AS ONE AS ONE

Listed products : 3 milion productsListed products : 3 milion products"init"> 67-7994-43 SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
BOSCH

67-7994-43　SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165

Features

  • Major General Accessories
  • SDS Plus Bit x 5L(5-Flute Integrally Molded Carbide Head for Accurate Drilling Close to New Circles)
  • Short Type
  • With 5 blades, perfect circles are formed. Strong against rebar and has a long life.
  • Newly developed 5-flute integrated carbide head (The strength of the hammer drill, which has been increasing in power in recent years, does not budge even against the powerful striking force, allowing you to take full advantage of the latest hammer drill.
  • It is resistant to chip breakage due to deck plate penetration work and reinforcing bar interference, and has achieved an ultra-life of about twice as long as general bits.
  • The cost of operation is lower and economical. )
  • Flute with newly designed double U-groove structure (wide flute cross section and uniform and smooth surface processing to quickly discharge chips.
  • No clogging of chips occurs. )
  • Friction check mark (patented) (While this mark is present, you can confirm that the drilling cone diameter is the default value and the correct drilling diameter.)
  • Accurate drilling close to a full circle (4 intersecting blades allow accurate drilling close to a full circle and do not bite the rebar during drilling.
  • The fifth blade (tip point) is easily and accurately positioned. )
  • Work Material: Concrete, Block, Mortar, Stone

Spec

  • Cone diameter (mmφ): 8.0
  • Effective length (mm): 100
  • Total Length: 160~215 mm
  • shanks: SDPlus
  •  
Order No.Order No.ss="init"> 67-7994-43 SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
BOSCH

67-7994-43　SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165

特徴

  • Major General Accessories
  • SDS Plus Bit x 5L(5-Flute Integrally Molded Carbide Head for Accurate Drilling Close to New Circles)
  • Short Type
  • With 5 blades, perfect circles are formed. Strong against rebar and has a long life.
  • Newly developed 5-flute integrated carbide head (The strength of the hammer drill, which has been increasing in power in recent years, does not budge even against the powerful striking force, allowing you to take full advantage of the latest hammer drill.
  • It is resistant to chip breakage due to deck plate penetration work and reinforcing bar interference, and has achieved an ultra-life of about twice as long as general bits.
  • The cost of operation is lower and economical. )
  • Flute with newly designed double U-groove structure (wide flute cross section and uniform and smooth surface processing to quickly discharge chips.
  • No clogging of chips occurs. )
  • Friction check mark (patented) (While this mark is present, you can confirm that the drilling cone diameter is the default value and the correct drilling diameter.)
  • Accurate drilling close to a full circle (4 intersecting blades allow accurate drilling close to a full circle and do not bite the rebar during drilling.
  • The fifth blade (tip point) is easily and accurately positioned. )
  • Work Material: Concrete, Block, Mortar, Stone

仕様

  • Cone diameter (mmφ): 8.0
  • Effective length (mm): 100
  • Total Length: 160~215 mm
  • shanks: SDPlus
  •  
アズワン品番 67-7994-43
型番 X5L080165
JANコード 3165140625449
Standard price JPY: 2,500 USD: 15.68
Excange rate 1USD= 159.42JPY
Valid price in Japan
入り数 1piece
在庫数
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name 型番 Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
67-7994-38 SDS Plus x 5 L Pole Diameter (mmφ): 7.0　X5L070165 X5L070165 1piece JPY: 2,400 USD: 15.06

67-7994-43 SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165 X5L080165 1piece JPY: 2,500 USD: 15.68

67-7994-44 SDS Plus x 5 L Pole Diameter (mmφ): 8.5　X5L085165 X5L085165 1piece JPY: 2,500 USD: 15.68

67-7994-47 SDS Plus x 5 L Pole Diameter (mmφ): 10.0　X5L100165 X5L100165 1piece JPY: 2,600 USD: 16.31

67-7994-48 SDS Plus x 5 L Pole Diameter (mmφ): 10.0　X5L100315 X5L100315 1piece JPY: 5,100 USD: 31.99

This page is the page of SDS Plus x 5 L Pole Diameter (mmφ): 8.0 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init"> 67-7994-43 SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
BOSCH

67-7994-43　SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165

Features

  • Major General Accessories
  • SDS Plus Bit x 5L(5-Flute Integrally Molded Carbide Head for Accurate Drilling Close to New Circles)
  • Short Type
  • With 5 blades, perfect circles are formed. Strong against rebar and has a long life.
  • Newly developed 5-flute integrated carbide head (The strength of the hammer drill, which has been increasing in power in recent years, does not budge even against the powerful striking force, allowing you to take full advantage of the latest hammer drill.
  • It is resistant to chip breakage due to deck plate penetration work and reinforcing bar interference, and has achieved an ultra-life of about twice as long as general bits.
  • The cost of operation is lower and economical. )
  • Flute with newly designed double U-groove structure (wide flute cross section and uniform and smooth surface processing to quickly discharge chips.
  • No clogging of chips occurs. )
  • Friction check mark (patented) (While this mark is present, you can confirm that the drilling cone diameter is the default value and the correct drilling diameter.)
  • Accurate drilling close to a full circle (4 intersecting blades allow accurate drilling close to a full circle and do not bite the rebar during drilling.
  • The fifth blade (tip point) is easily and accurately positioned. )
  • Work Material: Concrete, Block, Mortar, Stone

Spec

  • Cone diameter (mmφ): 8.0
  • Effective length (mm): 100
  • Total Length: 160~215 mm
  • shanks: SDPlus
  •  
Order No. 67-7994-43
Model No. X5L080165
JAN Code 3165140625449
Standard price JPY: 2,500 USD: 15.68
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
67-7994-38 SDS Plus x 5 L Pole Diameter (mmφ): 7.0　X5L070165 X5L070165 1piece JPY: 2,400 USD: 15.06

67-7994-43 SDS Plus x 5 L Pole Diameter (mmφ): 8.0　X5L080165 X5L080165 1piece JPY: 2,500 USD: 15.68

67-7994-44 SDS Plus x 5 L Pole Diameter (mmφ): 8.5　X5L085165 X5L085165 1piece JPY: 2,500 USD: 15.68

67-7994-47 SDS Plus x 5 L Pole Diameter (mmφ): 10.0　X5L100165 X5L100165 1piece JPY: 2,600 USD: 16.31

67-7994-48 SDS Plus x 5 L Pole Diameter (mmφ): 10.0　X5L100315 X5L100315 1piece JPY: 5,100 USD: 31.99

This page is the page of SDS Plus x 5 L Pole Diameter (mmφ): 8.0 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.