AS ONE AS ONE

Listed products : 3 milion products
How to use
Cách sử dụng
Contact us
UNION TOOL CO.

65-2018-74　Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-6

Features

  • High rigidity is realized by adopting a tapered neck shape.
  • Even in deep carving, stable machining and high-quality machined surfaces have been achieved.
  • Uses HARDMAX coat that maintains high levels of heat resistance, toughness, and lubrication.
  • 65HRC high hardness material can also be cut.
  • Applicable Work Materials: Quenched Steel (~55HRC) (~60HRC) (~65HRC), Pre-Hardened Steel, Copper, Carbon Steel, Alloy Steel, Cast Iron, Titanium Alloy, Super Heat-Resistant Alloy
  • Shank Taper Angle is a guide.
  • If it is necessary to interfere with the work, be sure to measure and confirm.
  • Be careful of contact between the shank and the workpiece.

Spec

  • Ball radius (mm): R 0.3
  • Blade length (mm): 0.48
  • Total length (mm): 50
  • Shank diameter (mm): 4
  • Length Under Neck (mm): 12
  • Number of blades: 2
  • Helix angle: 30
  • Surface treatment: HARDMAX
  • Surface treatment: HM coating
  • Helix angle 30 degrees
  • Material/Finish: Ultrafine Grain Alloy (Super MG)
  • Mass: 10 g
  • Country of origin: Japan
  • Securities Code: 250 -2923
  •  
Order No. 65-2018-74
Model No. HTNB2006-120-6
JAN Code 4560295115484
Standard price JPY: 7,605 USD: 47.67
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity 1piece
Stock in Japan
Supplier Stock

Product Variations (Different Sizes, Specifications, Optional Products, etc.)

Product image Order No. Name Model No. Quantity Standard price Valid price in Japan Stock
[Supplier Stock]
65-2018-70 Carbide 2-Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 2 Neck Taper Angle x 0.48 Blade Length x Total Length 50　HTNB2006-080-4 HTNB2006-080-4 1piece JPY: 6,923 USD: 43.40

65-2018-71 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x 8 Neck Length x 3 Neck Taper Angle x 0.48 Blade Length x Total Length 50　HTNB2006-080-6 HTNB2006-080-6 1piece JPY: 6,923 USD: 43.40

65-2018-72 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-10 HTNB2006-120-10 1piece JPY: 7,605 USD: 47.67

65-2018-73 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-4 HTNB2006-120-4 1piece JPY: 7,605 USD: 47.67

65-2018-74 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-120-6 HTNB2006-120-6 1piece JPY: 7,605 USD: 47.67

65-2018-75 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-140-1 HTNB2006-140-1 1piece JPY: 7,605 USD: 47.67

65-2018-76 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-140-3 HTNB2006-140-3 1piece JPY: 7,605 USD: 47.67

65-2018-77 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-10 HTNB2006-200-10 1piece JPY: 10,156 USD: 63.66

65-2018-78 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 1 degree 30 "x Blade Length 0.48 x Total Length 50　HTNB2006-200-3 HTNB2006-200-3 1piece JPY: 10,156 USD: 63.66

65-2018-79 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-4 HTNB2006-200-4 1piece JPY: 10,156 USD: 63.66

65-2018-80 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50　HTNB2006-200-6 HTNB2006-200-6 1piece JPY: 10,156 USD: 63.66

65-2018-81 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-10 HTNB2010-120-10 1piece JPY: 6,143 USD: 38.51

65-2018-82 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-4 HTNB2010-120-4 1piece JPY: 6,143 USD: 38.51

65-2018-83 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-120-6 HTNB2010-120-6 1piece JPY: 6,143 USD: 38.51

65-2018-84 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-140-1 HTNB2010-140-1 1piece JPY: 6,143 USD: 38.51

65-2018-85 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 14 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-140-3 HTNB2010-140-3 1piece JPY: 6,143 USD: 38.51

65-2018-86 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-160-4 HTNB2010-160-4 1piece JPY: 6,143 USD: 38.51

65-2018-87 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 50　HTNB2010-160-6 HTNB2010-160-6 1piece JPY: 6,143 USD: 38.51

65-2018-88 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-180-1 HTNB2010-180-1 1piece JPY: 6,143 USD: 38.51

65-2018-89 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 18 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 50　HTNB2010-180-3 HTNB2010-180-3 1piece JPY: 6,143 USD: 38.51

65-2018-90 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 5 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-200-10 HTNB2010-200-10 1piece JPY: 7,800 USD: 48.89

65-2018-91 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 60　HTNB2010-200-4 HTNB2010-200-4 1piece JPY: 7,800 USD: 48.89

65-2018-92 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 60　HTNB2010-200-6 HTNB2010-200-6 1piece JPY: 7,800 USD: 48.89

65-2018-93 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 29.8 x Neck Taper Angle 3 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-298-6 HTNB2010-298-6 1piece JPY: 8,580 USD: 53.78

65-2018-94 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 30 "x Blade Length 0.8 x Total Length 70　HTNB2010-300-1 HTNB2010-300-1 1piece JPY: 8,580 USD: 53.78

65-2018-95 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree x Blade Length 0.8 x Total Length 70　HTNB2010-300-2 HTNB2010-300-2 1piece JPY: 8,580 USD: 53.78

65-2018-96 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 1 degree 30 "x Blade Length 0.8 x Total Length 70　HTNB2010-300-3 HTNB2010-300-3 1piece JPY: 8,580 USD: 53.78

65-2018-97 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.5 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 0.8 x Total Length 70　HTNB2010-300-4 HTNB2010-300-4 1piece JPY: 8,580 USD: 53.78

65-2018-98 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-120-4 HTNB2015-120-4 1piece JPY: 6,435 USD: 40.34

65-2018-99 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-120-6 HTNB2015-120-6 1piece JPY: 6,435 USD: 40.34

65-2019-01 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-160-4 HTNB2015-160-4 1piece JPY: 7,020 USD: 44.00

65-2019-02 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 16 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-160-6 HTNB2015-160-6 1piece JPY: 7,020 USD: 44.00

65-2019-03 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-200-4 HTNB2015-200-4 1piece JPY: 7,020 USD: 44.00

65-2019-04 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 20 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 60　HTNB2015-200-6 HTNB2015-200-6 1piece JPY: 7,020 USD: 44.00

65-2019-05 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 2 degrees x Blade Length 1.2 x Total Length 70　HTNB2015-300-4 HTNB2015-300-4 1piece JPY: 8,970 USD: 56.23

65-2019-06 Carbide 2 Flute Tapered Neck Ball End Mill, R 0.75 x Neck Length 30 x Neck Taper Angle 3 degrees x Blade Length 1.2 x Total Length 70　HTNB2015-300-6 HTNB2015-300-6 1piece JPY: 8,970 USD: 56.23

65-2019-07 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x Under-Neck Length 10 x Neck Taper Angle 1 degrees 30 "x Blade Length 1.6 x Total Length 60　HTNB2020-100-3 HTNB2020-100-3 1piece JPY: 6,581 USD: 41.25

65-2019-08 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-120-4 HTNB2020-120-4 1piece JPY: 6,581 USD: 41.25

65-2019-09 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 12 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-120-6 HTNB2020-120-6 1piece JPY: 6,581 USD: 41.25

65-2019-10 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-160-4 HTNB2020-160-4 1piece JPY: 6,581 USD: 41.25

65-2019-11 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 16 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-160-6 HTNB2020-160-6 1piece JPY: 6,581 USD: 41.25

65-2019-12 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-200-4 HTNB2020-200-4 1piece JPY: 7,020 USD: 44.00

65-2019-13 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 20 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 60　HTNB2020-200-6 HTNB2020-200-6 1piece JPY: 7,020 USD: 44.00

65-2019-14 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 70　HTNB2020-300-4 HTNB2020-300-4 1piece JPY: 9,295 USD: 58.27

65-2019-15 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 30 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 70　HTNB2020-300-6 HTNB2020-300-6 1piece JPY: 9,295 USD: 58.27

65-2019-16 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 2 Neck Taper Angle x 1.6 Blade Length x Total Length 80　HTNB2020-400-4 HTNB2020-400-4 1piece JPY: 11,359 USD: 71.20

65-2019-17 Carbide 2-Flute Tapered Neck Ball End Mill, R1 x 40 Neck Length x 3 Neck Taper Angle x 1.6 Blade Length x Total Length 80　HTNB2020-400-6 HTNB2020-400-6 1piece JPY: 11,359 USD: 71.20

65-2019-18 Carbide 2-Flute Tapered Neck Ball End Mill, R2 x Neck Length 60 x Neck Taper Angle 1 degree 30 "x Blade Length 3.2 x Total Length 120　HTNB2040-600-3 HTNB2040-600-3 1piece JPY: 22,750 USD: 142.61

This page is the page of Carbide 2 Flute Tapered Neck Ball End Mill, R 0.3 x Neck Length 12 x Neck Taper Angle 3 degrees x Blade Length 0.48 x Total Length 50 sold by AS ONE CORPORATION. AXEL GLOBAL is a website that lists more than 3 million products that are used in a wide range of fields, including Research and Development, Production,Semiconductor, Medicine, Nursing care, and Food sanitation.