68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
Features
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
SpecSpec class="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
SpecSpec class="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
仕様
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
*This product might require extra fees.
Order No.
68-5720-03
Model No.
EHHRE4008-1.2-S6-TH3
Standard price
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
仕様
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
※この商品は別途費用が発生する場合があります。
アズワン品番
68-5720-03
型番
EHHRE4008-1.2-S6-TH3
標準価格
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockQuotes="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】ASONE
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
Features
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
Spec
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
*This product might require extra fees.
Order No.
68-5720-03
Model No.
EHHRE4008-1.2-S6-TH3
Standard price
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
68-5719-87
Epoch High Hard Radius External Shape 1.5 mm 0.1644 mm EHHRE4015-S4-TH3
EHHRE4015-S4-TH3
1piece
JPY: 14,790
USD: 92.77
68-5719-88
Epoch High Hard Radius External Shape 1.5 mm 0.1644 mm EHHRE4015-S6-TH3
EHHRE4015-S6-TH3
1piece
JPY: 15,500
USD: 97.23
68-5719-89
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-0.75-S4-TH3
EHHRE4005-0.75-S4-TH3
1piece
JPY: 13,500
USD: 84.68
68-5719-90
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-0.75-S6-TH3
EHHRE4005-0.75-S6-TH3
1piece
JPY: 15,000
USD: 94.09
68-5719-91
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-1.5-S4-TH3
EHHRE4005-1.5-S4-TH3
1piece
JPY: 14,900
USD: 93.46
68-5719-92
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-1.5-S6-TH3
EHHRE4005-1.5-S6-TH3
1piece
JPY: 16,300
USD: 102.25
68-5719-93
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-2.5-S4-TH3
EHHRE4005-2.5-S4-TH3
1piece
JPY: 15,460
USD: 96.98
68-5719-94
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-2.5-S6-TH3
EHHRE4005-2.5-S6-TH3
1piece
JPY: 16,400
USD: 102.87
68-5719-95
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-0.9-S4-TH3
EHHRE4006-0.9-S4-TH3
1piece
JPY: 14,410
USD: 90.39
68-5719-96
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-0.9-S6-TH3
EHHRE4006-0.9-S6-TH3
1piece
JPY: 15,990
USD: 100.30
68-5719-97
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-1.8-S4-TH3
EHHRE4006-1.8-S4-TH3
1piece
JPY: 15,400
USD: 96.60
68-5719-98
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-1.8-S6-TH3
EHHRE4006-1.8-S6-TH3
1piece
JPY: 17,390
USD: 109.08
68-5719-99
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-3-S4-TH3
EHHRE4006-3-S4-TH3
1piece
JPY: 15,500
USD: 97.23
68-5720-01
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-3-S6-TH3
EHHRE4006-3-S6-TH3
1piece
JPY: 17,490
USD: 109.71
68-5720-02
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S4-TH3
EHHRE4008-1.2-S4-TH3
1piece
JPY: 14,410
USD: 90.39
68-5720-03
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
EHHRE4008-1.2-S6-TH3
1piece
JPY: 15,990
USD: 100.30
68-5720-04
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-2.4-S4-TH3
EHHRE4008-2.4-S4-TH3
1piece
JPY: 15,810
USD: 99.17
68-5720-05
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-2.4-S6-TH3
EHHRE4008-2.4-S6-TH3
1piece
JPY: 17,290
USD: 108.46
68-5720-06
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-4-S4-TH3
EHHRE4008-4-S4-TH3
1piece
JPY: 15,400
USD: 96.60
68-5720-07
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-4-S6-TH3
EHHRE4008-4-S6-TH3
1piece
JPY: 17,390
USD: 109.08
68-5720-08
Epoch High Hard Radius External Shape 1.5 mm 0.164 mm EHHRE4015-7.5-S4-TH3
EHHRE4015-7.5-S4-TH3
1piece
JPY: 14,500
USD: 90.96
68-5720-09
Epoch High Hard Radius External Shape 1.5 mm 0.164 mm EHHRE4015-7.5-S6-TH3
EHHRE4015-7.5-S6-TH3
1piece
JPY: 15,900
USD: 99.74
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
SpecSpec class="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
仕様
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
*This product might require extra fees.
Order No.
68-5720-03
Model No.
EHHRE4008-1.2-S6-TH3
Standard price
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
QuantityQuantityass="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
仕様
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
※この商品は別途費用が発生する場合があります。
アズワン品番
68-5720-03
型番
EHHRE4008-1.2-S6-TH3
標準価格
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
在庫数
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[Supplier StockQuotes="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3 【AXEL GLOBAL】ASONE
Contact us
MOLDINO
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
Features
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
Spec
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
-
*This product might require extra fees.
Order No.
68-5720-03
Model No.
EHHRE4008-1.2-S6-TH3
Standard price
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
68-5719-87
Epoch High Hard Radius External Shape 1.5 mm 0.1644 mm EHHRE4015-S4-TH3
EHHRE4015-S4-TH3
1piece
JPY: 14,790
USD: 92.77
68-5719-88
Epoch High Hard Radius External Shape 1.5 mm 0.1644 mm EHHRE4015-S6-TH3
EHHRE4015-S6-TH3
1piece
JPY: 15,500
USD: 97.23
68-5719-89
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-0.75-S4-TH3
EHHRE4005-0.75-S4-TH3
1piece
JPY: 13,500
USD: 84.68
68-5719-90
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-0.75-S6-TH3
EHHRE4005-0.75-S6-TH3
1piece
JPY: 15,000
USD: 94.09
68-5719-91
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-1.5-S4-TH3
EHHRE4005-1.5-S4-TH3
1piece
JPY: 14,900
USD: 93.46
68-5719-92
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-1.5-S6-TH3
EHHRE4005-1.5-S6-TH3
1piece
JPY: 16,300
USD: 102.25
68-5719-93
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-2.5-S4-TH3
EHHRE4005-2.5-S4-TH3
1piece
JPY: 15,460
USD: 96.98
68-5719-94
Epoch High Hard Radius External Shape 0.5 mm 0.067 mm EHHRE4005-2.5-S6-TH3
EHHRE4005-2.5-S6-TH3
1piece
JPY: 16,400
USD: 102.87
68-5719-95
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-0.9-S4-TH3
EHHRE4006-0.9-S4-TH3
1piece
JPY: 14,410
USD: 90.39
68-5719-96
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-0.9-S6-TH3
EHHRE4006-0.9-S6-TH3
1piece
JPY: 15,990
USD: 100.30
68-5719-97
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-1.8-S4-TH3
EHHRE4006-1.8-S4-TH3
1piece
JPY: 15,400
USD: 96.60
68-5719-98
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-1.8-S6-TH3
EHHRE4006-1.8-S6-TH3
1piece
JPY: 17,390
USD: 109.08
68-5719-99
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-3-S4-TH3
EHHRE4006-3-S4-TH3
1piece
JPY: 15,500
USD: 97.23
68-5720-01
Epoch High Hard Radius External Shape 0.6 mm 0.072 mm EHHRE4006-3-S6-TH3
EHHRE4006-3-S6-TH3
1piece
JPY: 17,490
USD: 109.71
68-5720-02
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S4-TH3
EHHRE4008-1.2-S4-TH3
1piece
JPY: 14,410
USD: 90.39
68-5720-03
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
EHHRE4008-1.2-S6-TH3
1piece
JPY: 15,990
USD: 100.30
68-5720-04
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-2.4-S4-TH3
EHHRE4008-2.4-S4-TH3
1piece
JPY: 15,810
USD: 99.17
68-5720-05
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-2.4-S6-TH3
EHHRE4008-2.4-S6-TH3
1piece
JPY: 17,290
USD: 108.46
68-5720-06
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-4-S4-TH3
EHHRE4008-4-S4-TH3
1piece
JPY: 15,400
USD: 96.60
68-5720-07
Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-4-S6-TH3
EHHRE4008-4-S6-TH3
1piece
JPY: 17,390
USD: 109.08
68-5720-08
Epoch High Hard Radius External Shape 1.5 mm 0.164 mm EHHRE4015-7.5-S4-TH3
EHHRE4015-7.5-S4-TH3
1piece
JPY: 14,500
USD: 90.96
68-5720-09
Epoch High Hard Radius External Shape 1.5 mm 0.164 mm EHHRE4015-7.5-S6-TH3
EHHRE4015-7.5-S6-TH3
1piece
JPY: 15,900
USD: 99.74
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3
特徴
- Achieves high feed machining and greatly improves tool life in high-hardness steel machining.
- Low resistance radius blade shape. Due to the effect of the composite R shape of the bottom blade, the thickness of chips is reduced compared to the conventional radius shape (positive R), reducing cutting resistance! In addition, the bottom blade is strongly twisted to improve chip flow. Achieves excellent chip discharge performance!
- Vibration suppression peripheral blade shape. It is possible to minimize chattering vibration at high speed rotation and at corners. It can suppress sudden chipping caused by chattering vibration and reduction in efficiency at corners.
- New coating TH3 for high hardness steel processing. High hardness coating having excellent abrasion resistance and heat resistance. Has excellent impact resistance and suppresses sudden defects. Long life in the machining region of high hardness steel exceeding 50HRC such as quenched steel.
- The representative image is used.
仕様
- External (mm): 0.8
- Approximate R (mm): 0.085
- Tip Flat Diameter (mm): 0.22
- Base R (mm): 0.88
- Corner R (mm): 0.05
- Length under neck (mm): 1.2
- Flute Length (mm): 0.48
- Neck Diameter (mm): 0.76
- Total length (mm): 50
- Shank Diameter (mm): 6
- Number of Flutes (mm): 4
- Shape: A
*This product might require extra fees.
| Order No. | 68-5720-03 | |
|---|---|---|
| Model No. | EHHRE4008-1.2-S6-TH3 | |
| Standard price |
JPY: 15,990
USD: 100.30
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | QuantityQuantityass="init">
68-5720-03 Epoch High Hard Radius External Shape 0.8 mm 0.085 mm EHHRE4008-1.2-S6-TH3特徴
仕様
※この商品は別途費用が発生する場合があります。
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|