65-9599-09 Air Impact Wrench (Short Type) AI3121
Features
- Impact wrench with short tip for working in narrow places.
- Uses a resin body that does not feel cold.
- The universal design allows both right-handed and left-handed users to switch the rotation direction and adjust the output with one hand. (Rotation direction changeover lever can be moved.).
- For efficient loosening, the reverse (left) rotation direction is set to a higher output than the forward (right) rotation direction.
- Stepless output adjustment is possible by pulling the switch. Uses rotary joint to prevent hose twisting.
- Maximum output torque 370 N · m right rotation, 460 N · m left rotation.
- For tire replacement work of automobiles, large buses and trucks, and maintenance of heavy machinery and construction machinery.
- For attaching and detaching bolts and nuts in general work.
- For replacing claws of tractor tillers.
- Be sure to read the instruction manual before use.
- Please use protective glasses or protective gear.
- Use a compressor with an air tank.
- If the tightening torque is specified, it is recommended to use a torque wrench together.
- Maximum air consumption (ntp) indicates the air consumption converted to the reference condition (0°C, 1 atm =0.1 MPa). The maximum air consumption (op) indicates the air consumption under the actual operating condition (20°C, 0.62 MPa).
- The tightening torque varies depending on the conditions of bolts, nuts, and members to be tightened.
- Applicable bolts are intended for automotive wheel nuts.
Spec
- Output angle dr. (mm): 9.5
- Normal Maximum Torque (N · m): Right Rotation 370/Left Rotation 460
- no-load speed (min-1 [rpm]): 9000
- Operating air pressure (MPa): 0.62
- Maximum air consumption (l/min): (ntp) 613/(op) 90.7
- Air inlet: Rc1/4 (PT1/4)
- Air hose inner diameter (mm): 10 or more
- Applicable Bolt: M12 (Strength Category 10.9) (Reference)
- Mass (kg): 1.0
- Specifications: Dual Rotation/Pneumatic
| Order No. | 65-9599-09 | |
|---|---|---|
| Model No. | AI3121 | |
| JAN Code | 4953488423112 | |
| Standard price |
JPY: 42,000
USD: 263.46
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-9598-70 | Air Impact Wrench Output Angle dr. (mm): 12.7 (With Pin Hole) Normal Maximum Torque (N · m): Right Rotation 732/Left Rotation 922 No Load Rotation Speed (min-1 [rpm]): 8000 AI4220 | AI4220 | 1piece | JPY: 55,000 | USD: 345.00 |
|
|
 |
65-9599-09 | Air Impact Wrench (Short Type) AI3121 | AI3121 | 1piece | JPY: 42,000 | USD: 263.46 |
|
|
 |
65-9599-03 | ［Discontinued］Air Impact Wrench Output Angle dr. (mm): 12.7 (With Pin Hole) Normal Maximum Torque (N · m): Right Rotation 610, Left Rotation 700 No Load Rotation Speed (min-1 [rpm]): 10,000 AI4201GCM | AI4201GCM | 1piece | JPY: 42,000 | USD: 263.46 |
-
|