TOHNICHI Mfg. Co., Ltd.

67-5266-12　Digital Torque Wrench Measurement Range 0.01 N/m　CES10NX8D

Features

Suitable for tightening management of low torque areas such as resin and light metal products.
Can be used in places where it is difficult to tighten with a screwdriver due to height limitation.
Prevention of leakage of defective screw tightening by monitoring torque and angle
Send and receive data wirelessly to manage tightening order, conditions, and lines (optional)
[Application]
For tightening and inspecting low-torque areas such as cable ground, resin screws and ceramic screws.
For narrow areas where it is difficult to tighten with torque drivers or conventional torque wrenches due to height restrictions.
For tightening delicate parts such as sensors and semiconductor manufacturing equipment.
[Notes]
Charger (BC-3 G) is sold separately.
Image 1 shows the ratchet head QH6D (accessories) connected to the CES5NX6D.

Torque Measuring Range (N.m) Minimum to Maximum: 1~1.99 (Torque Accuracy ±2%) 2~10 (Torque Accuracy ±1%) Torque Measuring Range (N.m)1 Memory: 0.01
Total length (mm): 197.5
Effective length (mm): 172
Angular accuracy: ±2°+1digit (when rotated 90° at 30~180°/s)
Display: LCD/measured value (Torque, Angle, Units), counter 4 digits, battery level display 4 levels, antenna mark (optional) LED/pass/fail judgment
Data memory: 1000 data (Torque, angle, pass/fail decision result)
Data output: USB Type-C connector, Bluetooth (optional) Communication mode: Classic (SPP), BLE
Basic functions: Peak hold, measurement data memory, auto memory reset, inspection mode/tightening mode changeover, tightening completion alarm, pass/fail judgment, detection of double tightening, Auto Zero, Auto Power Off, Overtorque alarm
Power Supply: Nickel-Metal Hydride Battery
Continuous use time: Approximately 20 hours (with optional Bluetooth connection: Approximately 8 hours)
Charging time: Approx. 3.5 hours
Operating Temperature Range: 0~40°C (No Condensation)

Order No.	67-5266-12
Model No.	CES10NX8D
JAN Code	4580135825618
Standard price	JPY: 123,800 USD: 776.57 Excange rate 1USD= 159.42JPY Valid price in Japan
Quantity	1piece
Stock in Japan
Supplier Stock

Product image	Order No.	Name	Model No.		Quantity	Standard price	Valid price in Japan	Stock [Supplier Stock]
	67-5266-11	Digital Torque Wrench Measurement Range 0.005 N/m　CES5NX6D	CES5NX6D		1piece	JPY: 133,700	USD: 838.67
	67-5266-12	Digital Torque Wrench Measurement Range 0.01 N/m　CES10NX8D	CES10NX8D		1piece	JPY: 123,800	USD: 776.57