68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
Features
- The BI-Lok joint is a mechanical joint with two ferrules.
- Features of Double Ferrule Type Joints
- By simply tightening the nut, the back ferrule holds the pipe and the front ferrule seals the fluid.
- Since all wetted parts are made of the same material, it can reliably seal a wide temperature range and various fluids from low to high temperatures.
- Features of BI-LOK joints
- The BI-LOK fitting consists of four points: body, nut, front ferrule, and back ferrule.
- The front ferrule is pressed against the main body and tube to seal the fluid in the tube, and the back ferrule is pressed against the tube to lightly bite into the tube to prevent the tube from slipping out. This is the biggest feature that is different from the single sleeve.
- When the nut is tightened with a spanner from the finger tightening position, the front ferrule is deformed along the tapered surface of the main body, and after the sealing mechanism is completed by surface contact, the back ferrule is deformed along the tapered surface of the rear end of the front ferrule, and is strongly pressed against the tube surface.1
- Complete by tightening 1/4 turn (size 1/4OD and 6 mm or more).
- The front ferrule has excellent corrosion resistance.
- The blade edge of the back ferrule is hardened to a hardness greater than the surface of the tube.
SpecSpec class="init">
68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
特徴
- The BI-Lok joint is a mechanical joint with two ferrules.
- Features of Double Ferrule Type Joints
- By simply tightening the nut, the back ferrule holds the pipe and the front ferrule seals the fluid.
- Since all wetted parts are made of the same material, it can reliably seal a wide temperature range and various fluids from low to high temperatures.
- Features of BI-LOK joints
- The BI-LOK fitting consists of four points: body, nut, front ferrule, and back ferrule.
- The front ferrule is pressed against the main body and tube to seal the fluid in the tube, and the back ferrule is pressed against the tube to lightly bite into the tube to prevent the tube from slipping out. This is the biggest feature that is different from the single sleeve.
- When the nut is tightened with a spanner from the finger tightening position, the front ferrule is deformed along the tapered surface of the main body, and after the sealing mechanism is completed by surface contact, the back ferrule is deformed along the tapered surface of the rear end of the front ferrule, and is strongly pressed against the tube surface.1
- Complete by tightening 1/4 turn (size 1/4OD and 6 mm or more).
- The front ferrule has excellent corrosion resistance.
- The blade edge of the back ferrule is hardened to a hardness greater than the surface of the tube.
仕様
- series: BI-Lok fittings (metric series)
- Type: DOF-M
- Shape: Front ferrule
- Applicable Tube Outer Diameter A (mm): 8
-
Order No.
68-5782-35
型番
DOF8M-SS
標準価格
JPY: 300
USD: 1.88
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
68-5782-27
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 10 mm DOF10M-SS
DOF10M-SS
1piece
JPY: 300
USD: 1.88
68-5782-28
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 12 mm DOF12M-SS
DOF12M-SS
1piece
JPY: 410
USD: 2.57
68-5782-30
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 16 mm DOF16M-SS
DOF16M-SS
1piece
JPY: 470
USD: 2.95
68-5782-31
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 4 mm DOF4M-SS
DOF4M-SS
1piece
JPY: 300
USD: 1.88
68-5782-33
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 6 mm DOF6M-SS
DOF6M-SS
1piece
JPY: 250
USD: 1.57
68-5782-35
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
DOF8M-SS
1piece
JPY: 300
USD: 1.88
This page is the page of BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.2-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS 【AXEL GLOBAL】ASONE
Contact us
IHARA SCIENCE CORPORATION
68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
Features
- The BI-Lok joint is a mechanical joint with two ferrules.
- Features of Double Ferrule Type Joints
- By simply tightening the nut, the back ferrule holds the pipe and the front ferrule seals the fluid.
- Since all wetted parts are made of the same material, it can reliably seal a wide temperature range and various fluids from low to high temperatures.
- Features of BI-LOK joints
- The BI-LOK fitting consists of four points: body, nut, front ferrule, and back ferrule.
- The front ferrule is pressed against the main body and tube to seal the fluid in the tube, and the back ferrule is pressed against the tube to lightly bite into the tube to prevent the tube from slipping out. This is the biggest feature that is different from the single sleeve.
- When the nut is tightened with a spanner from the finger tightening position, the front ferrule is deformed along the tapered surface of the main body, and after the sealing mechanism is completed by surface contact, the back ferrule is deformed along the tapered surface of the rear end of the front ferrule, and is strongly pressed against the tube surface.1
- Complete by tightening 1/4 turn (size 1/4OD and 6 mm or more).
- The front ferrule has excellent corrosion resistance.
- The blade edge of the back ferrule is hardened to a hardness greater than the surface of the tube.
Spec
- series: BI-Lok fittings (metric series)
- Type: DOF-M
- Shape: Front ferrule
- Applicable Tube Outer Diameter A (mm): 8
-
Order No.
68-5782-35
Model No.
DOF8M-SS
Standard price
JPY: 300
USD: 1.88
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
68-5782-27
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 10 mm DOF10M-SS
DOF10M-SS
1piece
JPY: 300
USD: 1.88
68-5782-28
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 12 mm DOF12M-SS
DOF12M-SS
1piece
JPY: 410
USD: 2.57
68-5782-30
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 16 mm DOF16M-SS
DOF16M-SS
1piece
JPY: 470
USD: 2.95
68-5782-31
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 4 mm DOF4M-SS
DOF4M-SS
1piece
JPY: 300
USD: 1.88
68-5782-33
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 6 mm DOF6M-SS
DOF6M-SS
1piece
JPY: 250
USD: 1.57
68-5782-35
BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
DOF8M-SS
1piece
JPY: 300
USD: 1.88
68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
特徴
- The BI-Lok joint is a mechanical joint with two ferrules.
- Features of Double Ferrule Type Joints
- By simply tightening the nut, the back ferrule holds the pipe and the front ferrule seals the fluid.
- Since all wetted parts are made of the same material, it can reliably seal a wide temperature range and various fluids from low to high temperatures.
- Features of BI-LOK joints
- The BI-LOK fitting consists of four points: body, nut, front ferrule, and back ferrule.
- The front ferrule is pressed against the main body and tube to seal the fluid in the tube, and the back ferrule is pressed against the tube to lightly bite into the tube to prevent the tube from slipping out. This is the biggest feature that is different from the single sleeve.
- When the nut is tightened with a spanner from the finger tightening position, the front ferrule is deformed along the tapered surface of the main body, and after the sealing mechanism is completed by surface contact, the back ferrule is deformed along the tapered surface of the rear end of the front ferrule, and is strongly pressed against the tube surface.1
- Complete by tightening 1/4 turn (size 1/4OD and 6 mm or more).
- The front ferrule has excellent corrosion resistance.
- The blade edge of the back ferrule is hardened to a hardness greater than the surface of the tube.
仕様
- series: BI-Lok fittings (metric series)
- Type: DOF-M
- Shape: Front ferrule
- Applicable Tube Outer Diameter A (mm): 8
| Order No. | 68-5782-35 | |
|---|---|---|
| 型番 | DOF8M-SS | |
| 標準価格 |
JPY: 300
USD: 1.88
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
68-5782-27 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 10 mm DOF10M-SS | DOF10M-SS | 1piece | JPY: 300 | USD: 1.88 |
|
|
|
68-5782-28 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 12 mm DOF12M-SS | DOF12M-SS | 1piece | JPY: 410 | USD: 2.57 |
|
|
|
68-5782-30 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 16 mm DOF16M-SS | DOF16M-SS | 1piece | JPY: 470 | USD: 2.95 |
|
|
|
68-5782-31 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 4 mm DOF4M-SS | DOF4M-SS | 1piece | JPY: 300 | USD: 1.88 |
|
|
|
68-5782-33 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 6 mm DOF6M-SS | DOF6M-SS | 1piece | JPY: 250 | USD: 1.57 |
|
|
|
68-5782-35 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS | DOF8M-SS | 1piece | JPY: 300 | USD: 1.88 |
|
This page is the page of BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.This page is the page of BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.2-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS 【AXEL GLOBAL】ASONE
68-5782-35 BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS
Features
- The BI-Lok joint is a mechanical joint with two ferrules.
- Features of Double Ferrule Type Joints
- By simply tightening the nut, the back ferrule holds the pipe and the front ferrule seals the fluid.
- Since all wetted parts are made of the same material, it can reliably seal a wide temperature range and various fluids from low to high temperatures.
- Features of BI-LOK joints
- The BI-LOK fitting consists of four points: body, nut, front ferrule, and back ferrule.
- The front ferrule is pressed against the main body and tube to seal the fluid in the tube, and the back ferrule is pressed against the tube to lightly bite into the tube to prevent the tube from slipping out. This is the biggest feature that is different from the single sleeve.
- When the nut is tightened with a spanner from the finger tightening position, the front ferrule is deformed along the tapered surface of the main body, and after the sealing mechanism is completed by surface contact, the back ferrule is deformed along the tapered surface of the rear end of the front ferrule, and is strongly pressed against the tube surface.1
- Complete by tightening 1/4 turn (size 1/4OD and 6 mm or more).
- The front ferrule has excellent corrosion resistance.
- The blade edge of the back ferrule is hardened to a hardness greater than the surface of the tube.
Spec
- series: BI-Lok fittings (metric series)
- Type: DOF-M
- Shape: Front ferrule
- Applicable Tube Outer Diameter A (mm): 8
| Order No. | 68-5782-35 | |
|---|---|---|
| Model No. | DOF8M-SS | |
| Standard price |
JPY: 300
USD: 1.88
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
68-5782-27 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 10 mm DOF10M-SS | DOF10M-SS | 1piece | JPY: 300 | USD: 1.88 |
|
|
|
68-5782-28 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 12 mm DOF12M-SS | DOF12M-SS | 1piece | JPY: 410 | USD: 2.57 |
|
|
|
68-5782-30 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 16 mm DOF16M-SS | DOF16M-SS | 1piece | JPY: 470 | USD: 2.95 |
|
|
|
68-5782-31 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 4 mm DOF4M-SS | DOF4M-SS | 1piece | JPY: 300 | USD: 1.88 |
|
|
|
68-5782-33 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 6 mm DOF6M-SS | DOF6M-SS | 1piece | JPY: 250 | USD: 1.57 |
|
|
|
68-5782-35 | BI-Lok Joint (Metric Series) Front Ferrule DOF-M 8 mm DOF8M-SS | DOF8M-SS | 1piece | JPY: 300 | USD: 1.88 |
|