67-2257-48 One Touch Joint M Series Tee 12 mm PT3/8 PTAM-12-PT38-PM
Features
- Electroless nickel plating is applied to the metal part.
- The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
- The body can be positioned according to the tube extraction direction.
- The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
- In addition, it is possible to tighten the screw while fixing the resin part.
- The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
- For General Pneumatic and Hydraulic Piping
- for robots and labor-saving equipment
仕様
- Applicable Tube Outer Diameter D (mm): 12 x 12
- Applicable Tube Outer Diameter D1 (mm): 12
- Applicable Tube Outer Diameter D2 (mm): 12
- Connection Diameter: PT3/8
- Fluid Temperature (°C): Air: 0~60°C, Water: 0~30°C (Do not freeze.
- Hex Opposite Side (mm): 22
- Fluids used: Air, Water
- Applicable Tube Outer Diameter (mm): 12
- )
- Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
- Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
- Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
- Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
- Material/Finish: Body (Resin)/Polybutylene Terephthalate (PBT)
- Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less. When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
- Country of Origin: Japan
- Securities Code: 383-8279
Package sizePackage sizes="init">
67-2257-48 One Touch Joint M Series Tee 12 mm PT3/8 PTAM-12-PT38-PM
特徴
- Electroless nickel plating is applied to the metal part.
- The R (PT) screws are coated with a color sticker for each R (PT) screw that can tell the screw size at a glance.
- The body can be positioned according to the tube extraction direction.
- The joint between the R (PT) screw part and the resin such as the elbow/tee rotates, and can be freely positioned in accordance with the direction in which the tube is taken out after fitting.
- In addition, it is possible to tighten the screw while fixing the resin part.
- The tube grip rotates smoothly within the fitting and prevents the tube from turning out.
- For General Pneumatic and Hydraulic Piping
- for robots and labor-saving equipment
仕様
- Applicable Tube Outer Diameter D (mm): 12 x 12
- Applicable Tube Outer Diameter D1 (mm): 12
- Applicable Tube Outer Diameter D2 (mm): 12
- Connection Diameter: PT3/8
- Fluid Temperature (°C): Air: 0~60°C, Water: 0~30°C (Do not freeze.
- Hex Opposite Side (mm): 22
- Fluids used: Air, Water
- Applicable Tube Outer Diameter (mm): 12
- )
- Maximum Working Pressure: Air: 0.97 MPa, Water: 0.19 MPa
- Working vacuum pressure (when the working fluid is air): 1.4 kPa or more
- Applicable Tube (when the fluid used is air): Nylon Tube (AS1, AS4), Tube for Spot Welding Equipment (SP4, SPF), Polyurethane Tube (UH, UF, UFL, UE, UC)
- Applicable Tube (When Using Water): Nylon Tube (AS1), Tube for Spot Welding Equipment (SP4, SPF)
- Material/Finish: Body (Resin)/Polybutylene Terephthalate (PBT)
- Note:If the maximum operating pressure of the tube is lower than the above pressure, use the tube at the maximum operating pressure or less. When using a tube other than the applicable tube, please use a tube whose outer diameter accuracy is within ±0.1 mm of nylon and within ±0.15 mm of urethane, and whose roundness is within 0.2 mm of maximum outer diameter and minimum outer diameter.
- Country of Origin: Japan
- Securities Code: 383-8279
荷姿サイズ：58×51×22 mm [About Package size]
| アズワン品番 | 67-2257-48 | |
|---|---|---|
| 型番 | PTAM-12-PT38-PM | |
| Standard price |
JPY: 609
USD: 3.82
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| 在庫数 |
|
|
| Supplier Stock |
|
|
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [Supplier StockSupplier Stock"init">
67-2257-48 One Touch Joint M Series Tee 12 mm PT3/8 PTAM-12-PT38-PM特徴
仕様
荷姿サイズ：58×51×22 mm [荷姿サイズについて]
| ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|