68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
FeaturesFeatures class="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
SpecSpec class="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
Order No.Order No.ss="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
アズワン品番
68-5785-97
Model No.
KLN10-020CE
標準価格
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockSupplier Stock"init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
アズワン品番
68-5785-97
型番
KLN10-020CE
標準価格
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
Product Variations (Different Sizes, Specifications, Optional Products, etc.)ASONEs="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
Features
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
Spec
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
Order No.
68-5785-97
Model No.
KLN10-020CE
Standard price
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
68-5785-87
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 6 mm KLN06-010CE
KLN06-010CE
1piece
JPY: 960
USD: 5.97
68-5785-89
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 6 mm KLN06-020CE
KLN06-020CE
1piece
JPY: 1,080
USD: 6.72
68-5785-92
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 8 mm KLN08-010CE
KLN08-010CE
1piece
JPY: 1,080
USD: 6.72
68-5785-94
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 8 mm KLN08-020CE
KLN08-020CE
1piece
JPY: 1,080
USD: 6.72
68-5785-97
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
KLN10-020CE
1piece
JPY: 1,130
USD: 7.03
68-5785-99
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-030CE
KLN10-030CE
1piece
JPY: 1,220
USD: 7.59
68-5786-09
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-020CE
KLN12-020CE
1piece
JPY: 1,220
USD: 7.59
68-5786-11
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-030CE
KLN12-030CE
1piece
JPY: 1,220
USD: 7.59
68-5786-13
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-040CE
KLN12-040CE
1piece
JPY: 1,630
USD: 10.14
68-5786-27
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 16 mm KLN16-040CE
KLN16-040CE
1piece
JPY: 1,630
USD: 10.14
68-5786-34
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 20 mm KLN20-060CE
KLN20-060CE
1piece
JPY: 2,360
USD: 14.68
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
SpecSpec class="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
Order No.Order No.ss="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
アズワン品番
68-5785-97
Model No.
KLN10-020CE
標準価格
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockSupplier Stock"init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
アズワン品番
68-5785-97
型番
KLN10-020CE
標準価格
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
Product Variations (Different Sizes, Specifications, Optional Products, etc.)ASONEs="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
Features
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
Spec
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
-
Order No.
68-5785-97
Model No.
KLN10-020CE
Standard price
JPY: 1,130
USD: 7.03
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
68-5785-87
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 6 mm KLN06-010CE
KLN06-010CE
1piece
JPY: 960
USD: 5.97
68-5785-89
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 6 mm KLN06-020CE
KLN06-020CE
1piece
JPY: 1,080
USD: 6.72
68-5785-92
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 8 mm KLN08-010CE
KLN08-010CE
1piece
JPY: 1,080
USD: 6.72
68-5785-94
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 8 mm KLN08-020CE
KLN08-020CE
1piece
JPY: 1,080
USD: 6.72
68-5785-97
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
KLN10-020CE
1piece
JPY: 1,130
USD: 7.03
68-5785-99
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-030CE
KLN10-030CE
1piece
JPY: 1,220
USD: 7.59
68-5786-09
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-020CE
KLN12-020CE
1piece
JPY: 1,220
USD: 7.59
68-5786-11
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-030CE
KLN12-030CE
1piece
JPY: 1,220
USD: 7.59
68-5786-13
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 12 mm KLN12-040CE
KLN12-040CE
1piece
JPY: 1,630
USD: 10.14
68-5786-27
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 16 mm KLN16-040CE
KLN16-040CE
1piece
JPY: 1,630
USD: 10.14
68-5786-34
CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 20 mm KLN20-060CE
KLN20-060CE
1piece
JPY: 2,360
USD: 14.68
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KLN
- shapes: elbow nipples
- Applicable Pipe Outer Diameter A (mm): 10
- T:R1/4
- E(mm):8
- E1(mm):7
- G(mm):6.01
- Dihedral width h (mm): 14
- Hex Opposite Side H (mm): 17
- I(mm):5.5
- l(mm):20
- Hand Tightening L (mm): Approx. 30
- Hand Tightening L1 (mm): Approx. 18
- Weight (kg): 0.046
Order No.Order No.ss="init">
68-5785-97 CE Type Steel Pipe Penetration Joint Elbow Nipple KLN 10 mm KLN10-020CE特徴
仕様
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|