY: 176,000
USD: 1,104.00
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
69-0536-25 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D0808 | PSS2030N1D0808 | 1piece | JPY: 139,000 | USD: 871.91 |
|
|
![]() |
69-0536-26 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D0908 | PSS2030N1D0908 | 1piece | JPY: 149,000 | USD: 934.64 |
|
|
![]() |
69-0536-27 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D1035 | PSS2030N1D1035 | 1piece | JPY: 158,000 | USD: 991.09 |
|
|
![]() |
69-0536-28 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D1235 | PSS2030N1D1235 | 1piece | JPY: 176,000 | USD: 1,104.00 |
|
|
![]() |
69-0536-29 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2030N1D1435 | PSS2030N1D1435 | 1piece | JPY: 198,000 | USD: 1,242.00 |
|












