Electroless nickel plating is applied to the metal part.
The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
The body can be positioned according to the tube extraction direction.
The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
In addition, it is possible to tighten the screw while fixing the resin part.
The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
For General Pneumatic and Hydraulic Piping
for robots and labor-saving equipment
仕様
Applicable Tube Outer Diameter D (mm): 4
Applicable Tube Outer Diameter D1 (mm): 4
Applicable Tube Outer Diameter D2 (mm): 4 x 4
Applicable Tube Outer Diameter D3 (mm): 4
Fluid Temperature (°C): Air: 0~60°C, Water: 0~30°C(Do not freeze.)
Fluids used: Air, Water
Fluids used: Air, Water
Fluid Temperature: Air: 0~60°C, Water: 0~30°C(Do not freeze.)
Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
Material/Finish: Body (Resin)/Polybutylene Terephthalate (PBT)
Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less. When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
