Spec

• Battery capacity: 10,000 mAh for PD20W
• Input
• (USB micro B): 5 V/2.5 A, 9 V/2 A, 12 V/1.5 A
• (USB Type-C): 5 V/2.5 A, 9 V/2 A, 12 V/1.5 A
• Output
• (USB Type-A): 5 V/3 A, 9 V/2.0 A, 12 V/1.5 A (18 W total)
• (USB Type-C): 5 V/2.4 A, 9 V/2.2 A, 12 V/1.67 A (20 W total)
• Input jacks: USB micro B (female) x 1/USB Type-C (female) x 1
• Output Terminals: USB Type-A (Female) x 2 USB Type-C (Female) x 1
• *Also used as input terminal
• Charging time to the unit (non-PD mode): Approx. 6 hours
• Charging time to the unit (PD mode): Approximately 3 hours 20 minutes
• Protective Function: Overcharge, Overdischarge, Overcurrent, Short Circuit, Heat Protection
• Dimensions: W69 x D16 x H140mm
• Product weight: approx. 228 g
• Operating temperature range: 0°C to 40°C
• Operating humidity range: 20~80% (non-condensing)
• Material: ABS
• PSE: compliance
• Accessories
• USB Type-C Charging Cable (15 cm), Owner's Manual
• Compatible Devices
• Devices that can be charged using the USB port
• *In order to realize high-speed charging performance, it is necessary to support the charging device and the cable to be used.
• *Depending on the specifications and performance of the applicable device, charging may not be possible with some devices.
• *Depending on the device, a separate charging cable may be required.
• Operating Precautions
• Our company assumes no responsibility for any damage to data or connected devices caused by the use of this product.
• Discontinue use immediately if smoke, heat, unusual odor or noise occurs.
• Do not poop, ride, throw, or drop the product.
• Do not disassemble or modify it.
• Children should be supervised by a guardian at all times.
• Do not use this product on infants, people with sensory or behavioral disabilities, or pets.
• Clean with a soft cloth.
• The colors in the product image may differ from the actual product.
• Company names and product names are trademarks or registered trademarks of their respective companies.
• Product design and specifications are subject to change without notice.
• Precautions for Using Lithium-Ion Batteries
• Do not leave in areas subject to high temperatures, such as on the dashboard of a car, near a window, or in a parked car. Leaking battery fluid can cause overheating, explosion, or fire.
• Do not leave the printer near a heat source such as a heater or stove. Failure to observe this precaution may result in overheating, explosion, or ignition.
• Do not continue charging for a long period of time. Doing so can accelerate the deterioration of the battery and cause it to overheat, explode, or catch fire.
• Do not leave the camera without battery power for a long period of time. Doing so can accelerate the deterioration of the battery and cause it to overheat, explode, or catch fire.
• Do not wet with water, sea water, juice, or other liquids. Doing so may damage the internal protective circuit, resulting in overheating, smoke, or fire.
• Do not throw into fire or use near a heat source. Doing so can damage the protective circuit and cause it to overheat, explode, or catch fire.
• Do not throw or give strong impact such as dropping. Doing so can cause the battery to deform, damage its protective circuitry, and cause it to operate at abnormal currents or voltages, resulting in overheating, explosion, or fire.
• Do not place flammable objects on or cover the battery during charging or use. Failure to observe this precaution may result in overheating, explosion, or ignition.
• Over the years and with frequent use, the battery of this product will deteriorate and run down, and the amount of time that it can be used even after being charged may be extremely short.
• If you notice any unusual odor, heat, discoloration, deformation, or other abnormalities during use, charging, or storage, immediately discontinue use. Continued use can cause the battery to overheat, explode, or catch fire.
• If the battery leaks, deforms, or smells, move the product away from fire. Leaking electrolyte or gas may catch fire, causing it to explode or catch fire.
•