AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

65-2019-46　4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938

特徴

  • 31 Flute Taper Neck Radius End Mill for Processing High Hardness Materials.
  • Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
  • Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
  • Uses HARDMAX coat for long life in processing of high hardness materials.
  • Compatible with all coolant.
  • Shank taper angle is a guide.
  • If it is necessary to interfere with the work, be sure to measure and confirm.
  • Be careful of contact between the shank and the workpiece.

仕様

  • Blade diameter (mm): 6
  • Blade length (mm): 6
  • Total length (mm): 110
  • Shank diameter (mm): 10
  • Corner radius (mm): R 1.5
  • Effective length (mm): 9
  • Number of blades: 4
  • Helix angle: 45
  • Surface treatment: HARD MAX
  • Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
  • Material/Finish: Super MG
  • Mass: 74 g
  • Country of origin: Japan
  • Securities Code: 217 -8832
  •  
Order No. 65-2019-46
Model No.Model No. class="init"> 65-2019-46 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

取扱点数300万点
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

65-2019-46　4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938

特徴

  • 31 Flute Taper Neck Radius End Mill for Processing High Hardness Materials.
  • Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
  • Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
  • Uses HARDMAX coat for long life in processing of high hardness materials.
  • Compatible with all coolant.
  • Shank taper angle is a guide.
  • If it is necessary to interfere with the work, be sure to measure and confirm.
  • Be careful of contact between the shank and the workpiece.

仕様

  • Blade diameter (mm): 6
  • Blade length (mm): 6
  • Total length (mm): 110
  • Shank diameter (mm): 10
  • Corner radius (mm): R 1.5
  • Effective length (mm): 9
  • Number of blades: 4
  • Helix angle: 45
  • Surface treatment: HARD MAX
  • Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
  • Material/Finish: Super MG
  • Mass: 74 g
  • Country of origin: Japan
  • Securities Code: 217 -8832
  •  
アズワン品番 65-2019-46
型番 HTNRS4060-156938
JANコード 4560295111936
標準価格 JPY: 19,094 USD: 118.80
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity 1piece
在庫数
サプライヤ在庫

商品のバリエーション （サイズ違い・スペック違い・オプション品など）

商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
65-2019-19 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 6　HTNRS4010-020628 HTNRS4010-020628 1piece JPY: 8,125 USD: 50.55

65-2019-20 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 10　HTNRS4010-021028 HTNRS4010-021028 1piece JPY: 8,125 USD: 50.55

65-2019-21 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 20　HTNRS4010-022028 HTNRS4010-022028 1piece JPY: 8,125 USD: 50.55

65-2019-22 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 30　HTNRS4010-023028 HTNRS4010-023028 1piece JPY: 9,750 USD: 60.67

65-2019-23 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 6　HTNRS4015-030628 HTNRS4015-030628 1piece JPY: 8,125 USD: 50.55

65-2019-24 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 10　HTNRS4015-031028 HTNRS4015-031028 1piece JPY: 8,125 USD: 50.55

65-2019-25 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 20　HTNRS4015-032028 HTNRS4015-032028 1piece JPY: 8,125 USD: 50.55

65-2019-26 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 30　HTNRS4015-033028 HTNRS4015-033028 1piece JPY: 9,750 USD: 60.67

65-2019-27 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053028 HTNRS4020-053028 1piece JPY: 8,938 USD: 55.61

65-2019-28 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053038 HTNRS4020-053038 1piece JPY: 9,750 USD: 60.67

65-2019-29 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053058 HTNRS4020-053058 1piece JPY: 9,750 USD: 60.67

65-2019-30 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 40　HTNRS4020-054028 HTNRS4020-054028 1piece JPY: 11,375 USD: 70.78

65-2019-31 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 40　HTNRS4020-054038 HTNRS4020-054038 1piece JPY: 12,188 USD: 75.83

65-2019-32 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 42　HTNRS4020-054258 HTNRS4020-054258 1piece JPY: 13,406 USD: 83.41

65-2019-33 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 30　HTNRS4030-083028 HTNRS4030-083028 1piece JPY: 9,750 USD: 60.67

65-2019-34 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 30　HTNRS4030-083038 HTNRS4030-083038 1piece JPY: 9,750 USD: 60.67

65-2019-35 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 2.9 degrees x Blade Length 3 x Neck Length 33　HTNRS4030-083358 HTNRS4030-083358 1piece JPY: 13,406 USD: 83.41

65-2019-36 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 40　HTNRS4030-084028 HTNRS4030-084028 1piece JPY: 11,375 USD: 70.78

65-2019-37 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 40　HTNRS4030-084038 HTNRS4030-084038 1piece JPY: 11,375 USD: 70.78

65-2019-38 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 30　HTNRS4040-103038 HTNRS4040-103038 1piece JPY: 13,000 USD: 80.89

65-2019-39 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 2.9 degrees x Blade Length 4 x Neck Length 45　HTNRS4040-104558 HTNRS4040-104558 1piece JPY: 14,625 USD: 91.00

65-2019-40 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 49　HTNRS4040-104928 HTNRS4040-104928 1piece JPY: 12,188 USD: 75.83

65-2019-41 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 60　HTNRS4040-106028 HTNRS4040-106028 1piece JPY: 13,813 USD: 85.94

65-2019-42 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 67　HTNRS4040-106738 HTNRS4040-106738 1piece JPY: 18,688 USD: 116.28

65-2019-43 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 39　HTNRS4060-153938 HTNRS4060-153938 1piece JPY: 13,813 USD: 85.94

65-2019-44 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 2.9 degrees x Blade Length 6 x Neck Length 47　HTNRS4060-154758 HTNRS4060-154758 1piece JPY: 18,688 USD: 116.28

65-2019-45 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.4 degrees x Blade Length 6 x Neck Length 51　HTNRS4060-155128 HTNRS4060-155128 1piece JPY: 13,813 USD: 85.94

65-2019-46 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938 HTNRS4060-156938 1piece JPY: 19,094 USD: 118.80

This page is the page of 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.ASONEs="init"> 65-2019-46 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->

AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

65-2019-46　4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938

Features

  • 31 Flute Taper Neck Radius End Mill for Processing High Hardness Materials.
  • Cutting resistance is reduced by the corner R shape that smoothly connects from the tip to the outer periphery, and vibration is suppressed by the unequal division shape.
  • Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
  • Uses HARDMAX coat for long life in processing of high hardness materials.
  • Compatible with all coolant.
  • Shank taper angle is a guide.
  • If it is necessary to interfere with the work, be sure to measure and confirm.
  • Be careful of contact between the shank and the workpiece.

Spec

  • Blade diameter (mm): 6
  • Blade length (mm): 6
  • Total length (mm): 110
  • Shank diameter (mm): 10
  • Corner radius (mm): R 1.5
  • Effective length (mm): 9
  • Number of blades: 4
  • Helix angle: 45
  • Surface treatment: HARD MAX
  • Compatible Work Material: Pre-hardened Steel, Quenched Steel (55 HRC) (60 HRC) (65 HRC), Cast Iron
  • Material/Finish: Super MG
  • Mass: 74 g
  • Country of origin: Japan
  • Securities Code: 217 -8832
  •  
Order No. 65-2019-46
Model No. HTNRS4060-156938
JAN Code 4560295111936
Standard price JPY: 19,094 USD: 118.80
Excange rate 1USD= 160.72JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
65-2019-19 4-Flute Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 6　HTNRS4010-020628 HTNRS4010-020628 1piece JPY: 8,125 USD: 50.55

65-2019-20 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 10　HTNRS4010-021028 HTNRS4010-021028 1piece JPY: 8,125 USD: 50.55

65-2019-21 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 20　HTNRS4010-022028 HTNRS4010-022028 1piece JPY: 8,125 USD: 50.55

65-2019-22 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1 x Corner Radius R 0.2 x Neck Taper Angle 1.4 degrees x Blade Length 1 x Neck Length 30　HTNRS4010-023028 HTNRS4010-023028 1piece JPY: 9,750 USD: 60.67

65-2019-23 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 6　HTNRS4015-030628 HTNRS4015-030628 1piece JPY: 8,125 USD: 50.55

65-2019-24 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 10　HTNRS4015-031028 HTNRS4015-031028 1piece JPY: 8,125 USD: 50.55

65-2019-25 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 20　HTNRS4015-032028 HTNRS4015-032028 1piece JPY: 8,125 USD: 50.55

65-2019-26 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 1.5 x Corner Radius R 0.3 x Neck Taper Angle 1.4 degrees x Blade Length 1.5 x Neck Length 30　HTNRS4015-033028 HTNRS4015-033028 1piece JPY: 9,750 USD: 60.67

65-2019-27 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053028 HTNRS4020-053028 1piece JPY: 8,938 USD: 55.61

65-2019-28 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053038 HTNRS4020-053038 1piece JPY: 9,750 USD: 60.67

65-2019-29 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 30　HTNRS4020-053058 HTNRS4020-053058 1piece JPY: 9,750 USD: 60.67

65-2019-30 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.4 degrees x Blade Length 2 x Neck Length 40　HTNRS4020-054028 HTNRS4020-054028 1piece JPY: 11,375 USD: 70.78

65-2019-31 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 1.9 degrees x Blade Length 2 x Neck Length 40　HTNRS4020-054038 HTNRS4020-054038 1piece JPY: 12,188 USD: 75.83

65-2019-32 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 2 x Corner Radius R 0.5 x Neck Taper Angle 2.9 degrees x Blade Length 2 x Neck Length 42　HTNRS4020-054258 HTNRS4020-054258 1piece JPY: 13,406 USD: 83.41

65-2019-33 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 30　HTNRS4030-083028 HTNRS4030-083028 1piece JPY: 9,750 USD: 60.67

65-2019-34 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 30　HTNRS4030-083038 HTNRS4030-083038 1piece JPY: 9,750 USD: 60.67

65-2019-35 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 2.9 degrees x Blade Length 3 x Neck Length 33　HTNRS4030-083358 HTNRS4030-083358 1piece JPY: 13,406 USD: 83.41

65-2019-36 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.4 degrees x Blade Length 3 x Neck Length 40　HTNRS4030-084028 HTNRS4030-084028 1piece JPY: 11,375 USD: 70.78

65-2019-37 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 3 x Corner Radius R 0.8 x Neck Taper Angle 1.9 degrees x Blade Length 3 x Neck Length 40　HTNRS4030-084038 HTNRS4030-084038 1piece JPY: 11,375 USD: 70.78

65-2019-38 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 30　HTNRS4040-103038 HTNRS4040-103038 1piece JPY: 13,000 USD: 80.89

65-2019-39 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 2.9 degrees x Blade Length 4 x Neck Length 45　HTNRS4040-104558 HTNRS4040-104558 1piece JPY: 14,625 USD: 91.00

65-2019-40 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 49　HTNRS4040-104928 HTNRS4040-104928 1piece JPY: 12,188 USD: 75.83

65-2019-41 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.4 degrees x Blade Length 4 x Neck Length 60　HTNRS4040-106028 HTNRS4040-106028 1piece JPY: 13,813 USD: 85.94

65-2019-42 4-Flute Tapered Neck Radius End Mill, Outer Diameter 4 x Corner Radius R1 x Neck Taper Angle 1.9 degrees x Blade Length 4 x Neck Length 67　HTNRS4040-106738 HTNRS4040-106738 1piece JPY: 18,688 USD: 116.28

65-2019-43 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 39　HTNRS4060-153938 HTNRS4060-153938 1piece JPY: 13,813 USD: 85.94

65-2019-44 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 2.9 degrees x Blade Length 6 x Neck Length 47　HTNRS4060-154758 HTNRS4060-154758 1piece JPY: 18,688 USD: 116.28

65-2019-45 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.4 degrees x Blade Length 6 x Neck Length 51　HTNRS4060-155128 HTNRS4060-155128 1piece JPY: 13,813 USD: 85.94

65-2019-46 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69　HTNRS4060-156938 HTNRS4060-156938 1piece JPY: 19,094 USD: 118.80

This page is the page of 4 Flutes Tapered Neck Radius End Mill, Outer Diameter 6 x Corner Radius R 1.5 x Neck Taper Angle 1.9 degrees x Blade Length 6 x Neck Length 69 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.