65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
Features
- For measuring outer dimensions.
- The S Line Series is a high-end model that pursues high functionality and performance.
- Built-in radio type, no transmitter attachment required.
- It is a waterproof protection grade IP65 specification that can be used safely even in the field where water and cutting fluid are applied.
- For accuracy assurance, it comes with an inspection table that shows the values at the time of inspection.
- With reference function, zero point is stored even when the power is turned off.
- With tolerance judgment display function with warning.
- Absolute measurement and relative measurement modes are included.
- With measuring surface carbide tip.
- Comes with a constant pressure device.
- With hold function.
- Auto on/off (Approx. 8 min., Approx. 120 min., No) function is included.
Spec
- Type: Digital
- Measurement range (mm): 75 -100
- Minimum reading (mm): 0.001
- Maximum tolerance (μm): 3
- Power supply: CR 2032 (included for testing)
- IP grade: 65
- frames: iron
- Spindle: Stainless Steel
- Measurement Plane: Carbide Tip
- [Note] The maximum allowable error does not include quantization error (± 1 count).
- An optional wireless receiver (WI -1 M) is required to receive data.
- Our company's ANT + system is certified by Japan, FCC (US), CE (EU) and KCC (South Korea) (selected from major regions in chisel). Please contact us for use in other areas.
- Operating temperature range (°C): 10 -40
- Connection Unit for Data Transmission: WI - M1 (Wireless)
- Radio mode: ANT + (communication distance: 6 m or less)
Package sizePackage sizes="init">
65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
特徴
- For measuring outer dimensions.
- The S Line Series is a high-end model that pursues high functionality and performance.
- Built-in radio type, no transmitter attachment required.
- It is a waterproof protection grade IP65 specification that can be used safely even in the field where water and cutting fluid are applied.
- For accuracy assurance, it comes with an inspection table that shows the values at the time of inspection.
- With reference function, zero point is stored even when the power is turned off.
- With tolerance judgment display function with warning.
- Absolute measurement and relative measurement modes are included.
- With measuring surface carbide tip.
- Comes with a constant pressure device.
- With hold function.
- Auto on/off (Approx. 8 min., Approx. 120 min., No) function is included.
仕様
- Type: Digital
- Measurement range (mm): 75 -100
- Minimum reading (mm): 0.001
- Maximum tolerance (μm): 3
- Power supply: CR 2032 (included for testing)
- IP grade: 65
- frames: iron
- Spindle: Stainless Steel
- Measurement Plane: Carbide Tip
- [Note] The maximum allowable error does not include quantization error (± 1 count).
- An optional wireless receiver (WI -1 M) is required to receive data.
- Our company's ANT + system is certified by Japan, FCC (US), CE (EU) and KCC (South Korea) (selected from major regions in chisel). Please contact us for use in other areas.
- Operating temperature range (°C): 10 -40
- Connection Unit for Data Transmission: WI - M1 (Wireless)
- Radio mode: ANT + (communication distance: 6 m or less)
Package sizePackage sizes="init">
65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
特徴
- For measuring outer dimensions.
- The S Line Series is a high-end model that pursues high functionality and performance.
- Built-in radio type, no transmitter attachment required.
- It is a waterproof protection grade IP65 specification that can be used safely even in the field where water and cutting fluid are applied.
- For accuracy assurance, it comes with an inspection table that shows the values at the time of inspection.
- With reference function, zero point is stored even when the power is turned off.
- With tolerance judgment display function with warning.
- Absolute measurement and relative measurement modes are included.
- With measuring surface carbide tip.
- Comes with a constant pressure device.
- With hold function.
- Auto on/off (Approx. 8 min., Approx. 120 min., No) function is included.
仕様
- Type: Digital
- Measurement range (mm): 75 -100
- Minimum reading (mm): 0.001
- Maximum tolerance (μm): 3
- Power supply: CR 2032 (included for testing)
- IP grade: 65
- frames: iron
- Spindle: Stainless Steel
- Measurement Plane: Carbide Tip
- [Note] The maximum allowable error does not include quantization error (± 1 count).
- An optional wireless receiver (WI -1 M) is required to receive data.
- Our company's ANT + system is certified by Japan, FCC (US), CE (EU) and KCC (South Korea) (selected from major regions in chisel). Please contact us for use in other areas.
- Operating temperature range (°C): 10 -40
- Connection Unit for Data Transmission: WI - M1 (Wireless)
- Radio mode: ANT + (communication distance: 6 m or less)
荷姿サイズ：148×357×41 mm 1.32 kg [荷姿サイズについて]
| アズワン品番 | 65-2724-73 | |
|---|---|---|
| 型番 | MCD-100IP65MW | |
| JANコード | 4975846021174 | |
| 標準価格 |
JPY: 65,000
USD: 407.73
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| 入り数 | 1piece | |
| 在庫数 |
|
|
| サプライヤ在庫 |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | 型番 | 入り数 | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
 |
65-2724-70 | Digital S-Line Micrometer (IP 65) 0 -25 mm MCD-25IP65MW | MCD-25IP65MW | 1piece | JPY: 41,000 | USD: 257.18 |
|
|
 |
65-2724-71 | Digital S-line Micrometer (IP 65) 25 -50 mm MCD-50IP65MW | MCD-50IP65MW | 1piece | JPY: 49,000 | USD: 307.36 |
|
|
 |
65-2724-72 | Digital S-line Micrometer (IP 65) 50 -75 mm MCD-75IP65MW | MCD-75IP65MW | 1piece | JPY: 59,000 | USD: 370.09 |
|
|
 |
65-2724-73 | Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW | MCD-100IP65MW | 1piece | JPY: 65,000 | USD: 407.73 |
|
Related ProductsASONEs="init">
65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
NIIGATA SEIKI CO., LTD.
65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
Features
- For measuring outer dimensions.
- The S Line Series is a high-end model that pursues high functionality and performance.
- Built-in radio type, no transmitter attachment required.
- It is a waterproof protection grade IP65 specification that can be used safely even in the field where water and cutting fluid are applied.
- For accuracy assurance, it comes with an inspection table that shows the values at the time of inspection.
- With reference function, zero point is stored even when the power is turned off.
- With tolerance judgment display function with warning.
- Absolute measurement and relative measurement modes are included.
- With measuring surface carbide tip.
- Comes with a constant pressure device.
- With hold function.
- Auto on/off (Approx. 8 min., Approx. 120 min., No) function is included.
Spec
- Type: Digital
- Measurement range (mm): 75 -100
- Minimum reading (mm): 0.001
- Maximum tolerance (μm): 3
- Power supply: CR 2032 (included for testing)
- IP grade: 65
- frames: iron
- Spindle: Stainless Steel
- Measurement Plane: Carbide Tip
- [Note] The maximum allowable error does not include quantization error (± 1 count).
- An optional wireless receiver (WI -1 M) is required to receive data.
- Our company's ANT + system is certified by Japan, FCC (US), CE (EU) and KCC (South Korea) (selected from major regions in chisel). Please contact us for use in other areas.
- Operating temperature range (°C): 10 -40
- Connection Unit for Data Transmission: WI - M1 (Wireless)
- Radio mode: ANT + (communication distance: 6 m or less)
-
Package size：148×357×41 mm 1.32 kg
[About Package size]
Order No.
65-2724-73
Model No.
MCD-100IP65MW
JAN Code
4975846021174
Standard price
JPY: 65,000
USD: 407.73
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
65-2724-70
Digital S-Line Micrometer (IP 65) 0 -25 mm MCD-25IP65MW
MCD-25IP65MW
1piece
JPY: 41,000
USD: 257.18
65-2724-71
Digital S-line Micrometer (IP 65) 25 -50 mm MCD-50IP65MW
MCD-50IP65MW
1piece
JPY: 49,000
USD: 307.36
65-2724-72
Digital S-line Micrometer (IP 65) 50 -75 mm MCD-75IP65MW
MCD-75IP65MW
1piece
JPY: 59,000
USD: 370.09
65-2724-73
Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
MCD-100IP65MW
1piece
JPY: 65,000
USD: 407.73
Related Products
65-2724-73 Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW
Features
- For measuring outer dimensions.
- The S Line Series is a high-end model that pursues high functionality and performance.
- Built-in radio type, no transmitter attachment required.
- It is a waterproof protection grade IP65 specification that can be used safely even in the field where water and cutting fluid are applied.
- For accuracy assurance, it comes with an inspection table that shows the values at the time of inspection.
- With reference function, zero point is stored even when the power is turned off.
- With tolerance judgment display function with warning.
- Absolute measurement and relative measurement modes are included.
- With measuring surface carbide tip.
- Comes with a constant pressure device.
- With hold function.
- Auto on/off (Approx. 8 min., Approx. 120 min., No) function is included.
Spec
- Type: Digital
- Measurement range (mm): 75 -100
- Minimum reading (mm): 0.001
- Maximum tolerance (μm): 3
- Power supply: CR 2032 (included for testing)
- IP grade: 65
- frames: iron
- Spindle: Stainless Steel
- Measurement Plane: Carbide Tip
- [Note] The maximum allowable error does not include quantization error (± 1 count).
- An optional wireless receiver (WI -1 M) is required to receive data.
- Our company's ANT + system is certified by Japan, FCC (US), CE (EU) and KCC (South Korea) (selected from major regions in chisel). Please contact us for use in other areas.
- Operating temperature range (°C): 10 -40
- Connection Unit for Data Transmission: WI - M1 (Wireless)
- Radio mode: ANT + (communication distance: 6 m or less)
Package size：148×357×41 mm 1.32 kg [About Package size]
| Order No. | 65-2724-73 | |
|---|---|---|
| Model No. | MCD-100IP65MW | |
| JAN Code | 4975846021174 | |
| Standard price |
JPY: 65,000
USD: 407.73
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
|
65-2724-70 | Digital S-Line Micrometer (IP 65) 0 -25 mm MCD-25IP65MW | MCD-25IP65MW | 1piece | JPY: 41,000 | USD: 257.18 |
|
|
|
65-2724-71 | Digital S-line Micrometer (IP 65) 25 -50 mm MCD-50IP65MW | MCD-50IP65MW | 1piece | JPY: 49,000 | USD: 307.36 |
|
|
|
65-2724-72 | Digital S-line Micrometer (IP 65) 50 -75 mm MCD-75IP65MW | MCD-75IP65MW | 1piece | JPY: 59,000 | USD: 370.09 |
|
|
|
65-2724-73 | Digital S-line Micrometer (IP 65) 75 -100 mm MCD-100IP65MW | MCD-100IP65MW | 1piece | JPY: 65,000 | USD: 407.73 |
|
