AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
すべてのカテゴリ
Contact usSearchlass="init"> 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
すべてのカテゴリ
Contact us
Quote Other Requests
  • AXEL GLOBAL
  • Categories
  • Lab Instruments & Supplies
  • Measuring Instruments
  • Atmosphere, Gas
  • Gas Monitor
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) and others
  • 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
CHINO CORPORATION

67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11

  • Print
  • PDF
Check the Series Lineup
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
  • Figures
    FiguresFiguresass="init"> 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

    AS ONE AS ONE

    取扱点数300万点
    How to use
    Cách sử dụng
    Contact us
    すべてのカテゴリ
    Contact us
    Quote Other Requests
    • AXEL GLOBAL
    • カテゴリ一覧
    • Lab Instruments & Supplies
    • Measuring Instruments
    • Atmosphere, Gas
    • Gas Monitor
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) 等
    • 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    CHINO CORPORATION

    67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11

    • 印刷
    • PDF
    他のバリエーション
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
    • Figures
      FiguresFiguresass="init"> 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

      AS ONE AS ONE

      取扱点数300万点
      How to use
      Cách sử dụng
      Contact us
      すべてのカテゴリ
      Contact us
      Quote Other Requests
      • AXEL GLOBAL
      • カテゴリ一覧
      • Lab Instruments & Supplies
      • Measuring Instruments
      • Atmosphere, Gas
      • Gas Monitor
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) 等
      • 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      CHINO CORPORATION

      67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11

      • 印刷
      • PDF
      他のバリエーション
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • <!--@[pd-1]@-->図面・資料<!--@/[pd-1]@-->
        図面・資料

      Features

      • Small screw-in type oxygen detector and indicator are suitable for measuring oxygen in pipe piping and equipment.
      • The MG1000 series is a wall-mounted oximeter that uses a limit-current zirconia oximeter. It is a digital oximeter that can measure oxygen concentration from a low concentration as an oxygen-deficiency meter or oximeter, with various alarm functions as well as display of measured values.
      • High performance and small size.
      • Uses long-life zirconia oxygen sensing element to maintain high precision and excellent reproducibility.
      • Equipped with analog output and alarm relay output as standard.
      • Two models are available: a built-in detector and a separate detector.
      • zirconia oximeter
      • Stabilized zirconia is known as an oxygen ion conductor.
      • The stabilized zirconia is used as a substrate, and a platinum electrode and an oxygen diffusion limiting hole are formed on one surface of the substrate, and a platinum heater is formed on the other surface.
      • In order to obtain practical oxygen ion conductivity, the substrate is heated to several hundred °C by energizing the heater. When a voltage is applied between the electrodes, a current with oxygen ions as carriers flows through the substrate.
      • Due to the oxygen diffusion limiting hole formed on the cathode, the amount of oxygen flowing into the cathode is limited, and a flat region (limit current) is observed in the current-voltage characteristics.
      • Since the limiting current varies in proportion to the oxygen concentration, it is possible to determine the oxygen concentration in the atmosphere by measuring the limiting current.

      仕様

      • Detector mounting position: Separation
      • Separation Detector Cable Length: 2 m
      • Transmission signal: 0~250 mV
      • alarm setting
      • Densitometer Mode Type II (fixed by user)
      • Lower limit value, Upper limit value, buzzer enabled/disabled, lamp enabled/disabled, relay output enabled/disabled, output holding enabled/disabled
      • Unspecified parameters are the default values for densitometer mode Type I.
      • Display range: 0.00~2.50%O2 fixed
      • Transmission output range: output corresponding to 0.00~2.50%O2
      • *The display range and transmission output range can be combined in the following formats: 00, 11, 20, 22. However, only 00 can be specified when the alarm setting is in the oxygen deficiency meter mode.
      • In the case of display range 1 in the moat meter mode Type I, the initial alarm value is lower limit 0.00%, upper limit 2.50%.
      • Measurement Principle: Zirconia Solid Electrolyte Method
      • Air sampling method: natural diffusion type
      • Response time: 90% response within 20 seconds
      • Position of the oxygen sensing element: Connected to the main body and fixed in a separate threaded dedicated holder
      • Measurement value display: Digital display with 3-digit yellow-green LED
      • Measuring range (resolution): 0.0~25.0 (0.1)%O2
      • Accuracy rating: +/- 0.05%O2 +/- 1digit in a dry gas of oxygen and nitrogen
      • Transmission method: output to 0.00~2.50 measurement indications
      • Alarm function: Measured value alarm ...
      • Alarm setting code: Densitometer mode *1
      • *1 Alarm setting "A" is set to the initial value at the time of shipment, and alarm setting "B" is set to the state of alarm setting "0" for unspecified alarm value and alarm output operation.
      • Lower warning value: specified within 0~26% *2
      • Upper warning value: specified within 0~26% *2
      • *2 The lower alarm value cannot be set to a value larger than the upper alarm value or cannot be specified. When alarm release alarm is held, it is released by front reset key.
      • Relay output yes/no: Optional
      • Buzzer with/without: Optional
      • Lamp ON/OFF: Optional
      • Output Hold Yes/No: Optional
      • Detection element abnormality alarm: When the heater current to the oxygen detection element is abnormal, relay output is ON, buzzer is blown, and lamp is lit regardless of the content of the measured value alarm.
      • Power failure warning: When the power supply to the tester is OFF or when the fuse is broken, relay output is ON.
      • Alarm relay output: number of output circuits (2), number of output circuits (1) in case of detectors separated type, output capacity (Resistive Load 110 V AC 0.2 A, 24 V DC 1 A/Inductive Load 110 V AC 0.1 A, 24 V DC 0.5 A)
      • Warm-up time: 5 minutes
      • Note)Warning and transmission signals are not output during warm-up.
      • Operating Temperature Range: 0~60°C
      • Operating humidity range: 80%rh or less
      • Power: 100 VAC ±10% 50/60Hz
      • Power Consumption: Approx. 8VA
      • Mass: Body/Approx. 500 g, Separation Sensor/Approx. 500 g
      • Mounting method: wall or switchbox mounting
      • ISO 14001 Certified JQA-EM2414
      • ISO 9001 Certification JQA-0656
      • External Dimensions (Excluding Sensor Cable)
      •  

      荷姿サイズ:120×55×120 mm 1 kg  [荷姿サイズについて]

      アズワン品番 67-4914-53
      Model No. MG1220-B11
      JAN Code 4562208230697
      標準価格 JPY: 239,000 USD: 1,499.19
      Excange rate 1USD= 159.42JPY
      Valid price in Japan
      入り数 1piece
      在庫数
      サプライヤ在庫

      Product Variations (Different Sizes, Specifications, Optional Products, etc.)

      Product imageProduct imagess="init"> 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

      AS ONE AS ONE

      取扱点数300万点
      How to use
      Cách sử dụng
      Contact us
      すべてのカテゴリ
      Contact us
      Quote Other Requests
      • AXEL GLOBAL
      • カテゴリ一覧
      • Lab Instruments & Supplies
      • Measuring Instruments
      • Atmosphere, Gas
      • Gas Monitor
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) 等
      • 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      CHINO CORPORATION

      67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11

      • 印刷
      • PDF
      他のバリエーション
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • <!--@[pd-1]@-->図面・資料<!--@/[pd-1]@-->
        図面・資料

      特徴

      • Small screw-in type oxygen detector and indicator are suitable for measuring oxygen in pipe piping and equipment.
      • The MG1000 series is a wall-mounted oximeter that uses a limit-current zirconia oximeter. It is a digital oximeter that can measure oxygen concentration from a low concentration as an oxygen-deficiency meter or oximeter, with various alarm functions as well as display of measured values.
      • High performance and small size.
      • Uses long-life zirconia oxygen sensing element to maintain high precision and excellent reproducibility.
      • Equipped with analog output and alarm relay output as standard.
      • Two models are available: a built-in detector and a separate detector.
      • zirconia oximeter
      • Stabilized zirconia is known as an oxygen ion conductor.
      • The stabilized zirconia is used as a substrate, and a platinum electrode and an oxygen diffusion limiting hole are formed on one surface of the substrate, and a platinum heater is formed on the other surface.
      • In order to obtain practical oxygen ion conductivity, the substrate is heated to several hundred °C by energizing the heater. When a voltage is applied between the electrodes, a current with oxygen ions as carriers flows through the substrate.
      • Due to the oxygen diffusion limiting hole formed on the cathode, the amount of oxygen flowing into the cathode is limited, and a flat region (limit current) is observed in the current-voltage characteristics.
      • Since the limiting current varies in proportion to the oxygen concentration, it is possible to determine the oxygen concentration in the atmosphere by measuring the limiting current.

      仕様

      • Detector mounting position: Separation
      • Separation Detector Cable Length: 2 m
      • Transmission signal: 0~250 mV
      • alarm setting
      • Densitometer Mode Type II (fixed by user)
      • Lower limit value, Upper limit value, buzzer enabled/disabled, lamp enabled/disabled, relay output enabled/disabled, output holding enabled/disabled
      • Unspecified parameters are the default values for densitometer mode Type I.
      • Display range: 0.00~2.50%O2 fixed
      • Transmission output range: output corresponding to 0.00~2.50%O2
      • *The display range and transmission output range can be combined in the following formats: 00, 11, 20, 22. However, only 00 can be specified when the alarm setting is in the oxygen deficiency meter mode.
      • In the case of display range 1 in the moat meter mode Type I, the initial alarm value is lower limit 0.00%, upper limit 2.50%.
      • Measurement Principle: Zirconia Solid Electrolyte Method
      • Air sampling method: natural diffusion type
      • Response time: 90% response within 20 seconds
      • Position of the oxygen sensing element: Connected to the main body and fixed in a separate threaded dedicated holder
      • Measurement value display: Digital display with 3-digit yellow-green LED
      • Measuring range (resolution): 0.0~25.0 (0.1)%O2
      • Accuracy rating: +/- 0.05%O2 +/- 1digit in a dry gas of oxygen and nitrogen
      • Transmission method: output to 0.00~2.50 measurement indications
      • Alarm function: Measured value alarm ...
      • Alarm setting code: Densitometer mode *1
      • *1 Alarm setting "A" is set to the initial value at the time of shipment, and alarm setting "B" is set to the state of alarm setting "0" for unspecified alarm value and alarm output operation.
      • Lower warning value: specified within 0~26% *2
      • Upper warning value: specified within 0~26% *2
      • *2 The lower alarm value cannot be set to a value larger than the upper alarm value or cannot be specified. When alarm release alarm is held, it is released by front reset key.
      • Relay output yes/no: Optional
      • Buzzer with/without: Optional
      • Lamp ON/OFF: Optional
      • Output Hold Yes/No: Optional
      • Detection element abnormality alarm: When the heater current to the oxygen detection element is abnormal, relay output is ON, buzzer is blown, and lamp is lit regardless of the content of the measured value alarm.
      • Power failure warning: When the power supply to the tester is OFF or when the fuse is broken, relay output is ON.
      • Alarm relay output: number of output circuits (2), number of output circuits (1) in case of detectors separated type, output capacity (Resistive Load 110 V AC 0.2 A, 24 V DC 1 A/Inductive Load 110 V AC 0.1 A, 24 V DC 0.5 A)
      • Warm-up time: 5 minutes
      • Note)Warning and transmission signals are not output during warm-up.
      • Operating Temperature Range: 0~60°C
      • Operating humidity range: 80%rh or less
      • Power: 100 VAC ±10% 50/60Hz
      • Power Consumption: Approx. 8VA
      • Mass: Body/Approx. 500 g, Separation Sensor/Approx. 500 g
      • Mounting method: wall or switchbox mounting
      • ISO 14001 Certified JQA-EM2414
      • ISO 9001 Certification JQA-0656
      • External Dimensions (Excluding Sensor Cable)
      •  

      荷姿サイズ:120×55×120 mm 1 kg  [荷姿サイズについて]

      アズワン品番 67-4914-53
      型番 MG1220-B11
      JANコード 4562208230697
      標準価格 JPY: 239,000 USD: 1,499.19
      Excange rate 1USD= 159.42JPY
      Valid price in Japan
      入り数 1piece
      在庫数
      サプライヤ在庫

      商品のバリエーション (サイズ違い・スペック違い・オプション品など)

      商品イメージ アズワン品番 商品名 型番 入り数 Standard price 標準価格(ドル) アズワン在庫
      [サプライヤ在庫]
      67-4914-46 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Acidity Meter Mode I, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-000 MG1220-000 1piece JPY: 215,000 USD: 1,348.64

      67-4914-47 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Acidity Meter Mode Ii, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-100 MG1220-100 1piece JPY: 218,000 USD: 1,367.46

      67-4914-48 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-A00 MG1220-A00 1piece JPY: 218,000 USD: 1,367.46

      67-4914-49 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-A11 MG1220-A11 1piece JPY: 234,000 USD: 1,467.82

      67-4914-50 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.0~25.0%O2/0.00~2.50%O2 Automatic Switching, Transmission Output: Supports 0.0~25.0%O2) MG1220-A20 MG1220-A20 1piece JPY: 231,000 USD: 1,449.00

      67-4914-51 Mg1200Series Detector Separated Oxygen Meter (Supports 2 M Lead, 0~250 Mv Transmission Signal, Densitometer Mode I, Automatic Switching Of Display: 0.0~25.0%O2/0.00~2.50%O2, Display Of Transmission Output: 000~250) MG1220-A22 MG1220-A22 1piece JPY: 234,000 USD: 1,467.82

      67-4914-52 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-B00 MG1220-B00 1piece JPY: 223,000 USD: 1,398.82

      67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 MG1220-B11 1piece JPY: 239,000 USD: 1,499.19

      67-4914-54 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.0~25.0%O2/0.00~2.50%O2 Automatic Switching, Transmission Output: Supports 0.0~25.0%O2) MG1220-B20 MG1220-B20 1piece JPY: 236,000 USD: 1,480.37

      67-4914-55 Mg1200Series Detector Separated Oxygen Meter (Supports 2 M Lead, 0~250 Mv Transmission Signal, Densitometer Mode Ii, Automatic Switching Of Display: 0.0~25.0%O2/0.00~2.50%O2, Display Of Transmission Output: 000~250) MG1220-B22 MG1220-B22 1piece JPY: 239,000 USD: 1,499.19

      Related ProductsRelated Productsss="init"> 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

      AS ONE AS ONE

      取扱点数300万点
      How to use
      Cách sử dụng
      Contact us
      すべてのカテゴリ
      Contact us
      Quote Other Requests
      • AXEL GLOBAL
      • カテゴリ一覧
      • Lab Instruments & Supplies
      • Measuring Instruments
      • Atmosphere, Gas
      • Gas Monitor
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) 等
      • 67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      CHINO CORPORATION

      67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11

      • 印刷
      • PDF
      他のバリエーション
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11
      • <!--@[pd-1]@-->図面・資料<!--@/[pd-1]@-->
        図面・資料

      特徴

      • Small screw-in type oxygen detector and indicator are suitable for measuring oxygen in pipe piping and equipment.
      • The MG1000 series is a wall-mounted oximeter that uses a limit-current zirconia oximeter. It is a digital oximeter that can measure oxygen concentration from a low concentration as an oxygen-deficiency meter or oximeter, with various alarm functions as well as display of measured values.
      • High performance and small size.
      • Uses long-life zirconia oxygen sensing element to maintain high precision and excellent reproducibility.
      • Equipped with analog output and alarm relay output as standard.
      • Two models are available: a built-in detector and a separate detector.
      • zirconia oximeter
      • Stabilized zirconia is known as an oxygen ion conductor.
      • The stabilized zirconia is used as a substrate, and a platinum electrode and an oxygen diffusion limiting hole are formed on one surface of the substrate, and a platinum heater is formed on the other surface.
      • In order to obtain practical oxygen ion conductivity, the substrate is heated to several hundred °C by energizing the heater. When a voltage is applied between the electrodes, a current with oxygen ions as carriers flows through the substrate.
      • Due to the oxygen diffusion limiting hole formed on the cathode, the amount of oxygen flowing into the cathode is limited, and a flat region (limit current) is observed in the current-voltage characteristics.
      • Since the limiting current varies in proportion to the oxygen concentration, it is possible to determine the oxygen concentration in the atmosphere by measuring the limiting current.

      仕様

      • Detector mounting position: Separation
      • Separation Detector Cable Length: 2 m
      • Transmission signal: 0~250 mV
      • alarm setting
      • Densitometer Mode Type II (fixed by user)
      • Lower limit value, Upper limit value, buzzer enabled/disabled, lamp enabled/disabled, relay output enabled/disabled, output holding enabled/disabled
      • Unspecified parameters are the default values for densitometer mode Type I.
      • Display range: 0.00~2.50%O2 fixed
      • Transmission output range: output corresponding to 0.00~2.50%O2
      • *The display range and transmission output range can be combined in the following formats: 00, 11, 20, 22. However, only 00 can be specified when the alarm setting is in the oxygen deficiency meter mode.
      • In the case of display range 1 in the moat meter mode Type I, the initial alarm value is lower limit 0.00%, upper limit 2.50%.
      • Measurement Principle: Zirconia Solid Electrolyte Method
      • Air sampling method: natural diffusion type
      • Response time: 90% response within 20 seconds
      • Position of the oxygen sensing element: Connected to the main body and fixed in a separate threaded dedicated holder
      • Measurement value display: Digital display with 3-digit yellow-green LED
      • Measuring range (resolution): 0.0~25.0 (0.1)%O2
      • Accuracy rating: +/- 0.05%O2 +/- 1digit in a dry gas of oxygen and nitrogen
      • Transmission method: output to 0.00~2.50 measurement indications
      • Alarm function: Measured value alarm ...
      • Alarm setting code: Densitometer mode *1
      • *1 Alarm setting "A" is set to the initial value at the time of shipment, and alarm setting "B" is set to the state of alarm setting "0" for unspecified alarm value and alarm output operation.
      • Lower warning value: specified within 0~26% *2
      • Upper warning value: specified within 0~26% *2
      • *2 The lower alarm value cannot be set to a value larger than the upper alarm value or cannot be specified. When alarm release alarm is held, it is released by front reset key.
      • Relay output yes/no: Optional
      • Buzzer with/without: Optional
      • Lamp ON/OFF: Optional
      • Output Hold Yes/No: Optional
      • Detection element abnormality alarm: When the heater current to the oxygen detection element is abnormal, relay output is ON, buzzer is blown, and lamp is lit regardless of the content of the measured value alarm.
      • Power failure warning: When the power supply to the tester is OFF or when the fuse is broken, relay output is ON.
      • Alarm relay output: number of output circuits (2), number of output circuits (1) in case of detectors separated type, output capacity (Resistive Load 110 V AC 0.2 A, 24 V DC 1 A/Inductive Load 110 V AC 0.1 A, 24 V DC 0.5 A)
      • Warm-up time: 5 minutes
      • Note)Warning and transmission signals are not output during warm-up.
      • Operating Temperature Range: 0~60°C
      • Operating humidity range: 80%rh or less
      • Power: 100 VAC ±10% 50/60Hz
      • Power Consumption: Approx. 8VA
      • Mass: Body/Approx. 500 g, Separation Sensor/Approx. 500 g
      • Mounting method: wall or switchbox mounting
      • ISO 14001 Certified JQA-EM2414
      • ISO 9001 Certification JQA-0656
      • External Dimensions (Excluding Sensor Cable)
      •  

      荷姿サイズ:120×55×120 mm 1 kg  [荷姿サイズについて]

      アズワン品番 67-4914-53
      型番 MG1220-B11
      JANコード 4562208230697
      標準価格 JPY: 239,000 USD: 1,499.19
      Excange rate 1USD= 159.42JPY
      Valid price in Japan
      入り数 1piece
      在庫数
      サプライヤ在庫

      商品のバリエーション (サイズ違い・スペック違い・オプション品など)

      商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
      [サプライヤ在庫]
      67-4914-46 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Acidity Meter Mode I, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-000 MG1220-000 1piece JPY: 215,000 USD: 1,348.64

      67-4914-47 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Acidity Meter Mode Ii, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-100 MG1220-100 1piece JPY: 218,000 USD: 1,367.46

      67-4914-48 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-A00 MG1220-A00 1piece JPY: 218,000 USD: 1,367.46

      67-4914-49 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-A11 MG1220-A11 1piece JPY: 234,000 USD: 1,467.82

      67-4914-50 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode I, Display: 0.0~25.0%O2/0.00~2.50%O2 Automatic Switching, Transmission Output: Supports 0.0~25.0%O2) MG1220-A20 MG1220-A20 1piece JPY: 231,000 USD: 1,449.00

      67-4914-51 Mg1200Series Detector Separated Oxygen Meter (Supports 2 M Lead, 0~250 Mv Transmission Signal, Densitometer Mode I, Automatic Switching Of Display: 0.0~25.0%O2/0.00~2.50%O2, Display Of Transmission Output: 000~250) MG1220-A22 MG1220-A22 1piece JPY: 234,000 USD: 1,467.82

      67-4914-52 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.0~25.0%O2 Fixed, Transmission Output: Supports 0.0~25.0%O2) MG1220-B00 MG1220-B00 1piece JPY: 223,000 USD: 1,398.82

      67-4914-53 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2) MG1220-B11 MG1220-B11 1piece JPY: 239,000 USD: 1,499.19

      67-4914-54 Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.0~25.0%O2/0.00~2.50%O2 Automatic Switching, Transmission Output: Supports 0.0~25.0%O2) MG1220-B20 MG1220-B20 1piece JPY: 236,000 USD: 1,480.37

      67-4914-55 Mg1200Series Detector Separated Oxygen Meter (Supports 2 M Lead, 0~250 Mv Transmission Signal, Densitometer Mode Ii, Automatic Switching Of Display: 0.0~25.0%O2/0.00~2.50%O2, Display Of Transmission Output: 000~250) MG1220-B22 MG1220-B22 1piece JPY: 239,000 USD: 1,499.19

      関連商品

      1 / 1 ページ

      Mg9700 Oxygen Meter Inspection Kit Inspection Attachment (For Mg 1200) MG9712

      Mg9700 Oxygen Meter Inspection Kit Inspection Attachment (For Mg 1200) MG9712

      Mg9700 Oxymeter Inspection Kit Flowmeter Set MG9725

      Mg9700 Oxymeter Inspection Kit Flowmeter Set MG9725

      [$1]Mg1200Series Detector Separated Oxygen Meter (Lead 2 M, Transmission Signal: 0~250 Mv, Densitometer Mode Ii, Display: 0.00~2.50%O2 Fixed, Transmission Output: Supports 0.00~2.50%O2)[/$1]

      Explore AXEL

      • Categories
      • Catalogs
      • Brands

      How to use

      • User’s Guide
      • For Re-seller
      • For End-User

      Get to Know Us

      • About us
      • Site Policy
      • Privacy Policy
      • Cookies Policy

      Let Us Help You

      • Contact Us
      • Product Proposal
        (for Supplier)
      • Other Requests

      Countries and Regions

      • English

      • China

      • Indonesia

      • Korea

      • Thailand

      • Vietnam

      AS ONE Group

      • AXEL-SHOP (Japan)

      • AS ONE INTERNATIONAL

      • AS ONE 亚速旺上海商贸 (China)

      Copyright © AS ONE Corporation. All rights reserved.